Pontiac Solstice (2006 year). Manual - part 17

 

  Index      Pontiac     Pontiac Solstice (2006 year) - manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

Content      ..     15      16      17      18     ..

 

 

Pontiac Solstice (2006 year). Manual - part 17

 

 

Do not clean your vehicle using the following cleaners
or techniques:

Never use a knife or any other sharp object to
remove a soil from any interior surface.

Never use a stiff brush. It can cause damage to
your vehicle’s interior surfaces.

Never apply heavy pressure or rub aggressively
with a cleaning cloth. Use of heavy pressure
can damage your interior and does not improve the
effectiveness of soil removal.

Use only mild, neutral-pH soaps. Avoid laundry
detergents or dishwashing soaps with degreasers.
Using too much soap will leave a residue that
leaves streaks and attracts dirt. For liquid cleaners,
about 20 drops per gallon (3.78 L) of water is a
good guide.

Do not heavily saturate your upholstery
while cleaning.

Damage to your vehicle’s interior may result from
the use of many organic solvents such as naptha,
alcohol, etc.

Fabric/Carpet

Use a vacuum cleaner with a soft brush attachment
frequently to remove dust and loose dirt. A canister
vacuum with a beater bar in the nozzle may only be used
on floor carpet and carpeted floor mats. For soils, always
try to remove them first with plain water or club soda.
Before cleaning, gently remove as much of the soil as
possible using one of the following techniques:

For liquids: gently blot the remaining soil with a paper
towel. Allow the soil to absorb into the paper towel
until no more can be removed.

For solid dry soils: remove as much as possible and
then vacuum.

To clean, use the following instructions:

1. Saturate a lint-free, clean white cloth with water or

club soda.

2. Wring the cloth to remove excess moisture.
3. Start on the outside edge of the soil and gently rub

toward the center. Continue cleaning, using a clean
area of the cloth each time it becomes soiled.

4. Continue to gently rub the soiled area until the

cleaning cloth remains clean.

5. If the soil is not completely removed, use a mild

soap solution and repeat the cleaning process
that was used with plain water.

5-70

-------------------------------------------------------------------------------------------------------------------------------------------------------------

If any of the soil remains, a commercial fabric cleaner or
spot lifter may be necessary. When a commercial
upholstery cleaner or spot lifter is to be used, test a
small hidden area for colorfastness first. If the locally
cleaned area gives any impression that a ring formation
may result, clean the entire surface.

After the cleaning process has been completed, a paper
towel can be used to blot excess moisture from the
fabric or carpet.

Leather

A soft cloth dampened with water may be used to
remove dust. If a more thorough cleaning is necessary,
a soft cloth dampened with a mild soap solution can
be used. Allow the leather to dry naturally. Do not use
heat to dry. Never use steam to clean leather. Never
use spot lifters or spot removers on leather. Many
commercial leather cleaners and coatings that are sold
to preserve and protect leather may permanently
change the appearance and feel of your leather and are
not recommended. Do not use silicone or wax-based
products, or those containing organic solvents to clean
your vehicle’s interior because they can alter the
appearance by increasing the gloss in a non-uniform
manner. Never use shoe polish on your leather.

Instrument Panel, Vinyl, and Other
Plastic Surfaces

A soft cloth dampened with water may be used to
remove dust. If a more thorough cleaning is necessary,
a clean soft cloth dampened with a mild soap solution
can be used to gently remove dust and dirt. Never use
spot lifters or removers on plastic surfaces. Many
commercial cleaners and coatings that are sold to
preserve and protect soft plastic surfaces may
permanently change the appearance and feel of your
interior and are not recommended. Do not use silicone
or wax-based products, or those containing organic
solvents to clean your vehicle’s interior because
they can alter the appearance by increasing the gloss in
a non-uniform manner.

Some commercial products may increase gloss on your
instrument panel. The increase in gloss may cause
annoying reflections in the windshield and even make it
difficult to see through the windshield under certain
conditions.

5-71

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Care of Safety Belts

Keep belts clean and dry.

{

CAUTION:

Do not bleach or dye safety belts. If you do, it
may severely weaken them. In a crash, they
might not be able to provide adequate
protection. Clean safety belts only with mild
soap and lukewarm water.

Weatherstrips

Silicone grease on weatherstrips will make them last
longer, seal better, and not stick or squeak. Apply
silicone grease with a clean cloth. During very cold,
damp weather frequent application may be required. See
Part D: Recommended Fluids and Lubricants on
page 6-21
.

