Content .. 262 263 264 265 ..

Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual - part 264

14. Confirm that the engine starts.
NOTE:

The engine will only start at the second trial.

Program Diesel Cutoff Solenoid

Start Engine! Does The Engine Run?

(1) 2001 (TF) LUV

Electronic System: Immobilizer

YES

15. Program is completed.

Program Diesel Cutoff Solenoid

Programming Completed!

(1) 2001 (TF) LUV

Electronic System: Immobilizer

Confirm

Important

After successful programming, the engine control can only be used for vehicles with immobilizer and transponder.
Faults that occur in connection with the immobilizer control unit are recognized by the engine control unit and as
long as “IMMOBILIZER” is not programmed, are indicated by a flashing of the engine check light.

The DDS-1 unit can be reprogrammed and takes around 10 minutes for Tech 2 to complete.

Loss of car pass

If the car pass is lost, the data can be requested from your proper organization name. This request will only be
processed if accompanied by the enclosed form and proof of ownership.

Once the data is received, it can be entered in a blank car pass and given to the customer. The unused car pass
should be destroyed.

•

Instructions on Filling Out the form "Data request, car pass"

To be provided by the dealership

The data requested under items 1-10 must be provided completely, including the authorized

dealership number, the vehicle identification, number(VIN) and engine type/number (Engine type/No.)

Mark missing data / desired data with a cross:

19. Security code (for diagnosis and programming with Tech 2)
20. Mechanical Key Number

Complete the form by entering the data and signature/authorized dealership stamp and send it along with
proof of ownership (Vehicle lD or invoice) to address provided in the form. The requested data will be sent
by Fax to the dealership that made the request after your organization has confirmed that the info is
corrected.

Important Instructions:

Only data corresponding to the delivery status of the vehicle can be issued. Car pass data requests will only
be processed if the first column is filled out completely, signed and sent to your organization along with
proof of ownership.

Information via telephone is only possible in exceptional circumstances via your service organization.

As for the delivery of new vehicles, the customer must be informed about all features of the car pass that are
relevant to vehicle security, for example, that the car pass should be kept in a safe place (not in the vehicle) and
should be presented when an authorized your organization name workshop is visited. The exact phrasing can
be found in the relevant Owner's Manual.

Data Request
Car Pass

Your organization name

To be filled out by authorized dealership:

Comment, plant security

1. Dealership name ---------------------------------------------------

2. Name of contact partner------------------------------------------

3. Dealership number-------------------------------------------------

4. Address---------------------------------------------------------------

--------------------------------------------------------------------------

5. Tel:------------------------------- Fax--------------------------------

6. Name of registered keeper
7. Reason for request (please mark with cross)

- Loss by customer
- Loss by dealership
- New delivery Car Pass
- Theft

8. Vehicle type----------------------------------------------------------

9. VIN---------------------------------------------------------------------

10. Engine type / No ----------------------------------------------------

Requested data (please mark with cross)
11. Security Code :
12. Key No. :
13. Radio code (if lost, please supply radio unit number)
14. CD-changer code (if lost, please supply CD-changer unit

number)

---------------------------------------------------------
---------------------------------------------------------
---------------------------------------------------------
---------------------------------------------------------
---------------------------------------------------------
---------------------------------------------------------
---------------------------------------------------------

---------------------------------------------------------
---------------------------------------------------------
---------------------------------------------------------

---------------------------------------------------------

Important Instructions:
Only data corresponding to the delivery status of the vehicle Ex works can be Issued.
Car pass requests will only be processed if they are filled out completely, signed and sent to
your organization along with proof of ownership (enclosure).
Information via telephone is only possible in exceptional circumstances via your service organization.

Comments form Plant Security

No signature

Data / proof of ownership missing,
Please complete

Data / proof of ownership incomplete,
please resend
Illegible due to poor fax communication,
Please supply

Data, signature / stamp

Data, signature

(Dealership)

(Plant Security)

Enclosure : Proof of ownership

Diagnostic procedure

System guidance

•

Engine does not run when any Diagnostic Trouble Code (DTC) is flagged, starting from 01MY TFR/S.

•

Once the cause of DTC is repaired or gone, engine can be operated normally, and present DTC becomes
history code.

•

History code is canceled by no repeat failure on 25 consequence ignition key On afterward.

•

History code cannot be canceled by battery connector disconnected, starting from 01MY

Diagnostic Trouble Code (DTC) list

Code

(BCD)

Item

Detecting Condition

B0011

TRANSPONDER
KEY PROBLEM

Transponder code unsuccessfully read 5 consecutive time.
(Not completely read in 500ms transponder code)

B0012

WRONG
TRANSPONDER
KEY

Transponder code read from the ignition key does not match the
transponder code stored in the control unit.

B0013

IMMOBILIZER NOT
PROGRAMMED

Immobilizer program no executed.

B0014

NO TRANSPONDER
KEY PROGRAMMED

Processing to save the transponder key in the control unit not
executed.

B0015

VEHICLE SPEED
SIGNAL Lo (Gas)
FREQUENCY
SIGNAL Lo (Diesel)

Lo level (2.5v or less) input during the Hi level was being output
in the immobilizer signal. (Gas)

Lo level (2.5v or less) input during the Hi level was being output to the
communication line. (Diesel)

B0016

VEHICLE SPEED
SIGNAL Hi (Gas)
FREQUENCY
SIGNAL Hi (Diesel)

Hi level (more than 2.5v) input during the Lo level was being output in
the immobilizer signal. (Gas)
Hi level (more than 2.5v) input during the Lo level was being output to
the communication line. (Diesel)

B0017

NO ENGINE
REQUEST
RECEIVED

No request signal received from the engine control unit in a second
after the ignition key has been placed at ON.
(Gas engine only)

B0023

ANTENNA COIL
OPEN

Antenna coil not connected.

B0024

WRONG
TRANSPONDER
RESPONSE

Transponder response signal with the challenge is wrong.

B0025

WRONG ENGINE
REQUEST

The challenge signal from the engine control unit is invalid.
(Gas engine only)

B0055

EEPROM ERROR

Write and read cannot be correctly made to and from the EEPROM in
the control unit.

Content .. 262 263 264 265 ..