MINI Clubman (2018 year). Manual

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving comfort

CONTROLS

Safety information

▷ Do not cover sensors, for instance with

stickers, bicycle racks.

WARNING

▷ Keep the sensors clean and unobstructed.

The system does not relieve from per-

sonal responsibility to assess the traffic situa-

Switching on/off

tion. There is a risk of an accident. Adjust driv-

ing style to traffic conditions. Watch traffic and

Switching on automatically

vehicle surroundings closely and actively inter-

vene where appropriate.◀

The system switches on automatically in the

following situations:

WARNING

▷ If selector lever position R is engaged when

Due to high speeds when PDC Park Dis-

the engine is running.

tance Control is activated, the warning can be

The rearview camera also switches on.

delayed due to physical circumstances. There is

▷ With front PDC: when obstacles are de-

a risk of injury or risk of damage to property.

tected behind or in front of the vehicle by

Avoid approaching an object too fast. Avoid

PDC and the speed is slower than approx.

driving off fast while PDC Park Distance Control

2.5 mph/4 km/h.

is not yet active.◀

With front PDC: automatic activation on obsta-

cle detection can be switched off. Via the Cen-

Overview

tral Information Display (CID):

With front PDC: button in vehicle

"My MINI"

2. "Vehicle settings"

3. "Parking"

4. "Automatic PDC activation": only with re-

spective equipment.

5. "Automatic PDC activation"

The setting is stored for the driver profile

currently used.

Automatic deactivation during forward

Park assistance button

travel

The system switches off when a certain driving

Ultrasound sensors

distance or speed is exceeded.

Switch the system back on, if needed.

Ultrasound sensors of the PDC,

for instance in the bumpers.

With front PDC: switching on/off

manually

Press park assistance button.

Functional requirements

▷ On: the LED lights up.

Ensure full functionality:

▷ Off: the LED goes out.

163

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CONTROLS

Driving comfort

The rearview camera image is displayed if the

A display appears as soon as Park Distance

reverse gear is engaged when pressing the

Control (PDC) is activated.

park assistance button.

The range of the sensors is represented in col-

ors: red, green and yellow.

WARNING

When the image of the rearview camera is dis-

played, the switch can be made to PDC:

Signal tones

"Rear view camera"

When approaching an object, an intermittent

sound indicates the position of the object. E.g.,

System limits

if an object is detected to the left rear of the ve-

hicle, a signal tone sounds from the left rear

Safety information

speaker.

WARNING

The shorter the distance to the object, the

shorter the intervals.

The system can react not at all, too late,

incorrectly, or without justification due to the

If the distance to a detected object is less than

system limits. There is a risk of accidents or risk

approx. 10 inches/25 cm, a continuous tone is

of damage to property. Follow the information

sounded.

regarding the system limits and actively inter-

With front PDC: if objects are simultaneously lo-

vene, if needed.◀

cated both in front of and behind the vehicle,

an alternating continuous signal is sounded.

Limits of ultrasonic measurement

The signal tone is switched off, when selector

Ultrasonic measuring might not function under

lever position P is engaged on vehicles with

the following circumstances:

Steptronic transmission.

▷

For small children and animals.

Volume

▷

For persons with certain clothing, for in-

The ratio of the PDC signal tone volume to the

stance coats.

entertainment volume can be adjusted.

▷

With external interference of the ultra-

Via the Central Information Display (CID):

sound, for instance from passing vehicles or

loud machines.

"My MINI"

▷

When sensors are dirty, iced over, damaged

2. "System settings"

or out of position.

3. "Tone"

▷

If cargo protrudes.

4. "Volume settings"

▷

Under certain weather conditions such as

5. "PDC"

high relative humidity, wet conditions,

6. Set the desired value.

snowfall, extreme heat, or strong wind.

The setting is stored for the driver profile cur-

▷

With tow bars and trailer couplings of other

rently used.

vehicles.

▷

With thin or wedge-shaped objects.