Washing Your Vehicle

The paint finish on the vehicle provides beauty, depth of
color, gloss retention, and durability.

The best way to preserve the vehicle’s finish is to keep it
clean by washing it often with lukewarm or cold water.

Do not wash the vehicle in the direct rays of the sun.
Use a car washing soap. Do not use strong soaps
or chemical detergents. Be sure to rinse the vehicle well,
removing all soap residue completely. GM-approved
cleaning products can be obtained from your dealer. See
Vehicle Care/Appearance Materials on page 5-76. Do
not use cleaning agents that are petroleum based,
or that contain acid or abrasives. All cleaning agents
should be flushed promptly and not allowed to dry on the
surface, or they could stain. Dry the finish with a soft,
clean chamois or an all-cotton towel to avoid surface
scratches and water spotting.

High pressure car washes may cause water to enter
the vehicle.

Cleaning Exterior Lamps/Lenses

Use only lukewarm or cold water, a soft cloth and a car
washing soap to clean exterior lamps and lenses.
Follow instructions under Washing Your Vehicle on
page 5-72
.

5-72

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Finish Care

Occasional waxing or mild polishing of the vehicle by
hand may be necessary to remove residue from
the paint finish. GM-approved cleaning products can be
obtained from your dealer. See Vehicle
Care/Appearance Materials 
on page 5-76.

Notice: Machine compounding or aggressive
polishing on a basecoat/clearcoat paint finish may
damage it. Use only non-abrasive waxes and
polishes that are made for a basecoat/clearcoat
paint finish on your vehicle.

The vehicle has a “basecoat/clearcoat” paint finish. The
clearcoat gives more depth and gloss to the colored
basecoat. Always use waxes and polishes that are
non-abrasive and made for a basecoat/clearcoat
paint finish.

Foreign materials such as calcium chloride and other
salts, ice melting agents, road oil and tar, tree sap, bird
droppings, chemicals from industrial chimneys, etc.,
can damage the vehicle’s finish if they remain on painted
surfaces. Wash the vehicle as soon as possible. If
necessary, use non-abrasive cleaners that are marked
safe for painted surfaces to remove foreign matter.

Exterior painted surfaces are subject to aging,
weather, and chemical fallout that can take their toll
over a period of years. To help keep the paint
finish looking new, keep the vehicle in a garage or
covered whenever possible.

Windshield and Wiper Blades

If the windshield is not clear after using the windshield
washer, or if the wiper blade chatters when running,
wax, sap, or other material may be on the blade
or windshield.

Clean the outside of the windshield with a glass
cleaning liquid or powder and water solution. The
windshield is clean if beads do not form when it is
rinsed with water.

Grime from the windshield will stick to the wiper blades
and affect their performance. Clean the blade by
wiping vigorously with a cloth soaked in full-strength
windshield washer solvent. Then rinse the blade
with water.

Check the wiper blades and clean them as necessary;
replace blades that look worn.

5-73

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Convertible Top

The vehicle’s convertible top should be cleaned often.
However, high pressure car washes may cause water to
enter your vehicle.

When you hand wash the top, do it in partial shade.
Use a mild soap, lukewarm water and a soft sponge.
A chamois or cloth may leave lint on the top, and
a brush can chafe the threads in the top fabric. Do
not use detergents, harsh cleaners, solvents or
bleaching agents.

Wet the entire vehicle and wash the top evenly to avoid
spots or rings. Let the soap remain on the fabric for
a few minutes. When the top is really dirty, use a mild
foam-type cleaner. Thoroughly rinse the entire
vehicle, then let the top dry in direct sunlight.

To protect the convertible top:

After you wash the vehicle, make sure the top is
completely dry before you lower it.

Do not get any cleaner on the vehicle’s painted
finish; it could leave streaks.

If you decide to go through an automatic car wash,
ask the manager if the equipment could damage
your top.

Aluminum or Chrome-Plated Wheels

The vehicle may be equipped with either aluminum or
chrome-plated wheels.

Keep the wheels clean using a soft clean cloth with mild
soap and water. Rinse with clean water. After rinsing
thoroughly, dry with a soft clean towel. A wax may then
be applied.

