Toyota Corolla Hatchback (2022 year). Manual in english - page 4

62

1-3. Emergency assistance

Subscribers have the following 
Safety Connect services avail-
able:



Automatic Collision Notifica-
tion

*

Helps drivers receive necessary 
response from emergency service 
providers. (



P.63)

*

: U.S. Patent No. 7,508,298 B2



Stolen Vehicle Location

Helps drivers in the event of vehicle 
theft. (



P.63)



Emergency Assistance Button 
(“SOS”)

Connects drivers to response-cen-
ter support. (



P.64)



Enhanced Roadside Assis-
tance

Provides drivers various on-road 
assistance. (



P.64)

After you have signed the 
Telematics Subscription Service 
Agreement and are enrolled, 
you can begin receiving ser-
vices. 
A variety of subscription terms 
are available for purchase. Con-
tact your Toyota dealer, call the 
following appropriate Customer 
Experience Center or push the 
“SOS” button in your vehicle for 
further subscription details.
• The United States

1-800-331-4331

• Canada

1-888-869-6828

• Puerto Rico

1-877-855-8377

■

Safety Connect Services Infor-

mation

●

Phone calls using the vehicle’s 
Bluetooth

®

 technology will not be 

possible when Safety Connect is 

active and in use.

●

Safety Connect is available begin-

ning Fall 2009 on select Toyota 

models (in the contiguous United 

States only). Contact with the 

Safety Connect response center 

is dependent upon the telematics 

device being in operative condi-

tion, cellular connection availabil-

ity, and GPS satellite signal 

reception, which can limit the abil-

ity to reach the response center or 

receive emergency service sup-

port. Enrollment and Telematics 

Subscription Service Agreement 

are required. A variety of subscrip-

tion terms are available; charges 

vary by subscription term selected 

and location.

●

Automatic Collision Notification, 

Emergency Assistance and Stolen 

Vehicle Location are available in 

the United States, including 

Hawaii and Alaska, Puerto Rico 

and Canada, and Enhanced 

Roadside Assistance are avail-

able in the United States, Puerto 

Rico and Canada.

●

Automatic Collision Notification, 

Emergency Assistance, Stolen 

Vehicle and Enhanced Road 

Assistance are not available in the 

U.S. Virgin Islands.

For vehicles first sold in the U.S. 

Virgin Islands, no Safety Connect 

services will function in or outside 

the U.S. Virgin Islands.

●

Safety Connect services are not 

Services

Subscription

63

1-3. Emergency assistance

1

For safety and secu

rity

subject to section 255 of the Tele-

communications Act and the 

device is not TTY compatible.

■

Languages

The Safety Connect response cen-

ter will offer support in multiple lan-

guages.

The Safety Connect system will 

offer voice prompts in English, 

Spanish, and French. Please indi-

cate your language of choice when 

enrolling.

■

When contacting the response 

center

You may be unable to contact the 

response center if the network is 

busy.

When the engine switch is 
turned to ON, the red indicator 
light comes on for 2 seconds 
then turns off. Afterward, the 
green indicator light comes on, 
indicating that the service is 
active.
The following indicator light pat-
terns indicate specific system 
usage conditions:



Green indicator light on = 
Active service



Green indicator light flashing 
= Safety Connect call in pro-
cess



Red indicator light (except at 
vehicle start-up) = System 
malfunction (contact your Toy-
ota dealer)



No indicator light (off) = 
Safety Connect service not 

active

■

Automatic Collision Notifi-
cation

In case of either airbag deploy-
ment or severe rear-end colli-
sion, the system is designed to 
automatically call the response 
center. The responding agent 
receives the vehicle’s location 
and attempts to speak with the 
vehicle occupants to assess the 
level of emergency. If the occu-
pants are unable to communi-
cate, the agent automatically 
treats the call as an emergency, 
contacts the nearest emer-
gency services provider to 
describe the situation, and 
requests that assistance be sent 
to the location.

■

Stolen Vehicle Location

If your vehicle is stolen, Safety 
Connect can work with local 
authorities to assist them in 
locating and recovering the 
vehicle. After filing a police 
report, call the Customer Experi-
ence Center at 1-800-331-4331 
in the Unites States, 
1-877-855-8377 in Puerto Rico 
or 1- 888-869-6828 in Canada, 
and follow the prompts for 
Safety Connect to initiate this 
service. 
In addition to assisting law 
enforcement with recovery of a 

Safety Connect LED light 
Indicators

Safety Connect services

64

1-3. Emergency assistance

stolen vehicle, Safety-Con-
nect-equipped vehicle location 
data may, under certain circum-
stances, be shared with third 
parties to locate your vehicle. 
Further information is available 
at Toyota.com in the United 
States, Toyotapr.com in Puerto 
Rico and Toyota.ca in Canada.