Visual warning

▷

With moving objects.

The approach of the vehicle to an object can be

▷

With elevated, protruding objects such as

shown on the Control Display. Objects that are

ledges or cargo.

farther away are already displayed on the Con-

▷

With objects with corners and sharp edges.

trol Display before a signal sounds.

164

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving comfort

CONTROLS

▷ With objects with a fine surface structure

Red symbol is displayed, and the range

such as fences.

of the sensors is dimmed on the Control

Display.

▷ For objects with porous surfaces.

▷ Low objects already displayed, for instance

PDC has failed. Have the system checked by a

curbs, can move into the blind area of the

dealer’s service center or another qualified

sensors before or after a continuous tone

service center or repair shop.

sounds.

False warnings

Rearview camera

The system may issue a warning under the fol-

lowing conditions even though there is no ob-

Concept

stacle within the detection range:

The rearview camera provides assistance in

▷

In heavy rain.

parking and maneuvering backwards. The area

▷

When sensors are very dirty or covered with

behind the vehicle is shown on the Control Dis-

ice.

play.

▷

When sensors are covered in snow.

Safety information

▷

On rough road surfaces.

WARNING

▷

On uneven surfaces, such as speed bumps.

The system does not relieve from per-

▷

In large buildings with right angles and

sonal responsibility to assess the traffic situa-

smooth walls, for instance in underground

tion. There is a risk of an accident. Adjust driv-

garages.

ing style to traffic conditions. Watch traffic and

▷

In automatic vehicle washes.

vehicle surroundings closely and actively inter-

▷

Due to heavy exhaust.

vene where appropriate.◀

▷

Due to other ultrasound sources, for in-

stance sweeping machines, high pressure

Overview

steam cleaners or neon lights.

The malfunction is signaled by a continuous

If the vehicle is equipped accordingly:

tone alternating between the front and rear

button in the vehicle

speakers. As soon as the malfunction due

to other ultrasound sources is no longer

present, the system is again fully functional.

With front PDC: to reduce false alarms, switch

off automatic PDC activation on obstacle detec-

tion, for instance in vehicle washes; see Switch-

ing on/off.

Malfunction

A Check Control message is displayed in the in-

Park assistance button

strument cluster.

165

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CONTROLS

Driving comfort

Camera

"Rear view camera"

The rearview camera image is displayed.

Display on the Control Display

Functional requirement

▷ The rearview camera is switched on.

▷ Split doors are completely closed.

▷ Keep the recording range of the camera

clear. Protruding cargo or carrier systems

The camera lens is located between the license

and trailers that are not connected to a

plate lights.

trailer power socket can lead to malfunc-

tions.

The image quality may be impaired by dirt. If

necessary, clean the camera lens.

Activating the assistance functions

More than one assistance function can be ac-

Switching on/off

tive at the same time.

Switching on automatically

▷ Parking aid lines

The system is switched on automatically if se-

"Parking aid lines"

lector lever position R is engaged when the en-

Lanes and turning radius are indicated.

gine is running.

▷ Obstacle marking

Automatic deactivation during forward

"Obstacle marking"

travel

If the vehicle is equipped accordingly, ob-

The system switches off when a certain driving

stacles are highlighted.

distance or speed is exceeded.

Pathway lines

Switch the system back on, if needed.

If the vehicle is equipped accordingly:

switching on/off manually

Press park assistance button.

▷ On: the LED lights up.

▷ Off: the LED goes out.

The PDC is shown on the Control Display.

The rearview camera image is displayed if the

Pathway lines can be superimposed on the im-

reverse gear is engaged when pressing the

age of the rearview camera.

park assistance button.

Pathway lines help you to estimate the space

required when parking and maneuvering on

Switching the view via the Central

level roads.

Information Display (CID)

With PDC Park Distance Control activated:

166

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving comfort

CONTROLS

Pathway lines depend on the current steering

Parking using pathway and turning

angle and are continuously adjusted to the

radius lines

steering wheel movements.

