Volvo S60 Recharge Plug-in Hybrid (2021 year). Manual in english - page 8

DISPLAYS AND VOICE CONTROL

* Option/accessory.

141

Examples of what might be shown on the display.

Speed

Cruise control

Navigation

Road signs

A number of symbols may be projected tem-
porarily onto the head-up display including:

If the warning symbol appears, read
the warning message in the instru-
ment panel.

If the information symbol appears,
read the warning message in the
instrument panel.

The snowflake symbol will illuminate
if there is a risk of slippery condi-
tions.

NOTE

People with certain types of vision prob-
lems may experience headaches or eye
strain when using the head-up display.

City Safety in head-up-display

If a collision warning is given, the information
in the head-up display will be replaced by a
City Safety warning signal. This graphic will
illuminate even if the head-up display is turned
off.

The warning symbol for City Safety will flash to get

the driver's attention if there is a risk of collision.

Related information

•

Activating and deactivating the head-up
display

*

 (p. 142)

•

Cleaning the head-up display

*

 and instru-

ment panel (p. 616)

•

Replacing a windshield with head-up dis-
play

*

 (p. 583)

DISPLAYS AND VOICE CONTROL

* Option/accessory.

142

Activating and deactivating the

head-up display

*

The head-up display can be activated and
deactivated when the vehicle has been
started.

Press the 

Head-up Display

button in the center display's
Function view. An indicator
light in the button will illumi-
nate when the function is
activated.

Related information

•

Head-up display settings

*

 (p. 142)

•

Head-up display

*

 (p. 140)

Head-up display settings

*

Adjusting settings for the head-up display.

Settings can be adjusted when the vehicle is
started and a projected image is displayed on
the windshield.

Selecting display options

Select the functions to be shown in the head-
up display.

1. Tap 

Settings

 in the center display's Top

view.

2. Tap 

My Car

Displays

Head-Up

Display Options

.

3. Select one or more functions:

•

Show Navigation

•

Show Road Sign Information

•

Show Driver Support

•

Show Phone

This setting is stored as a personal setting in
the driver profile.

Adjusting brightness and height
position

1. Press the 

Head-up Display Adjustments

button in the center display's Function
view.

2. Adjust the brightness of the projected

image and the height position in the driv-
er's field of vision using the right-side
steering wheel lever.

Decreasing brightness

Increasing brightness

DISPLAYS AND VOICE CONTROL

}}

* Option/accessory.

143

Raising position

Lowering position

Confirm

The brightness of the graphic is automatically
adapted to the light conditions in its back-
ground. Brightness is also affected by adjust-
ments to the brightness of the other displays
in the vehicle.

The height position can be stored in the front
power seat's

*

 memory function using the key-

pad in the driver's door.

Calibrating the horizontal position

If the windshield or display unit has been
replaced, the head-up display's horizontal
position may need to be calibrated. Calibration
means that the projected image is rotated
clockwise or counterclockwise.

1. Tap 

Settings

 in the center display's Top

view.

2. Select 

My Car

Displays

Head-Up

Display Options

Head-Up Display

Calibration

.

3. Calibrate the horizontal position of the

image using the right-side steering wheel
keypad.

Rotate counterclockwise

Rotate clockwise

Confirm

Related information

•

Head-up display

*

 (p. 140)

•

Activating and deactivating the head-up
display

*

 (p. 142)

•

Driver profiles (p. 134)

•

Storing positions for seats, mirrors and
head-up display

*

 (p. 182)

Voice Control

Voice control

14

 allows you to control func-

tions in the vehicle, e.g. the climate control
system, radio or a Bluetooth-connected
phone, using spoken commands. In vehicles
equipped with Sensus Navigation

*

, the navi-

gation system can also be controlled using
voice commands.

What is voice control?

Voice control is a driver support function that
can simplify the use of various commands in
your vehicle. It works in general like a regular
application in which you input information in a
set order in order to perform a task, but
instead of typing on a keypad, you use voice
commands. It can therefore be a good idea to
familiarize yourself with how, and in what
order, a voice command should be spoken to
get the desired result.

You can control certain infotainment and cli-
mate control functions through the voice con-
trol system by using voice commands. The
system can respond verbally and by displaying
information in the instrument panel.