■

Emergency Assistance But-
ton (“SOS”)

In the event of an emergency on 
the road, push the “SOS” button 
to reach the Safety Connect 
response center. The answer-
ing agent will determine your 
vehicle’s location, assess the 
emergency, and dispatch the 
necessary assistance required.

If you accidentally press the “SOS” 
button, tell the response-center 
agent that you are not experiencing 
an emergency.

■

Enhanced Roadside Assis-
tance

Enhanced Roadside Assistance 
adds GPS data to the already 
included warranty-based Toyota 
roadside service.
Subscribers can press the 
“SOS” button to reach a Safety 
Connect response-center agent, 
who can help with a wide range 
of needs, such as: towing, flat 
tire, fuel delivery, etc. For a 
description of the Enhanced 
Roadside Assistance services 
and their limitations, please see 
the Safety Connect Terms and 

Conditions, which are available 
at Toyota.com in the United 
States, Toyotapr.com in Puerto 
Rico and Toyota.ca in Canada.

Important! Read this informa-
tion before using Safety Con-
nect.

■

Exposure to radio fre-
quency signals

The Safety Connect system 
installed in your vehicle is a 
low-power radio transmitter and 
receiver. It receives and also 
sends out radio frequency (RF) 
signals.
In August 1996, the Federal 
Communications Commission 
(FCC) adopted RF exposure 
guidelines with safety levels for 
mobile wireless phones. Those 
guidelines are consistent with 
the safety standards previously 
set by the following U.S. and 
international standards bodies.



ANSI (American National 
Standards Institute) C95.1 
[1992]



NCRP (National Council on 
Radiation Protection and 
Measurement) Report 86 
[1986]



ICNIRP (International Com-
mission on Non-Ionizing Radi-
ation Protection) [1996]

Safety information for 
Safety Connect

65

1-3. Emergency assistance

1

For safety and secu

rity

Those standards were based on 
comprehensive and periodic 
evaluations of the relevant sci-
entific literature. Over 120 scien-
tists, engineers, and physicians 
from universities, and govern-
ment health agencies and 
industries reviewed the avail-
able body of research to 
develop the ANSI Standard 
(C95.1).
The design of Safety Connect 
complies with the FCC guide-
lines in addition to those stan-
dards.

66

1-4. Theft deterrent system

1-4.Theft deterrent system

The indicator light flashes after 
the engine switch has been 
turned off to indicate that the 
system is operating.
The indicator light stops flashing 
after the engine switch has been 
turned to ACC or ON to indicate 

that the system has been can-
celed.

■

System maintenance

The vehicle has a mainte-

nance-free type engine immobilizer 

system.

■

Conditions that may cause the 

system to malfunction

●

If the grip portion of the key is in 

contact with a metallic object

●

If the key is in close proximity to or 

touching a key to the security sys-

tem (key with a built-in transpon-

der chip) of another vehicle

Engine immobilizer 

system

The vehicle’s keys have 
built-in transponder chips 
that prevent the engine from 
starting if a key has not 
been previously registered 
in the vehicle’s on-board 
computer.

Never leave the keys inside 
the vehicle when you leave 
the vehicle.

This system is designed to 
help prevent vehicle theft 
but does not guarantee 
absolute security against all 
vehicle thefts.

Operating the system

NOTICE

■

To ensure the system oper-

ates correctly

Do not modify or remove the sys-

tem. If modified or removed, the 

proper operation of the system 

cannot be guaranteed.

67

1-4. Theft deterrent system

1

For safety and secu

rity

*

: If equipped

■

Items to check before lock-
ing the vehicle

To prevent unexpected trigger-
ing of the alarm and vehicle 
theft, make sure of the following:



Nobody is in the vehicle.



The windows are closed 
before the alarm is set.



No valuables or other per-
sonal items are left in the 
vehicle.

■

Setting

Close the doors, back door and 
hood, and lock all the doors. 
The system will set automati-
cally after 30 seconds.

The indicator light changes from 
being on to flashing when the sys-
tem is set.

■

Deactivating or stopping

Do one of the following to deac-
tivate or stop the alarms:



Unlock the doors.



Turn the engine switch to 
ACC or ON, or start the 
engine. (The alarm will be 
deactivated or stopped after a 
few seconds.)