1. Position the vehicle so that the turning ra-

dius lines lead to within the limits of the

parking space.

Turning radius lines

Turning radius lines can be superimposed on

2. Turn the steering wheel to the point where

the image of the rearview camera.

the pathway line covers the corresponding

turning radius line.

Turning radius lines show the course of the

smallest possible turning radius on a level road.

Only one turning radius line is displayed after

the steering wheel is turned past a certain an-

gle.

Obstacle marking

Display settings

Brightness

With the rearview camera switched on:

Select the symbol.

2. Turn the Controller until the desired setting

If the vehicle is equipped accordingly, obstacle

is reached and press the Controller.

markings can be faded into the image of the

rearview camera.

Contrast

The colored thresholds of the obstacle mark-

With the rearview camera switched on:

ings match the markings of the PDC Park Dis-

tance Control.

Select the symbol.

2. Turn the Controller until the desired setting

is reached and press the Controller.

167

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CONTROLS

Driving comfort

System limits

The parking assistant calculates the best possi-

ble parking line and takes control of steering

Detection of objects

during the parking procedure.

Very low obstacles or high, protruding objects

System status and instructions on required ac-

such as ledges may not be recognized by the

tions are displayed on the Control Display.

system.

A component of the parking assistant is the

If the vehicle is equipped accordingly, certain

PDC Park Distance Control.

assistance functions also take into account data

from PDC Park Distance Control.

Safety information

Follow the notes in the PDC Park Distance Con-

WARNING

trol chapter.

The system does not relieve from per-

The objects displayed on the Control Display

sonal responsibility to assess the traffic situa-

may be closer than they appear. Therefore, do

tion. Based on the limits of the system, it can-

not estimate the distance from the objects on

not independently react to all traffic situations.

the display.

There is a risk of an accident. Adjust driving

style to traffic conditions. Watch traffic closely

and actively intervene where appropriate.◀

Parking assistant

NOTE

Concept

The parking assistant can steer the vehi-

cle over or onto curbs. There is a risk of damage

to property. Watch traffic closely and actively

intervene where appropriate.◀

The safety information of the PDC Park Dis-

tance Control applies in addition.

Overview

Button in the vehicle

This system assists the driver in parking parallel

to the road.

General information

Parking assistant handling is divided into three

steps:

▷ Switching on and activating.

▷ Parking space search.

▷ Parking.

Park assistance button

Ultrasound sensors measure parking spaces on

both sides of the vehicle.

168

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving comfort

CONTROLS

Ultrasound sensors

▷ When parking in parking spaces on the

driver's side, the corresponding turn signal

must be set.

Switching on and activating

Switching on with the button

Press park assistance button.

The LED lights up.

The current status of the parking space search

The ultrasound sensors for measuring parking

is indicated on the Control Display.

spaces are located on the wheel housing.

Parking assistant is activated automatically.

Functional requirements

Switching on with reverse gear

Shift into reverse.

Ultrasound sensors

The current status of the parking space search

Ensure full functionality:

is indicated on the Control Display.

▷ Do not cover sensors, for instance with

To activate:

"Parking Assistant"

stickers.

▷ Keep the sensors clean and unobstructed.

Indicator on the Control Display

For measuring parking spaces

System activated/deactivated

▷ Maximum speed while driving forward ap-

prox. 22 mph/35 km/h.

Symbol Meaning

▷ Maximum distance to row of parked vehi-

Gray: the system is not available.

cles: 5 ft/1.5 m.

White: the system is available but not

activated.

Suitable parking space

▷ Gaps behind an object that has a min.

The system is activated.

length of 5 ft/1.5 m.

▷ Gap between two objects with a minimum

Parking space search and system status

length of approx. 5 ft/1.5 m.

▷ Min. length of gap between two objects:

your vehicle's length plus approx.

3.3 ft/1.0 m.

▷ Minimum depth: approx. 5 ft/1.5 m.

