Toyota Highlander (2018 year). Manual - part 98

404

5-9. Bluetooth

®

 phone

■

Release Tones

●

A continuous tone signal is a character string that consists of numbers and
the characters p or w. (e.g.056133w0123p#1

∗)

●

When the “p” pause tone is used, the tone data up until the next pause tone
will be automatically sent after 2 seconds have elapsed. When the “w”
pause tone is used, the tone data up until the next pause tone will be auto-
matically sent after a user operation is performed.

●

Release tones can be used when automated operation of a phone based
service such as an answering machine or bank phone service is desired. A
phone number with continuous tone signals can be registered in the contact
list.

●

Tone data after a “w” pause tone can be operated on voice command during
a call.

405

5-9. Bluetooth

®

 phone

5

Audi

o system

Select “Handset Mode” to on from a hands-free call to a cellular
phone call. 
Select “Handset Mode” to off from a cellular phone call to a hands-free
call.

Select “Transmit Volume”.

Select the desired level for the transmit volume.

Select “OK”.

Press the on-hook switch on the steering wheel or select 

.

When a call is interrupted by a third party while talking, an incoming
call message will be displayed.

To talk with the other party:

• Press the off-hook switch on

the steering wheel.

• Select .

To refuse the call:

• Press the on-hook switch on

the steering wheel.

• Select .

Every time you press the off-hook switch on the steering wheel or
select 

 during call waiting, you will be switched to the other party.

■

Transferring calls

●

If you transfer from the cellular phone to hands-free, the hands-free screen
will be displayed, and you can operate the system using the screen.

●

Transfer method and operation may vary according to the cellular phone
used.

●

For operation of the cellular phone in use, see the phone's manual.

■

Call waiting operation
Call waiting operation may differ depending on your phone company and cel-
lular phone.

To transfer a call

Transmit volume setting

To hang up

Call waiting

1
2
3

406

5-9. Bluetooth

®

 phone

Press  

.

Select .

When an e-mail/SMS/MMS is received, the incoming message screen
pops up with sound and is ready to be operated on the screen.

Select to check the message.

Select to refuse the message.

Select to call the message
sender.

Bluetooth

®

 phone message function

Received messages can be forwarded from the connected
Bluetooth

®

 phone, enabling checking and replying using Entune

Audio.

Depending on the type of Bluetooth

®

 phone connected, received

messages may not be transferred to the message inbox.

If the phone does not support the message function, this func-
tion cannot be used.

Displaying message inbox screen

Receiving a message

1

2

1
2
3

407

5-9. Bluetooth

®

 phone

5

Audi

o system

■

Receiving a message

●

Depending on the cellular phone used for receiving messages, or its regis-
tration status with Entune Audio, some information may not be displayed.

●

The pop up screen is separately available for incoming e-mail and SMS/
MMS messages under the following conditions:

E-mail:

• “Incoming E-mail Display” is set to “Full Screen”. (

→P. 419)

• “E-mail Notification Popup” is set to on. (

→P. 419)

SMS/MMS:

• “Incoming SMS/MMS Display” is set to “Full screen”. (

→P. 419)

• “SMS/MMS Notification Popup” is set to on. (

→P. 419)