■

System maintenance

The vehicle has a mainte-

nance-free type alarm system.

■

Triggering of the alarm

The alarm may be triggered in the 

following situations: 

(Stopping the alarm deactivates the 

alarm system.)

●

A person inside the vehicle opens 

a door, back door or hood, or 

unlocks the vehicle.

●

A person inside the vehicle 

Alarm

*

The alarm uses light and 
sound to give an alert when 
an intrusion is detected. 
The alarm is triggered in the 
following situations when 
the alarm is set:



A locked door or back door 
is unlocked or opened in 
any way other than using 
the entry function, wireless 
remote control or mechani-
cal key. (The doors will lock 
again automatically.)



The hood is opened.

Setting/deactivating/stop-
ping the alarm system

68

1-4. Theft deterrent system

unlocks the door using the inside 

lock buttons.

●

The battery is recharged or 

replaced when the vehicle is 

locked. (



P.507)

■

Alarm-operated door lock

In the following cases, depending 

on the situation, the door may auto-

matically lock to prevent improper 

entry into the vehicle:

●

When a person remaining in the 

vehicle unlocks the door and the 

alarm is activated.

●

While the alarm is activated, a 

person remaining in the vehicle 

unlocks the door.

●

When recharging or replacing the 

battery

NOTICE

■

To ensure the system oper-

ates correctly

Do not modify or remove the sys-

tem. If modified or removed, the 

proper operation of the system 

cannot be guaranteed.

Theft prevention 

labels (U.S.A.)

These labels are attached to 
the vehicle to reduce vehi-
cle theft by facilitating the 
tracing and recovery of 
parts from stolen vehicles. 
Do not remove under the 
penalty of law.

69

2

2

Vehicle

 statu

s information an

d in
dicator

s

Vehicle status information

and indicators

.

2-1. Instrument cluster

Warning lights and indica-

tors ...............................

70

Gauges and meters 

(4.2-inch display)..........

74

Gauges and meters (7-inch 

display).........................

78

Multi-information display

.....................................

82

Head-up display .............

89

Fuel consumption informa-

tion ...............................

93

70

2-1. Instrument cluster

2-1.Instrument cluster

For the purpose of explanation, the following illustrations display all 
warning lights and indicators illuminated.



4.2-inch display



7-inch display (when analog speedometer is displayed)

Warning lights and indicators

The warning lights and indicators on the instrument cluster, 
center panel and outside rear view mirrors inform the driver of 
the status of the vehicle’s various systems.

Warning lights and indicators displayed on the instru-
ment cluster

71

2-1. Instrument cluster

2

Vehicle

 statu

s information an

d in
dicator

s



7-inch display (when digital speedometer is displayed)

Warning lights inform the driver 
of malfunctions in the indicated 
vehicle’s systems.

Warning lights

(U.S.A.)

Brake system warning 
light

*1

 (



P.470)

(Red)

(Canada)

Brake system warning 
light

*1

 (



P.470)

(Yellow)

Brake system warning 
light

*1

 (



P.470)

High coolant temperature 
warning light

*2

 (



P.470)

Charging system warning 
light

*1

 (



P.471)

Low engine oil pressure 
warning light

*2

 (



P.471)

(U.S.A.)

Malfunction indicator 
lamp

*1

 (



P.471)

(Canada)

Malfunction indicator 
lamp

*1

 (



P.471)

SRS warning light

*1

 

(



P.471)

(U.S.A.)

ABS warning light

*1

 

(



P.472)

(Canada)

ABS warning light

*1

 

(



P.472)

Brake Override System 
warning light/Drive-Start 
Control warning light

*2

 

(



P.472)

(Red)

Electric power steering 
system warning light

*1

 

(



P.473)

(Yellow)

Electric power steering 
system warning light

*1

 

(



P.473)

Low fuel level warning 
light (



P.473)

Driver’s and front passen-
ger’s seat belt reminder 
light (



P.473)

72

2-1. Instrument cluster

*1

:These lights come on when the 

engine switch is turned to ON to 
indicate that a system check is 
being performed. They will turn 
off after the engine is started, or 
after a few seconds. There may 
be a malfunction in a system if 
the lights do not come on, or turn 
off. Have the vehicle inspected 
by your Toyota dealer.

*2

:This light illuminates on the 

multi-information display.

The indicators inform the driver 
of the operating state of the 
vehicle’s various systems.