14

Certain markets only.

||

DISPLAYS AND VOICE CONTROL

144

WARNING

The driver is always responsible for ensur-

ing that the vehicle is operated in a safe

manner and that all applicable traffic regu-

lations are followed.

Voice control microphone

System updates

The voice control system is continuously
improved. It is recommended to always have
the latest version installed.

Download updates at volvocars.com/support.

NOTE

Not all system languages support voice
control. If a language supports voice con-
trol, it is marked with a 

 symbol in the

list of available system languages. Read
more about where the information is found
in the section on voice control settings.

Related information

•

Use voice recognition (p. 144)

•

Voice control for cellular phones (p. 146)

•

Voice control for radio and media (p. 147)

•

Climate control system voice commands
(p. 198)

•

Voice control settings (p. 148)

Use voice recognition

Starting voice control

15

Voice commands are given
through a "dialog" with the
voice control system. Press
the button for voice control

 on the right-side steering

wheel keypad to activate the
system and initiate a voice

command dialog. When you press the button,
a beep will sound and the voice control sym-
bol will appear in the instrument panel.

This shows that the system has begun listen-
ing and you can now begin speaking com-
mands. As soon as you start speaking, the
system will be trained to recognize and under-
stand your voice. This takes several seconds
and is done automatically, which means that
you don't need to manually initiate any voice
training.

15

Certain markets only.

DISPLAYS AND VOICE CONTROL

}}

* Option/accessory.

145

These may include:

•

Wait until after the tone, and then speak in
your normal voice at a normal speed.

•

Do not speak while the system is respond-
ing (the system is unable to process com-
mands during this time).

•

Avoid background noises in the passenger
compartment by keeping doors, windows
and the panoramic roof

*

 closed.

NOTE

Not all system languages support voice
control. If a language supports voice con-
trol, it is marked with a 

 symbol in the

list of available system languages. Read
more about where the information is found
in the section on voice control settings.

Generally, the system will listen for a basic
command that is then followed by more
detailed commands specifying what you want
the system to do.

To change the audio volume of the system,
turn the volume knob while the voice is speak-
ing. It is possible to use other buttons while
voice commands are being given. However,
because other audio is silenced during dialog
with the system, it is not possible to perform

any functions connected to audio using the
buttons.

Canceling voice control

To cancel voice control, do one of the follow-
ing:

•

Briefly press 

 and say "

Cancel

".

•

Press and hold the steering wheel key-
pad's voice command button 

 until

two audible signals are given. This cancels
voice control even when the system is
speaking.

Voice control will also be canceled if you do
not respond during a dialog. The system will
first ask three times for a response and if the
response is still not given, voice control will be
automatically canceled.

To speed up communication and skip prompts
from the system, press the voice control but-
ton 

 on the steering wheel keypad. This

will interrupt the system's response and you
can say the next command.

Voice command examples

1. Tap 

.

2. Say "

Call [First name]

 

[Last name]

[number category]

", e.g. "

Call Robyn

Smith

 

cellular

".

> The system will call the selected con-

tact from the phone book. If the contact
has several phone numbers (e.g. home,
cell, work), the right category must also
be given.

Commands/phrases

The following commands can usually be used
in any situation:

•

"

Repeat

" - repeats the most recent voice

command in the current dialog.

•

"

Cancel

" - cancels the dialog.

16

•

"

Help

" - initiates a help dialog. The sys-

tem responds with commands that can be
used in the current situation, an instruc-
tion or an example.

Commands for specific functions, such as
phone and audio, are described in the sections
related to that function.

16

Note that this only cancels the dialog when the system is not speaking. To do this, press and hold 

 until you hear two beeps.

||

DISPLAYS AND VOICE CONTROL

146

Numbers

Number commands can be given in different
ways depending on the function to be con-
trolled:

•

Phone numbers and zip codes

 should be

given by stating each number individually,
e.g. "zero, three, one, two, two, four, four,
three" (03122443).

•

Addresses

 can be given by stating each

number individually or in a group, e.g.
"two, two" or "twenty-two" (22). For Eng-
lish and Dutch language settings, groups
of numbers can also be said in sequence,
e.g. "twenty-two, twenty-two" (22 22).
For English, double or triple digits can also
be used, e.g. "double zero" (00). Numbers
in the range 0-2300 can be used.

•

Frequencies

 can be given as "ninety-eight

point eight" (98.8), "one hundred four
point two" or "hundred and four point
two" (104.2).

