Subaru Legacy (2005 year). Manual - part 708
FS-3
FRONT SUSPENSION
General Description
2. WAGON MODEL
NOTE:
• Front and rear toe-ins and front camber can be
adjusted. If the toe-in or camber tolerance exceeds
specifications, adjust them.
• Other items indicated in the specification table
cannot be adjusted. If other items exceed specifica-
tions, check the suspension parts and connections
for deformation, and replace with new ones as re-
quired.
Model
2.0 i
2.5 i
2.0 GT
3.0 R
3.0 R spec.
B
OUTBACK
2.5 i,
OUTBACK
3.0 R
Front
Wheel arch height
(Tolerance:
+12 mm
−24 mm
(
+0.47 in
−0.94 in
))
mm (in)
381 (15.0)
376 (14.8)
372 (14.6)
429 (16.9)
Camber (Tolerance:
±0°45′Differ-
ences between RH and LH 45
′ or
less)
−0°15′
−0°20′
−0°25′
−0°30′
Caster (Referential Value)
5
°45′
6
°05′
5
°05′
Steering angle (Toler-
ance:
±1.5°)
Inner
wheel
37.3
°
37.2
°
37.1
°
37.8
°
Outer
wheel
33.0
°
32.9
°
32.8
°
33.5
°
Toe-in
mm (in)
0
±3 (0±0.12) Toe angle (sum of both wheels): 0°±0°15′
Kingpin angle (Referential Value)
13
°45′
13
°50′
12
°25′
Diameter of stabilizer
mm (in)
20 (0.79)
21 (0.84)
21 (0.83)
Rear
Wheel arch height
(Tolerance:
+12 mm
−24 mm
(
+0.47 in
−0.94 in
))
mm (in)
375 (14.8)
365 (14.4)
430 (16.9)
Camber (Tolerance:
±0°45′Differ-
ences between RH and LH 45
′ or
less)
−0°30′
−0°40′
0
°00′
Toe-in
mm (in)
0
±3 (0±0.12) Toe angle (sum of both wheels): 0°±0°15′
Thrust angle (Tolerance:
±0°30′)
0
°
Diameter of stabilizer
mm (in)
19.1 (0.75)
17.3 (0.68)
(1) Front
A
− B = Positive: Toe-in, Negative: Toe-out
α = Each toe angle
FS-00001
B
A
(1)