For parking

▷ Doors and split doors are closed.

▷ The parking brake is released.

169

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CONTROLS

Driving comfort

▷ Symbol P on the vehicle image: the parking

The end of the parking procedure is indi-

assistant is activated and the parking space

cated on the display.

search is active.

4. Adjust the parking position yourself, if

▷ Control Display shows suitable parking

needed.

spaces at the edge of the road next to the

vehicle symbol. When the parking assistant

Interrupting manually

is active, suitable parking spaces are high-

The parking assistant can be interrupted at any

lighted.

time:

▷

The parking procedure is ac-

▷

Press park assistance button.

tive. Steering control has

been taken over by system.

▷ "Parking Assistant"

Interrupting automatically

▷ Parking space search is always active

The system is interrupted automatically in the

whenever the vehicle is moving forward

following situations:

slow and straight, even if the system is de-

▷ If the driver grasps the steering wheel or

activated. When the system is deactivated,

takes over steering.

the displays on the Control Display are

shown in gray.

▷ If a gear is selected that does not match the

instruction on the display.

Parking using the parking assistant

▷ If the vehicle speed exceeds approx.

6 mph/10 km/h.

Parking

▷ Possibly on snow-covered or slippery road

surfaces.

Press the park assistance button or

shift into reverse gear to switch on the

▷ If a maximum number of parking attempts

parking assistant, refer to page 169. Acti-

or the time taken for parking is exceeded.

vate the parking assistant, if needed.

▷ If the PDC Park Distance Control displays

Parking assistant is activated.

clearances that are too small.

Pass the row of parked vehicles at a speed

▷ When switching into other functions of the

of up to approx. 22 mph/35 km/h and at a

radio.

distance of maximum 5 ft/1.5 m.

A Check Control message is displayed.

The status of the parking space search and

possible parking spaces are displayed on

Resuming

the display, refer to page 169.

An interrupted parking procedure can be con-

Follow the instructions on the display.

tinued, if needed.

The best possible parking position will

Reactivate the parking assistant, refer to

come after gear change on the stationary

page 169, and follow the instructions on the

vehicle - wait for the automatic steering

display.

wheel move.

Switching off

The system can be switched off as follows:

170

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving comfort

CONTROLS

▷

Press park assistance button.

▷

When sensors are dirty, iced over, damaged

or out of position.

▷ Switching off the ignition.

▷

If cargo protrudes.

▷

Under certain weather conditions such as

System limits

high relative humidity, wet conditions,

snowfall, extreme heat, or strong wind.

Safety information

▷

With tow bars and trailer couplings of other

WARNING

vehicles.

The system can react not at all, too late,

▷

With thin or wedge-shaped objects.

incorrectly, or without justification due to the

▷

With moving objects.

system limits. There is a risk of accidents or risk

▷

With elevated, protruding objects such as

of damage to property. Follow the information

ledges or cargo.

regarding the system limits and actively inter-

vene, if needed.◀

▷

With objects with corners and sharp edges.

▷

With objects with a fine surface structure

No parking assistance

such as fences.

The parking assistant does not offer assistance

▷

For objects with porous surfaces.

in the following situations:

▷

Low objects already displayed, for instance

▷ In tight curves.

curbs, can move into the blind area of the

sensors before or after a continuous tone

Functional limitations

sounds.

The system may not be fully functional in the

▷

The parking assistant may identify parking

following situations:

spaces that are not suitable for parking.

▷ On bumpy road surfaces such as gravel

roads.

Tire size

The parking position may vary depending on

▷ On slippery ground.

the tire size.

▷ With accumulations of leaves/snow in the

parking space.

Malfunction

▷ With a mounted emergency wheel.

A Check Control message is displayed.

▷ With ditches or edges, for instance an edge

The parking assistant failed. Have the system

of a port.

checked by a dealer’s service center or another

qualified service center or repair shop.

Limits of ultrasonic measurement

Ultrasonic measuring might not function under

the following circumstances:

▷ For small children and animals.

