Toyota Camry (2018 year). Manual - part 20

90

2. Instrument cluster

Trip (after start)

Average fuel economy

*

Displays the average fuel con-
sumption since engine start.

Average vehicle speed

Displays the average vehicle
speed since engine start.

Elapsed time

Displays the time elapsed since
engine start.

*

: Use the displayed fuel consumption as a reference only.

■

Total (after reset)

Current fuel consumption

Displays the instantaneous cur-
rent fuel consumption.

Average fuel economy

*

1, 2

Displays the average fuel con-
sumption since the display was
reset.

Average vehicle speed/
Elapsed time

*

1

Displays the average vehicle speed since reset or elapsed time since
reset, as selected in 

. (

→P. 92)

*

1

: Pressing and holding 

 will reset the average fuel consumption

and average vehicle speed/elapsed time.

*

2

: Use the displayed fuel consumption as a reference only.

Drive information (

)

1

2

3

1

2

3

91

2. Instrument cluster

2

Instrum

e

nt clus

ter

Tank (after refuel)

Driving range

*

1, 2

Displays the driving range with
remaining fuel.

Average fuel economy

*

1, 3

Displays the average fuel con-
sumption since the vehicle was
refueled.

*

1

: When only a small amount of fuel is added to the tank, the display may

not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.

*

2

: This distance is computed based on your average fuel consumption. As

a result, the actual distance that can be driven may differ from that dis-
played.

*

3

: Use the displayed fuel consumption as a reference only.

■

Eco Driving Indicator
→P. 97

■

Speedometer
Displays the vehicle speed.

■

Tire pressure (vehicles with a tire inflation pressure display
function)
→P. 445

■

Blank (No items)
Displays no drive information contents.

1

2

92

2. Instrument cluster

Changing settings

Use the meter control switches on the steering wheel to change
settings.

Press 

 or 

 to select 

.

Operate the switches to select a desired item.
Change the setting by referring to the message displayed on the
screen.

◆

Setting items

■

 LDA (Lane Departure Alert with steering control) 

(if equipped) (

→P. 253)

The following LDA system settings can be changed:

Settings display (

)

1
2
3

Item

Settings

Details

Steering assist

On

Select to enable/disable steering
wheel assistance.

Off

Alert sensitivity

High

Select to set the warning sensi-
tivity.

Normal

Sway warning

On

Select to enable/disable the vehi-
cle sway warning.

Off

Sway sensitivity

High

Select to set the vehicle sway
warning sensitivity.

Medium

Low

93

2. Instrument cluster

2

Instrum

e

nt clus

ter

 PCS (Pre-Collision System) (if equipped) (

→P. 242)

The following pre-collision system settings can be changed:

■

 BSM (Blind Spot Monitor) function (if equipped) (

→P. 300)

■

RCTA (Rear Cross Traffic Alert) function (if equipped) 
(

→P. 300)

Item

Settings

Details

PCS

On

Select to enable/disable the pre-
collision system.

Off

Warning sensitivity

Select to change the warning
timing.

Item

Settings

Details

BSM

On

Select to enable/disable the
Blind Spot Monitor function.

Off

Item

Settings

Details

RCTA

On

Select to enable/disable the Rear
Cross Traffic Alert function.

Off