Rear passengers’ 
seat belt reminder 
lights (



P.474)

Tire pressure warning 
light

*1

 (



P.474)

(Orange)

LTA indicator (if equipped) 
(



P.474)

LDA indicator (if equipped) 
(



P.474)

(Flashes)

RCTA OFF indicator

*1

 (if 

equipped) (



P.475)

(Flashes 

or illumi-

nates)

PCS warning light

*1

 

(



P.475)

Slip indicator

*1

 (



P.475)

(Flashes)

(U.S.A.)

Parking brake indicator 
(



P.476)

(Flashes)
(Canada)

Parking brake indicator 
(



P.476)

(Flashes)

Brake hold operated indi-
cator

*1

 (



P.476)

(Orange)

iMT indicator

*1

 (if 

equipped) (



P.476)

WARNING

■

If a safety system warning 

light does not come on

Should a safety system light such 

as the ABS and SRS warning light 

not come on when you start the 

engine, this could mean that 

these systems are not available to 

help protect you in an accident, 

which could result in death or seri-

ous injury. Have the vehicle 

inspected by your Toyota dealer 

immediately if this occurs.

Indicators

Turn signal indicator 
(



P.151)

(U.S.A.)

Headlight indicator 
(



P.158)

(Canada)

Tail light indicator 
(



P.158)

Headlight high beam indi-
cator (



P.159)

Automatic High Beam 
indicator (



P.160)

Front fog light indicator (if 
equipped) (



P.163)

PCS warning light

*1, 2

 

(



P.176)

Cruise control indicator 
(



P.200, 211)

Dynamic radar cruise con-
trol indicator (



P.200, 

211)

73

2-1. Instrument cluster

2

Vehicle

 statu

s information an

d in
dicator

s

*1

:These lights come on when the 

engine switch is turned to ON to 
indicate that a system check is 
being performed. They will turn 
off after the engine is started, or 
after a few seconds. There may 
be a malfunction in a system if 
the lights do not come on, or turn 
off. Have the vehicle inspected 
by your Toyota dealer.

*2

:This light comes on when the 

system is turned off.

*3

:Depending on the operating con-

dition, the color and illuminat-
ing/flashing state of the light 
change.

*4

:This light illuminates on the out-

side rear view mirrors.

*5

:This light illuminates on the 

multi-information display.

*6

:When the outside temperature is 

approximately 37°F (3°C) or 
lower, this indicator will flash for 
approximately 10 seconds, then 
stay on.

*7

:This light illuminates on the cen-

ter panel.

Cruise control “SET” indi-
cator (



P.200, 211)

*3

LTA indicator (if equipped) 
(



P.187)

LDA indicator (if 
equipped) (



P.196)

BSM outside rear view 
mirror indicators

*1, 4

 (if 

equipped) (



P.225)

BSM indicator (if 
equipped) (



P.225)

RCTA OFF indicator

*1, 2

 

(if equipped) (



P.231)

(Flashes)

Slip indicator

*1

 (



P.245)

VSC OFF indicator

*1, 2

 

(



P.245)

Smart key system indica-
tor

*5

 (



P.140)

(U.S.A.)

Parking brake indicator 
(



P.152)

(Canada)

Parking brake indicator 
(



P.152)

Brake hold standby indi-
cator

*1

 (



P.155)

Brake hold operated indi-
cator

*1

 (



P.155)

Auto EPB OFF indicator

*1, 

2

 (if equipped) (



P.152)

Eco Driving Indicator 
Light

*1

(if equipped) 

(



P.85)

Low outside temperature 
indicator

*6

 (



P.74, 78)

Security indicator (



P.66, 

67)

“AIR BAG ON/OFF” 
indicator

*1, 7

 (



P.40)

Sport mode indicator (if 
equipped) (



P.243)

(Green)

iMT indicator (if equipped) 
(



P.150)

74

2-1. Instrument cluster

■

Locations of gauges and meters

The units of measure may differ depending on the intended destination of 
the vehicle.

Tachometer

Displays the engine speed in revolutions per minute

Speedometer
Outside temperature

Displays the outside temperature within the range of -40°F (-40°C) to 122°F 
(50°C)

Clock (



P.76)

Multi-information display

Presents the driver with a variety of vehicle data (



P.82)

Displays warning messages if a malfunction occurs (



P.480)

Odometer and trip meter display (



P.75)

Shift position indicator (



P.145)

Display change button (



P.75)

Fuel gauge

Displays the quantity of fuel remaining in the tank

Engine coolant temperature gauge

Displays the engine coolant temperature

Gauges and meters (4.2-inch display)

Meter display

75

2-1. Instrument cluster

2

Vehicle

 s

ta

tu

s information an

d in
dicat

or

s

■

Outside temperature display

●

In the following situations, the cor-

rect outside temperature may not 

be displayed, or the display may 

take longer than normal to 

change:

• When stopped, or driving at low 

speeds (less than 16 mph [25 

km/h])

• When the outside temperature 

has changed suddenly (at the 

entrance/exit of a garage, tunnel, 

etc.)