Speech rate and repeat mode

The speed at which the system speaks can be
adjusted.

With repeat mode on, the system will repeat
what you have said.

To change the speech rate or activate/deacti-
vate repeat mode:

1. Tap 

Settings

 in the Top view.

2. Tap 

System

Voice Control

 and select

settings.

•

Repeat Voice Command

•

Speech Rate

Related information

•

Voice Control (p. 143)

•

Voice control for cellular phones (p. 146)

•

Voice control for radio and media (p. 147)

•

Climate control system voice commands
(p. 198)

•

Voice control settings (p. 148)

Voice control for cellular phones

17

Call a contact in the phone book, have a text
message read aloud or dictate short mes-
sages using voice commands to a Bluetooth-
connected phone.

To access a contact in the phone book, the
voice command must contain the contact
information entered in the phone book. If a
contact, e.g. 

Robyn Smith

, has several phone

numbers listed in the phone book, a number
category such as 

home

 or 

cellular

 can also be

specified, i.e. "

Call Robyn

 

Smith

 

cellular

".

Tap 

 and say one of the following com-

mands:

•

"

Call [contact]

" - call the selected con-

tact from the phone book.

•

"

Call

 

[phone number]

" - call a phone

number.

•

"

Recent calls

" - display the list of recent

calls.

•

"

Read message

" - read a text message

aloud. If there are several messages,
select the message to read aloud.

•

"

Message to [contact]

" – the user is

prompted to dictate a short message. The
message will then be read aloud and the
user can choose to send or re-dictate the
message. The vehicle must be connected
to the Internet to access this function.

DISPLAYS AND VOICE CONTROL

* Option/accessory.

147

NOTE

Not all system languages support voice
control. If a language supports voice con-
trol, it is marked with a 

 symbol in the

list of available system languages. Read
more about where the information is found
in the section on voice control settings.

Related information

•

Voice Control (p. 143)

•

Use voice recognition (p. 144)

•

Voice control for radio and media (p. 147)

•

Climate control system voice commands
(p. 198)

•

Voice control settings (p. 148)

•

Internet-connected vehicle

*

 (p. 512)

Voice control for radio and media

18

Voice commands for the radio and media
players are shown below.

Tap 

 and say one of the following com-

mands:

•

"

Media

" - initiates a dialog for media and

radio and displays examples of com-
mands.

•

"

Play

 

[artist]

" - plays music by the

selected artist.

•

"

Play

 

[song title]

" - plays the selected

song.

•

"

Play

 

[song title]

 

from

 

[album]

" - plays

the selected song from the selected
album.

•

"

Play

 

[radio station]

" - starts the

selected radio station.

•

"

Tune to [frequency]

" - tunes to the

selected radio frequency in the currently
active waveband. If no radio source is
active, the FM band will be started as
default.

•

"

Tune to [frequency]

 

[waveband]

" -

tunes to the selected radio frequency on
the selected waveband.

•

"

Radio

" - starts FM radio.

•

"

Radio FM

" - starts FM radio.

•

"

SiriusXM

" - starts SiriusXM radio

*

•

"

USB

" - starts playback from USB.

•

"

iPod

" - starts playback from iPod.

•

"

Bluetooth

" - starts playback from a

Bluetooth-connected media source.

•

"

Similar music

" - plays music from a

USB-connected device with music similar
to that currently playing.

NOTE

Not all system languages support voice
control. If a language supports voice con-
trol, it is marked with a 

 symbol in the

list of available system languages. Read
more about where the information is found
in the section on voice control settings.

Related information

•

Voice Control (p. 143)

•

Use voice recognition (p. 144)

•

Voice control for cellular phones (p. 146)

•

Climate control system voice commands
(p. 198)

•

Voice control settings (p. 148)

17

Certain markets only.

18

Certain markets only.

DISPLAYS AND VOICE CONTROL

148

Voice control settings

19

Settings for the voice control system are
made here.

Settings

System

Voice Control

Settings can be personalized in the following
areas:

•

Repeat Voice Command

•

Gender

•

Speech Rate

Sound settings

Select sound settings under:

Settings

Sound

System Volumes

Voice Control

Language settings

The voice control system is not available for all
languages. The languages available for voice
commands are indicated by the 

 icon in

the list of languages.

Changing the language here will also change
the language in the menus, messages and
help texts.