Notice: If you use strong soaps, chemicals,
abrasive polishes, cleaners, brushes, or cleaners
that contain acid on aluminum or chrome-plated
wheels, you could damage the surface of the
wheel(s). The repairs would not be covered by your
warranty. Use only GM-approved cleaners on
aluminum or chrome-plated wheels.

The surface of these wheels is similar to the painted
surface of your vehicle. Do not use strong soaps,
chemicals, abrasive polishes, abrasive cleaners,
cleaners with acid, or abrasive cleaning brushes on
them because you could damage the surface. Do not
use chrome polish on aluminum wheels.

Notice: Using chrome polish on aluminum wheels
could damage the wheels. The repairs would not
be covered by your warranty. Use chrome polish on
chrome wheels only.

Use chrome polish only on chrome-plated wheels, but
avoid any painted surface of the wheel, and buff off
immediately after application.

5-74

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Notice: If you drive your vehicle through an
automatic car wash that has silicone carbide tire
cleaning brushes, you could damage the aluminum
or chrome-plated wheels. The repairs would not
be covered by your warranty. Never drive a vehicle
equipped with aluminum or chrome-plated wheels
through an automatic car wash that uses silicone
carbide tire cleaning brushes.

Do not take your vehicle through an automatic car wash
that has silicone carbide tire cleaning brushes. These
brushes can also damage the surface of these wheels.

Tires

To clean the tires, use a stiff brush with tire cleaner.

Notice: Using petroleum-based tire dressing
products on your vehicle may damage the paint
finish and/or tires. When applying a tire dressing,
always wipe off any overspray from all painted
surfaces on your vehicle.

Sheet Metal Damage

If the vehicle is damaged and requires sheet metal
repair or replacement, make sure the body repair shop
applies anti-corrosion material to parts repaired or
replaced to restore corrosion protection.

Original manufacturer replacement parts will provide the
corrosion protection while maintaining the warranty.

Finish Damage

Any stone chips, fractures or deep scratches in the
finish should be repaired right away. Bare metal
will corrode quickly and may develop into major
repair expense.

Minor chips and scratches can be repaired with touch-up
materials available from your GM dealer. Larger areas of
finish damage can be corrected in your GM dealer’s body
and paint shop.

Underbody Maintenance

Chemicals used for ice and snow removal and dust
control can collect on the underbody. If these are not
removed, corrosion and rust can develop on the
underbody parts such as fuel lines, frame, floor pan,
and exhaust system even though they have corrosion
protection.

At least every spring, flush these materials from the
underbody with plain water. Clean any areas where mud
and debris can collect. Dirt packed in close areas of
the frame should be loosened before being flushed.
Your dealer or an underbody car washing system can
do this for you.

5-75

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Chemical Paint Spotting

Some weather and atmospheric conditions can create a
chemical fallout. Airborne pollutants can fall upon and
attack painted surfaces on the vehicle. This damage can
take two forms: blotchy, ring-shaped discolorations,
and small, irregular dark spots etched into the
paint surface.

Although no defect in the paint job causes this, GM will
repair, at no charge to the owner, the surfaces of
new vehicles damaged by this fallout condition within
12 months or 12,000 miles (20 000 km) of purchase,
whichever occurs first.

Vehicle Care/Appearance Materials

Description

Usage

Polishing Cloth
Wax-Treated

Interior and exterior
polishing cloth.

Tar and Road Oil
Remover

Removes tar, road oil
and asphalt.

Chrome Cleaner and
Polish

Use on chrome or
stainless steel.

Vinyl Cleaner

Cleans vinyl.

Glass Cleaner

Removes dirt, grime,
smoke and fingerprints.

Description

Usage

Chrome and Wire Wheel
Cleaner

Removes dirt and grime
from chrome wheels and
wire wheel covers.

Finish Enhancer

Removes dust,
fingerprints, and surface
contaminants. Spray on
wipe off.

Swirl Remover Polish

Removes swirl marks, fine
scratches and other light
surface contamination.

Cleaner Wax

Removes light scratches
and protects finish.

Foaming Tire Shine Low
Gloss

Cleans, shines and
protects in one easy step,
no wiping necessary.

Wash Wax Concentrate

Medium foaming
shampoo. Cleans and
lightly waxes.
Biodegradable and
phosphate free.

Spot Lifter

Quickly and easily
removes spots and stains
from carpets, vinyl and
cloth upholstery.

Odor Eliminator

Odorless spray odor
eliminator used on fabrics,
vinyl, leather and carpet.

