Toyota Sequoia (2005). Manual - part 15

B13807

A: Propeller Shaft Spiders
B: Propeller Shaft Sliding Yokes

A

B

A

A

MA0568

MA–10

–

MAINTENANCE

CHASSIS

57

(b)

Recoat the drive shaft thrust bush with grease (See page

SA–34

).

11.

4WD:
LUBRICATE PROPELLER SHAFT AND TIGHTEN
BOLTS

(a)

Lubricate the propeller shaft, referring to the lubrication
chart. Before pumping in grease, wipe off any mud and
dust on the grease fitting.
Grease grade:
   Propeller shaft (Except Double–cardan joint)
   Lithium base chassis grease NLGI No.2

(b)

Tighten the bolts for propeller shaft.
(2WD: See page 

PR–5

)

(4WD: See page 

PR–9

)

12.

ROTATE TIRE (See page 

SA–3

)

13.

TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY

(a)

Tighten the following parts:

Seat mounting bolts

Torque: 

37 N·m (375 kgf·cm, 27 ft·lbf)

B02100

–

MAINTENANCE

CHASSIS

MA–11

58

Leaf spring U–bolt mounting nuts

Torque: 133 N·m (1,350 kgf·cm, 98 ft·lbf )

(b)

Under Severe Conditions:
In addition to the above maintenance items, check for
loose or missing bolts and nuts on the following.

Steering system

Drive train

Suspension system

Fuel tank mounts

Engine mounts, etc.

14.

FINAL INSPECTION

(a)

Check operation of body parts:

Hood:

Auxiliary catch operates properly

Hood locks securely when closed

Doors:

Door locks operate properly

Doors close properly

Seats:

Seat adjusts easily and locks securely in any
positions

Seat backs lock securely at any angle

Fold–down seat backs lock securely

(b)

Road test:

Engine and chassis parts do not have abnormal
noises.

Vehicle does not wander or pull to one side.

Brakes work properly and do not drag.

(c)

Be sure to deliver a clean vehicle and especially check:

Steering wheel

Shift lever knob

All switch knobs

Door handles

Seats

PP1D4–02

–

PREPARATION

MAINTENANCE

PP–1

59

MAINTENANCE

EQUIPMENT

Mirror

Brake hose

PP1D5–02

PP–2

–

PREPARATION

MAINTENANCE

60

LUBRICANT

Item

Capacity

Classification

Brake  fluid

–

SAE J1703 or FMVSS No.116 DOT3