Settings

System

System Languages

and Units

System Language

Related information

•

Voice Control (p. 143)

•

Use voice recognition (p. 144)

•

Voice control for cellular phones (p. 146)

•

Climate control system voice commands
(p. 198)

•

Voice control for radio and media (p. 147)

•

Sound settings (p. 466)

•

Changing system language (p. 130)

19

Certain markets only.

LIGHTING

* Option/accessory.

150

Lighting control and panel

The lighting panel and controls can be used
to adjust both exterior and interior lighting.
The lighting ring on the left-side steering
wheel lever can be used to activate and
adjust the exterior lighting. The brightness of
the interior lighting can be adjusted using the
thumb wheel on the dashboard.

Exterior lighting

Lighting ring position.

When the vehicle's ignition is in mode 

II

, the

lighting ring positions have the following func-
tions:

Position Meaning

US: Daytime running lights and
parking lights are off.

Canada: Daytime running lights
and parking lights are on.

High beam flash can be used.

Parking lights when the vehicle
is parked.

US: Daytime running lights are
off.

Canada: Daytime running lights
are on.

High beam flash can be used.

Low beams and parking lights.

High beams can be activated.

High beam flash can be used.

Position Meaning

Daytime running lights and
parking lights in daylight condi-
tions.

A

Low beams and parking lights in
weak daylight or dark conditions
or when the front fog lights

*

and/or rear fog light are acti-
vated.

Active high beam can be acti-
vated.

High beams can be activated
when low beams are on.

High beam flash can be used.

Active high beams on/off.

A

US models only: Daytime running lights and parking lights

can be deactivated in the center display.

NOTE

Volvo recommends use of Daytime
Running Lights in the US. Its use is man-
datory in Canada.

Volvo recommends using position 

 when

the vehicle is in motion.

LIGHTING

* Option/accessory.

151

WARNING

The vehicle lighting system cannot in all sit-

uations determine when the daylight is too

weak or not strong enough, e.g. when

there is fog or rain.
The driver is always responsible for driving

the vehicle with lighting that is safe for the

traffic conditions and as specified by appli-

cable traffic regulations.

Thumbwheel in instrument panel

Thumb wheel (to the left) for adjusting interior bright-

ness.

Related information

•

Adjusting light functions via the center
display (p. 151)

•

Interior Lighting (p. 160)

•

Parking lights (p. 152)

•

Using turn signals (p. 156)

•

Using high beam (p. 154)

•

Low beams (p. 153)

•

Front fog lights/corner illumination

*

(p. 157)

•

Rear fog light (p. 158)

•

Active Bending Lights

*

 (p. 156)

•

Brake lights (p. 159)

•

Emergency brake lights (p. 159)

•

Hazard warning flashers (p. 159)

Adjusting light functions via the

center display

A number of light functions can be adjusted
and activated via the center display. These
include active high beams, home safe lighting
and approach lighting.

1. Tap 

Settings

 in the center display's Top

view.

2. Tap 

My Car

Lights and Lighting

.

3. Select 

Exterior Lights

 or 

Interior

Lighting

 and then select the function that

you would like to adjust.

Related information

•

Lighting control and panel (p. 150)

•

Active high beam (p. 155)

•

Using home safe lighting (p. 160)

•

Welcome Light (p. 160)

•

Using turn signals (p. 156)

•

Changing settings in the center display's
Top view (p. 130)

•

Function view in the center display
(p. 120)

LIGHTING

* Option/accessory.

152

Parking lights

The parking lights can be used to help other
road users see the vehicle if it is stopped or
parked. Use the lighting ring on the steering
wheel lever to turn on the parking lights.

Lighting ring in the parking light position.

Turn the lighting ring to the 

 position to

turn on the parking lights (the license plate
lighting will also illuminate).

Canadian models:

 If the ignition is in the 

II

position, the daytime running lights will illumi-
nate instead of the front parking lights. With
the lighting ring in this position, the parking
lights will remain on regardless of what posi-
tion the ignition is in.

US models:

 When 

 mode is selected,

the daytime running lights can be deactivated
in the center display. The parking lights will
also be deactivated. In weak daylight or dark

conditions, the parking lights and low beams
will be illuminated.

In dark conditions, the rear parking lights also
illuminate when the trunk lid is opened to alert
following traffic. This happens regardless of
what position the lighting ring or ignition is in.