▷ For persons with certain clothing, for in-

stance coats.

▷ With external interference of the ultra-

sound, for instance from passing vehicles or

loud machines.

171

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CONTROLS

Climate control

Vehicle features and op-

Interior air quality

tions

The air quality inside the vehicle is improved by

an emissions-tested interior, a microfilter, and a

This chapter describes all standard, country-

climate-control system for regulating tempera-

specific and optional features offered with the

ture, air flow, and recirculated-air mode.

series. It also describes features that are not

necessarily available in your vehicle, e. g., due

In addition there are other functions which de-

to the selected options or country versions. This

pend on the vehicle's equipment, for instance

also applies to safety-related functions and sys-

microfilter/activated-charcoal filter, automatic

tems. When using these functions and systems,

climate control, and parked-car ventilation.

the applicable laws and regulations must be

observed.

Air conditioner

Air distribution settings

Air conditioning

Air flow

Recirculated-air mode

Temperature

Rear window defroster

Seat heating, right

Windshield defroster

172

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Climate control

CONTROLS

Seat heating, left

Climate control functions in detail

Depending on the weather, the windshield may

fog up briefly when the engine is started.

Switching the system on/off

The air conditioner produces condensation wa-

ter, refer to page 201, that will exit from below

Switching on

the vehicle.

Set any air flow.

Recirculated-air mode

Switching off

Concept

Turn the wheel for air flow all the

way to the left.

You may react to unpleasant odors or pollu-

tants in the immediate environment by tempo-

rarily suspending the supply of outside air. The

system then recirculates the air flow within the

vehicle.

Temperature

Operation

Concept

Press button repeatedly to select an

The system heats or cools, depending on the

operating mode:

set temperature.

▷ LED off: outside air flows in continuously.

Settings

▷ LED on, recirculated-air mode: the supply

of outside air into the vehicle is perma-

Turn the ring to set the desired

nently blocked.

temperature.

To prevent window condensation, recirculated-

air mode switches off automatically after a cer-

tain amount of time, depending on the external

temperature.

Air conditioning

With constant recirculated-air mode, the air

quality in the car's interior deteriorates and the

Concept

fogging of the windows increases.

The air in the car's interior will be cooled and

If the windows fog over, switch off recirculated-

dehumidified and, depending on the tempera-

air mode and increase the air flow, if needed.

ture setting, warmed again.

The car's interior can only be cooled with the

Controlling the air flow manually

engine running.

Concept

Switching on/off

The air flow for climate control can be adjusted

manually.

Press button.

The LED is illuminated with air condi-

tioning switched on.

173

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CONTROLS

Climate control

Operation

▷ Direct the air distribution onto the win-

dows.

Turn the ring to set the desired

air flow.

▷ Increasing the air flow.

The higher the air flow, the more

▷ Increase the temperature.

effective the heating or cooling

▷ Switch on the air conditioning if needed.

will be.

Windshield defroster

The air flow from the air conditioner may be re-

duced automatically to save battery power.

Press button. The LED lights up.

The front window defroster switches

Controlling the air distribution manually

off automatically after a certain period of time.

Concept

Rear window defroster

The air distribution for climate control can be

Press button. The LED lights up.

adjusted manually.

The rear window defroster switches off

Operation

automatically after a certain period of time.

Turn the wheel to select the de-

When GREEN Mode is activated, the heater out-

sired program or the desired in-

put is reduced.

termediate setting.

Microfilter

In external and recirculated-air mode the mi-

▷ Windows.

crofilter filters dust and pollen from the air.

▷ Upper body region.

Have this filter changed during vehicle mainte-

▷ Floor area.

nance, refer to page 243.

▷ Windows, upper body region, and floor

area.

