|
|
(9) Hold the binding strip with the left hand and push the Tool forward and slightly upward. Then fit (10) Tighten the strip by closing the tool handles (Fig. 8). Then rotate the tool (handles) downward (11) If the strap is not tight enough, engage the tool a second or even a third time, always about 13 (12) Fig. 10 shows WHAT NOT TO DO, NEVER fold the strap back or bring the tool down while (13) Fig. 11 shows how to pull the tool down while releasing the pressure on the tool handle. Fig. 7 Push Tool Forward & Fit into Buckle Eye Fig. 8 Tighten Strap Fig. 9 Tighten Strap (if Required) Fig. 10 What Not to Do Fig. 11 Correct Tightening Procedure 2 - 46 SUSPENSION AND DRIVESHAFTS Ä |