Related information

•

Lighting control and panel (p. 150)

•

Ignition modes (p. 411)

Daytime running lights

The vehicle has sensors that detect ambient
lighting conditions. With the lighting ring in
the 

 position, the daytime running lights

will always be activated when the ignition is
in mode 

II

. In weak daylight or dark condi-

tions, the headlights automatically switch to
low beams.

Lighting ring in 

AUTO

 position.

With the steering wheel lever's lighting ring in
the 

 position, the daytime running lights

(DRL

1

) will illuminate when the vehicle is

driven in daylight conditions. The headlights
will switch automatically from daytime run-
ning lights to low beams in weak daylight or
dark conditions. The headlights will also
switch to low beams if the front fog lights

*

and/or rear fog light are activated.

LIGHTING

}}

153

US models

: When 

 mode is selected,

the daytime running lights can be deactivated
in the center display. The parking lights will
also be deactivated. In weak daylight or dark
conditions, the parking lights and low beams
will be illuminated.

US models

: With the lighting ring in the 

or 

 position, the daytime running lights

will be 

off

.

Canadian models

: With the lighting ring in

the 

 or 

 position, the daytime run-

ning lights will be on.

NOTE

Volvo recommends use of Daytime
Running Lights in the US. Its use is man-
datory in Canada.

WARNING

The system is an energy saving aid – it

cannot in all situations determine when the

daylight is too weak or not strong enough,

e.g. when there is fog or rain.
The driver is always responsible for driving

the vehicle with lighting that is safe for the

traffic conditions and as specified by appli-

cable traffic regulations.

Related information

•

Lighting control and panel (p. 150)

•

Ignition modes (p. 411)

•

Low beams (p. 153)

Low beams

When driving with the lighting ring in the

 position, low beam will be automati-

cally activated in weak daylight or dark condi-
tions, when the ignition is in the 

II

 position.

Lighting ring in 

AUTO

 position.

With the lighting ring in the 

 position, the

low beams will also be automatically activated
if the rear fog light is activated.

With the lighting ring in the 

 position,

low beams will always be on when the ignition
is in the 

II

 position.

1

Daytime Running Lights

||

LIGHTING

154

Tunnel detection

The vehicle will detect if it enters a tunnel and
shift from daytime running lights to low
beams.

Note that the left-hand steering wheel lever
must be in 

 position for tunnel detection

to work.

Related information

•

Lighting control and panel (p. 150)

•

Ignition modes (p. 411)

•

Daytime running lights (p. 152)

Using high beam

High beam is operated via the left-hand
steering wheel lever. High beam is the vehi-
cle's strongest lighting and should be used
when driving in dark conditions, provided it
does not blind other road users, to improve
visibility.

Steering wheel lever with lighting ring.

High beam flash

Move the steering wheel lever slightly
backward to the high beam flash mode.
The high beams will illuminate until the
lever is released.

High beams

The high beams can be activated when
the lighting ring is in mode 

2

 or

. Activate high beams by moving the

steering wheel lever forward.
Deactivate by moving the steering wheel
lever backward.

When the high beams are activated, the 
symbol will be illuminated in the instrument
panel.

Related information

•

Lighting control and panel (p. 150)

•

Active high beam (p. 155)

2

When the low beams are on.

LIGHTING

155

Active high beam

Active high beams is a function that uses
camera sensors in the upper edge of the
windshield to detect the headlights of
approaching vehicles or the taillights of the
vehicle directly ahead. When either of these
is detected, the vehicle's headlights will auto-
matically switch from high beams to low
beams.

Active high beams is indicated by the 

 symbol.

This function can be used in dark conditions
when the vehicle's speed is approx. 20 km/h
(approx. 12 mph) or higher. The function can
also detect street lighting. When the camera
sensor no longer detects an approaching vehi-
cle or a vehicle ahead, the headlights will
return to high beams after a second or two.

Activating active high beams

Active high beams can be activated and deac-
tivated by turning the lighting ring on the left-
side steering wheel lever to position 

.

The lighting ring will then return to 

.

When active high beams are activated, a white

 symbol will be displayed in the instru-

ment panel. When high beams are on, the
symbol will be blue.

If active high beams are deactivated when the
high beams are on, the headlights will auto-
matically switch to low beams.