Defrosting windows and removing

condensation

Make the following settings to defrost the win-

dows and remove condensation:

174

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Climate control

CONTROLS

Automatic climate control

Temperature, left

Maximum cooling

Display

10 Air conditioning

Air flow, AUTO intensity

11 Recirculated-air mode

AUTO program

12 Rear window defroster

Air distribution, manual

13 Windshield defroster

Display

14 Defrosting windows and removing conden-

sation

Temperature, right

15 Seat heating, left

Seat heating, right

Climate control functions in detail

Switching off

Turn wheel for air flow to the left

Switching the system on/off

until the control switches off.

Switching on

Set any air flow.

Temperature

Concept

The automatic climate control achieves the set

temperature as quickly as possible, if necessary

175

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CONTROLS

Climate control

by using the maximum cooling or heating

General information

power, and then keeps it constant.

The function is available with external tempera-

tures beyond approx. 32 ℉/0 ℃ and with the

Settings

engine running.

Turn the ring to set the desired

Air flows out of the vents to the upper body re-

temperature.

gion. The vents need to be open for this.

The air flow can be adjusted with the air flow

active.

Do not rapidly switch between different tem-

Switching on/off

perature settings. The automatic climate con-

Press button.

trol will not have sufficient time to adjust the

set temperature.

The LED is illuminated with the system

switched on.

Air conditioning

The system is set to the lowest temperature,

optimum air flow and air circulation mode.

Concept

The air in the car's interior will be cooled and

AUTO program

dehumidified and, depending on the tempera-

ture setting, warmed again.

Concept

The car's interior can only be cooled with the

Air flow, air distribution and temperature are

engine running.

controlled automatically.

Switching on/off

Press button.

The LED is illuminated with air condi-

The LED is illuminated with the AUTO

tioning switched on.

program switched on.

Depending on the weather, the windshield may

Depending on the selected temperature, AUTO

fog up briefly when the engine is started.

intensity and outside influences, the air is di-

The air conditioning is switched on automati-

rected to the windshield, side windows, upper

cally with the AUTO program.

body, and into the floor area.

When using the automatic climate control, con-

The following features are switched on auto-

densation water, refer to page 201, develops

matically with the AUTO program:

and drains underneath the vehicle. This is nor-

▷ The air conditioning, refer to page 176.

mal.

To switch off the program: press the button

again or manually adjust the air distribution.

Maximum cooling

Intensity

Concept

With the AUTO program activated, the auto-

The system is set to the lowest temperature,

matic intensity control can be changed.

maximum air flow and recirculated-air mode.

176

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Climate control

CONTROLS

Turn the ring to set the desired

To prevent window condensation, recirculated-

intensity from soft to intensive.

air mode switches off automatically after a cer-

tain amount of time, depending on the external

temperature.

If windows are fogged over, switch off the recir-

The set intensity is displayed via the position of

culating mode and press the AUTO button.

the illuminated LED segment.

Make sure that air can flow to the windshield.

Automatic recirculated-air control/

Controlling the air flow manually

recirculated-air mode

Concept

The air flow for climate control can be adjusted

The automatic recirculated-air control AUC rec-

manually.

ognizes odors or pollutants in the outside air.

The outside air supply is shut off and the inte-

General information

rior air is recirculated.

To manually adjust air flow switch off AUTO

program first.

General information

If the system is activated, a sensor detects pol-

Operation

lutants in the outside air and controls the shut-

Turn the ring to set the desired

off automatically.

air flow.

If the system is deactivated, outside air contin-

uously flows into the car's interior.

With constant recirculated-air mode, the air

quality in the car's interior deteriorates and the

The manually adjusted air flow is displayed via

fogging of the windows increases.

illuminated LED segments.

You may react to unpleasant odors or pollu-

The air flow of the automatic climate control

tants in the immediate environment by tempo-

may be reduced automatically to save battery

rarily suspending the supply of outside air. The

power.

system then recirculates the air flow within the

vehicle.

Controlling the air distribution manually

Switching on/off

Concept

Press button repeatedly to select an

The air distribution for climate control can be

operating mode:

adjusted manually.