●

When “--” or “E” is displayed, the 

system may be malfunctioning. 

Take your vehicle to your Toyota 

dealer.

■

Liquid crystal display



P.83

■

Changing the display

Press the display change button 
until the desired item is dis-
played.

■

Display items



Odometer

Displays the total distance the vehi-
cle has been driven.



Trip meter A/Trip meter B

Displays the distance the vehicle 
has been driven since the meter 
was last reset. Trip meters A and B 
can be used to record and display 

WARNING

■

The information display at 

low temperatures

Allow the interior of the vehicle to 

warm up before using the liquid 

crystal information display. At 

extremely low temperatures, the 

information display monitor may 

respond slowly, and display 

changes may be delayed.

For example, there is a lag 

between the driver’s shifting and 

the new gear number appearing 

on the display. This lag could 

cause the driver to downshift 

again, causing rapid and exces-

sive engine braking and possibly 

an accident resulting in death or 

injury.

NOTICE

■

To prevent damage to the 

engine and its components

●

Do not let the indicator needle 

of the tachometer enter the red 

zone, which indicates the maxi-

mum engine speed.

●

The engine may be overheating 

if the engine coolant tempera-

ture gauge is in the red zone 

(H). In this case, immediately 

stop the vehicle in a safe place, 

and check the engine after it 

has cooled completely. 

(



P.509)

Odometer and trip meter 
display

76

2-1. Instrument cluster

different distances independently.
To reset, display the desired trip 
meter and press and hold the dis-
play change button.

The brightness of the instrument 
panel lights can be adjusted.

1

Brighter

2

Darker

■

Instrument panel light bright-

ness adjustment

The brightness of the instrument 

panel lights can be adjusted sepa-

rately for when the tail lights are on 

and off.

■

Clock adjustment

The clocks on the following can 
be adjusted on the audio system 
screen.



Multi-information display



Audio system screen

■

Setting the clock to be 
adjusted automatically by 
GPS

1

Press the “MENU” button.

2

Select “Setup” on the “Menu” 
screen.

3

Select “General” on the 
“Setup” screen.

4

Select “Clock”.

5

Select “Auto Adjust by GPS” 
to set to on.

■

Adjusting the clock manu-
ally

1

Press the “MENU” button.

2

Select “Setup” on the “Menu” 
screen.

3

Select “General” on the 
“Setup” screen.

4

Select “Clock”.

5

Select “Auto Adjust by GPS” 
to set to off.

6

Adjust the displayed time.



Hour: Select “-” or “+” of 
“Hours” to adjust the hour.



Minute: Select “-” or “+” of 
“Minutes” to adjust the min-
ute.



“:00”: Select to set the clock to 
the beginning of the nearest 
hour.

e.g.
1:00 to 1:29 



 1:00

1:30 to 1:59 



 2:00

■

Setting the time zone

1

Press the “MENU” button.

Changing the instrument 
panel light brightness

Adjusting the clock

77

2-1. Instrument cluster

2

Vehicle

 statu

s information an

d in
dicator

s

2

Select “Setup” on the “Menu” 
screen.

3

Select “General” on the 
“Setup” screen.

4

Select “Clock”.

5

Select “Time Zone”.

Select the desired time zone.

Premium Audio only:
If “Auto” is selected, the time zone 
is selected automatically by current 
vehicle position.

■

Setting daylight saving time

1

Press the “MENU” button.

2

Select “Setup” on the “Menu” 
screen.

3

Select “General” on the 
“Setup” screen.

4

Select “Clock”.

5

Select “Daylight Saving 
Time” then on/off/auto

*

.

*

: Premium Audio only

■

Changing the clock 
between 12-hour/24-hour 
format

1

Press the “MENU” button.

2

Select “Setup” on the “Menu” 
screen.

3

Select “General” on the 
“Setup” screen.

4

Select “Clock”.

5

Select “24-Hour Time For-
mat” and then on/off.

When set to off, the clock is dis-
played in 12 hour time format.

■

Clock settings screen

If “Clock : 00” is displayed when 

 

is selected on the multi-information 

display, the system may be malfunc-

tioning. Have the vehicle inspected 

by your Toyota dealer.