5-76

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Vehicle Identification

Vehicle Identification Number (VIN)

This is the legal identifier for your vehicle. It appears on
a plate in the front corner of the instrument panel, on
the driver’s side. You can see it if you look through the
windshield from outside your vehicle. The VIN also
appears on the Vehicle Certification and Service Parts
labels and the certificates of title and registration.

Engine Identification

The eighth character in the VIN is the engine code.
This code will help you identify your vehicle’s engine,
specifications, and replacement parts.

Service Parts Identification Label

You will find this label on the inside of the glove box.
It is very helpful if you ever need to order parts.
On this label, you will find the following:

VIN

Model designation

Paint information

Production options and special equipment

Be sure that this label is not removed from the vehicle.

Electrical System

Add-On Electrical Equipment

Notice: Don’t add anything electrical to your vehicle
unless you check with your dealer first. Some
electrical equipment can damage your vehicle and
the damage wouldn’t be covered by your warranty.
Some add-on electrical equipment can keep other
components from working as they should.

Your vehicle has an airbag system. Before attempting to
add anything electrical to your vehicle, see Servicing
Your Airbag-Equipped Vehicle 
on page 1-41.

5-77

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Headlamp Wiring

The headlamp wiring is protected by fuses. An electrical
overload will cause the lamps to remain off. If this
happens, have your headlamp wiring checked right away.

Power Windows and Other Power
Options

Circuit breakers protect the power windows and other
power accessories. When the current load is too heavy,
the circuit breaker opens and closes, protecting the
circuit until the problem is fixed or goes away.

Fuses and Circuit Breakers

The wiring circuits in your vehicle are protected from
short circuits by a combination of J-Case fuses,
mini-fuses and circuit breakers. This greatly reduces the
chance of fires caused by electrical problems.

Look at the silver-colored band inside the fuse. If the
band is broken or melted, replace the fuse. Be sure you
replace a bad fuse with a new one of the identical size
and rating.

If you ever have a problem on the road and do not have
a spare fuse, you can borrow one that has the same
amperage. Just pick some feature of your vehicle
that you can get along without – like the radio or
cigarette lighter – and use its fuse, if it is the correct
amperage. Replace it as soon as you can.

Floor Console Fuse Block

The floor console fuse block is located on the
passenger’s side of the vehicle under the carpet.

Remove the fuse block cover to access the fuses.
Use the fuse puller to remove fuses.

5-78

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Fuses

Usage

1

Fuse Puller

2

Spare

3

Spare

4

Spare

5

Spare

6

Amplifier

7

Cluster

8

Ignition Switch, PassKey 3+

9

Spare

Fuses

Usage

10

Climate Control System, PassKey 3+

11

Empty

12

Spare

13

Airbag

14

Spare

15

Wiper

16

Climate Control System, Ignition

17

Blank

18

Blank

19

Steering Wheel Controls

20

Spare

21

Spare

22

Blank

23

Radio

24

Sensing and Diagnostic Module

25

Engine Control Module,
Transmission Control Module

26

Door Locks

27

Interior Lamps

28

Blank

29

Power Windows

30

Climate Control System

31

Blank

32

Retained Accessory Power

5-79

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Underhood Fuse Block

The underhood fuse block is located in the engine
compartment on the passenger’s side of the vehicle.

Lift the cover for access to the fuse block.

To remove fuses, use the fuse puller, or hold the end of
the fuse between your thumb and index finger and
pull straight out.

See Engine Compartment Overview on page 5-12 for
more information on location.