▷ LEDs off: outside air flows in continuously.

Operation

▷ Left LED on, automatic recirculated-air con-

Press button repeatedly to select a

trol: a sensor detects pollutants in the out-

program:

side air and shuts off automatically.

▷ Right LED on, recirculated-air mode: the

▷ Windows, upper body region, and floor

supply of outside air into the vehicle is per-

area.

manently blocked.

▷ Upper body region and floor area.

177

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CONTROLS

Climate control

▷ Floor area.

Microfilter/activated-charcoal filter

▷ Windows and floor area.

In external and recirculated-air mode the mi-

crofilter/activated charcoal filter filters dust,

▷ Windows.

pollen, and gaseous pollutants out of the air.

▷ Windows and upper body region.

Have this filter changed during vehicle mainte-

▷ Upper body region.

nance, refer to page 243.

Defrosting windows and removing

condensation

Ventilation

Concept

Setting

Ice and condensation are quickly removed

from the windshield and the front side win-

The air flow directions can be individually ad-

dows.

justed:

▷ Direct ventilation:

Switching on/off

The air flow is directly pointed onto the per-

Press button.

son. The air flow heats or cools noticeably,

depending on the adjusted temperature.

The LED is illuminated with the system

switched on.

▷ Indirect ventilation:

Ice and condensation are quickly removed

If the vents are fully or partly closed, the air

from the windshield and the front side win-

is directly routed into the car's interior.

dows.

Front ventilation

The air flow can be adjusted with the air flow

active.

If there is window condensation, switch on the

air conditioning too.

Windshield defroster

Press button. The LED lights up.

The front window defroster switches

off automatically after a certain period of time.

▷ Turn knob for continuous opening and clos-

ing of the vents.

Rear window defroster

▷ Swivel the vents to alter the direction of the

Press button. The LED lights up.

vent flow, arrows.

The rear window defroster switches off

automatically after a certain period of time.

When GREEN Mode is activated, the heater out-

put is reduced.

178

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Climate control

CONTROLS

Ventilation in the rear

▷ Make sure that the vehicle's date and time

are set correctly.

▷ Open the vents to allow air to flow out.

Switching on/off directly

Via the Central Information Display (CID):

"My MINI"

2. "Vehicle settings"

3. If necessary, "Climate functions"

▷ Lever for changing the air flow direction,

4. "Activate comfort ventilation now"

arrow 1.

The symbol on the automatic climate con-

▷ Thumbwheel for variable opening and clos-

trol flashes if the system is switched on.

ing of the vents, arrow 2.

Preselecting the activation time

Via the Central Information Display (CID):

Parked-car ventilation

"My MINI"

2. "Vehicle settings"

Concept

3. If necessary, "Climate functions"

The parked-car ventilation ventilates the car's

4. "Comfort ventilation"

interior and lowers its temperature, if needed.

5. Select the desired activation time.

General information

6. Set the desired time.

The parked-car ventilation can be switched on

and off directly or by using two preset activa-

Activating the activation time

tion times. The system remains switched on for

Via the Central Information Display (CID):

30 minutes.

"My MINI"

The parked-car ventilation system is operated

2. "Vehicle settings"

via the Central Information Display (CID).

3. If necessary, "Climate functions"

Functional requirements

4. "For start time at:"

▷ Direct operation: vehicle is in radio-ready

Activate the desired activation time.

state.

The symbol on the automatic climate con-

▷ Direct operation or preset activation time:

trol lights up when the activation time is acti-

does not depend on external temperature.

vated.

▷ Battery is sufficiently charged.

The symbol on the automatic climate con-

If parked-car ventilation is switched on, the

trol flashes when the system has been switched

vehicle battery will be discharged. Thus,

on.

limit the maximum activation time to save

The system will only be switched on within the

the vehicle battery. The system will be

next 24 hours. After that, it needs to be reacti-

available again after the engine is started or

vated.

after a short trip.

179

MINI Clubman (2018 year). Manual - part 10