Limitations for active high beams

The camera sensor on which the function is
based has limitations.

If this symbol and the message

Active High Beam

 

Temporarily

unavailable

 is displayed in the

instrument panel, switching

between high and low beams must be done
manually. The 

 symbol will go out when

the message is displayed.

The same applies if this symbol
along with the message

Windscreen sensor

 

Sensor

blocked, see Owner's manual

 is

displayed.

Active high beams may be temporarily unavail-
able in certain situations, e.g. heavy fog or

rain. When active high beams become availa-
ble again, or the windshield sensors are no
longer blocked, the message will disappear
and the 

 symbol will be displayed.

WARNING

Automatic high beam is an aid in using the

best possible light based on prevailing con-

ditions.
The driver is always responsible for man-

ually switching between high and low

beam when traffic situations or weather

conditions require this.

Related information

•

Lighting control and panel (p. 150)

•

Using high beam (p. 154)

•

Camera/radar sensor limitations (p. 377)

LIGHTING

* Option/accessory.

156

Using turn signals

The vehicle's turn signals are controlled using
the left-side steering wheel lever. The turn
signals flash three times or continuously,
depending on how far up or down the lever is
moved.

Turn signals.

Triple flash indicator

Move the steering wheel lever up or down
to the first position and release. The turn
signals will flash three times. If the func-
tion is deactivated via the center display,
the signals will flash once.

NOTE

•

This automatic flashing sequence can
be interrupted by immediately moving
the lever in the opposite direction.

•

If the turn signal indicator flashes more
quickly than normal, refer to the mes-
sage in the instrument panel.

Continuous flashing sequence

Move the lever up or down as far as possi-
ble.

The lever will stop in its end position and can
be moved back manually or automatically by
moving the steering wheel.

Related information

•

Hazard warning flashers (p. 159)

•

Adjusting light functions via the center
display (p. 151)

Active Bending Lights

*

Active Bending Lights (ABL) are designed to
help provide extra illumination in curves and
intersections. Depending on equipment level,
vehicles with LED

3

 headlights

*

 may be equip-

ped with Active Bending Lights.

Headlight pattern with function deactivated (left) and

activated (right).

Active Bending Lights follow the movement of
the steering wheel to help provide extra illumi-
nation in curves and intersections, helping to
improve visibility for the driver.

The function is automatically activated when
the engine is started. If a fault is detected in
the system, the 

 symbol will illuminate in

the instrument panel and a message will be
displayed.

3

LED (Light Emitting Diode)

LIGHTING

}}

* Option/accessory.

157

The function is only active in weak daylight or
dark conditions and only when the vehicle is
moving and the low beams are on.

Deactivating/activating the function

The function is activated as the default factory
setting and can be activated and deactivated
in the center display's Function view:

Tap the 

Active Bending

Lights

 button.

Related information

•

Adjusting light functions via the center
display (p. 151)

•

Front fog lights/corner illumination

*

(p. 157)

Front fog lights/corner

illumination

*

The fog lights can be activated manually
when driving in fog and are activated auto-
matically when backing up to help augment
the backup light.

If the vehicle is equipped with corner illumi-
nation

*

, the fog lights are activated automati-

cally in weak daylight or dark conditions to
illuminate the area diagonally in front of the
vehicle.

Front fog lights button.

The front fog lights can be turned on when the
ignition is in mode 

II

 and the lighting ring is in

position 

, 

 or 

.

Tap the button to activate or deactivate the
function. The 

 symbol in the instrument

panel comes on when the front fog lights are
on.

The front fog lights turn off automatically
when the ignition is switched off or when the
lighting ring is in position 

.

NOTE

Regulations concerning fog light use vary
from country to country.

Cornering illumination

*

The front fog lamps can include the cornering
lights function, which temporarily illuminates
the area diagonally in front of the car in the
direction the steering wheel is turned on a
sharp bend, or in the direction shown by the
direction indicators.

The function is activated in weak daylight or
dark conditions when the lighting ring is in

 or 

 mode and the vehicle speed is

less than about 30 km/h (about 20 mph).

Both cornering illumination are also illumi-
nated as a complement to the taillights when
reversing.

The function is activated as the default factory
setting and can be activated and deactivated
using the center display.

Related information

•

Lighting control and panel (p. 150)

•

Ignition modes (p. 411)

•

Rear fog light (p. 158)