Fuses

Usage

1

Empty

2

Rear Window Defogger

Fuses

Usage

3

Empty

4

Body Control Module 3

5

Crank

6

Body Control Module 2

7

Body Control Module

8

Cooling Fan 2

9

Empty

10

Trunk

11

Trunk

12

Empty

13

Fuel Pump

14

Rear Defogger Relay

15

Air Conditioning Clutch

16

Empty

17

Empty

18

Trunk Release

19

Fuel Pump

20

Empty

21

Mirrors

22

Air Conditioning

23

Empty

24

Cooling Fan 2 Relay

25

Fuse Puller

26

Powertrain Relay

5-80

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Fuses

Usage

27

Empty

28

Empty

29

Data Link Connector

30

Outlet

31

Empty

32

Empty

33

Emissions

34

Crank Relay

35

Empty

36

Empty

37

Empty

38

Empty

39

Empty

40

Cooling Fan

41

Empty

42

Engine Control Module

43

Engine Control Module, Transmission

44

Anti-lock Brake System

45

Injectors, Ignition Module

46

Back-up Lamps

47

Empty

48

Empty

49

Low Beam Daytime Running Lamps

Fuses

Usage

50

Low Beam Daytime Running Lamps Relay

51

Run, Crank Relay

52

Windshield Wiper Relay

53

Fog Lamps

54

Fog Lamps Relay

55

Horn

56

S Band, OnStar

®

57

Anti-lock Brake System

58

Wiper Diode

59

Windshield Wiper

60

Horn

61

Anti-lock Brake System

62

Instrument Panel Ignition

63

Driver’s Side High Beam

64

Canister Vent

65

Driver’s Side Low Beam

66

Passenger’s Side Low Beam

67

Passenger’s Side High Beam

68

Parking Lamps Relay

69

Parking Lamps

70

Windshield Wiper Relay

71

Low Beam

72

High Beam

5-81

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Capacities and Specifications

The following approximate capacities are given in English and metric conversions. Please refer to
Part D: Recommended Fluids and Lubricants on page 6-21 for more information.

Application

Capacities

English

Metric

Cooling System

7.9 qt

7.5 L

Engine Oil with Filter

5.0 qt

4.7 L

Fuel Tank

13.8 gal

62.7 L

Transmission, Automatic (Complete Drain and Refill)

9.5 qt

9.0 L

Transmission, Manual (Complete Drain and Refill)

2.75 qt

2.6 L

Wheel Nut Torque

100 lb ft

140

Y

All capacities are approximate. When adding, be sure to fill to the appropriate level, as recommended in
this manual.

Engine Specifications

Engine

VIN Code

Transmission

Spark Plug Gap

2.4L L4

B

Automatic

Manual

0.042 inch (1.06 mm)

5-82

-------------------------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Maintenance Schedule

Introduction

Important: Keep engine oil at the proper level and
change as recommended.

Have you purchased the GM Protection Plan? The Plan
supplements your new vehicle warranties. See your
Warranty and Owner Assistance booklet or your dealer
for details.

Maintenance Requirements

Maintenance intervals, checks, inspections and
recommended fluids and lubricants as prescribed in this
manual are necessary to keep your vehicle in good
working condition. Any damage caused by failure to
follow scheduled maintenance may not be covered by
warranty.

Your Vehicle and the Environment

Proper vehicle maintenance not only helps to keep your
vehicle in good working condition, but also helps the
environment. Improper vehicle maintenance can even
affect the quality of the air we breathe. Improper fluid
levels or the wrong tire inflation can increase the level
of emissions from your vehicle. To help protect our
environment, and to keep your vehicle in good condition,
be sure to maintain your vehicle properly.

How This Section is Organized

This maintenance schedule is divided into five parts:

“Part A: Scheduled Maintenance Services” explains
what to have done and how often. Some of these
services can be complex, so unless you are technically
qualified and have the necessary equipment, you should
let your GM dealer’s service department do these jobs.

Your GM dealer has GM-trained and supported service
people that will perform the work using genuine GM parts.

6-2

-------------------------------------------------------------------------------------------------------------------------------------------------------------

{

CAUTION:

Performing maintenance work on a vehicle can
be dangerous. In trying to do some jobs, you
can be seriously injured. Do your own
maintenance work only if you have the required
know-how and the proper tools and equipment
for the job. If you have any doubt, have a
qualified technician do the work. See Doing
Your Own Service Work 
on page 5-4.

If you want to purchase service information, see Service
Publications Ordering Information 
on page 7-15.

“Part B: Owner Checks and Services” tells you what
should be checked and when. It also explains what
you can easily do to help keep your vehicle in good
condition.

“Part C: Periodic Maintenance Inspections” explains
important inspections that your dealer’s service
department can perform for you.

“Part D: Recommended Fluids and Lubricants” lists
some recommended products necessary to help keep
your vehicle properly maintained. These products, or their
equivalents, should be used whether you do the work
yourself or have it done.

“Part E: Maintenance Record” is a place for you to
record and keep track of the maintenance performed on
your vehicle. Keep your maintenance receipts. They
may be needed to qualify your vehicle for warranty
repairs.

6-3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     15      16      17      18     ..