|
|
26. REMOVE WATER BY–PASS PIPE (a) Disconnect the following hoses: (1) Water by–pass hose from cylinder block (b) Disconnect the following hoses: (1) Upper radiator hose (c) Remove the two bolts, water outlet and gasket. 24. REMOVE OIL PRESSURE SWITCH (See steps 4 to 6 on pages LU–24 and 25) 27. REMOVE INTAKE MANIFOLD STAYS Remove the two bolts and manifold stay. Remove the (b) Remove the two bolts, two nuts, water by–pass pipe, gasket and O–ring. – ENGINE MECHANICAL Cylinder Head (3S–GTE) EM–122 |