|
|
INSTALLATION OF ENGINE 1. ASSEMBLE ENGINE AND TRANSAXLE (See MT section) 2. INSTALL ENGINE AND TRANSAXLE ASSEMBLY IN VEHICLE the transaxle downward, lower the engine and clear NOTICE: Be careful not to hit the PS gear housing. (c) Keep the engine level, and align RH and LH mount- ings with the body bracket. (f) Attach the LH mounting insulator to the mounting bracket and body with the through bolt and four Torque: Bolt 63 N–m (650 kgf–cm, 47 ft–lbf) Through bolt 87 N–m (890 kgf–cm, 64 ft–lbf) (g) Tighten the through bolt and two nuts of the RH mounting insulator. Torque: Nut 52 N–m (530 kgf–cm, 38 ft–lbf) Through bolt 87 N–m (890 kgf–cm, 64 ft–lbf) (h) Remove the engine chain hoist from the engine. (e) Install the LH mounting bracket to the transaxle case with the three bolts. Torque: 52 N–m (530 kgf–cm, 38 ft–lbf) (d) Attach the RH mounting insulator to the mount- ing bracket and body, and temporarily install – ENGINE MECHANICAL Cylinder Block (3S–GTE) EM–258 |