|
|
2.7 ENG_UD28949_4 Fonction Stop and Start (X91 - B91 - K91 - D91 - Renault) ENG_NU_936-5_BK91_Renault_2 StoP aND StaRt function (2/3) Special cases – While the system is operating, and the engine is stopped (traffic jam, traffic lights, etc.), if the driver gets out of their seat or unfastens their seat belt and opens the driver’s door, the ignition will be switched off and, depending on the vehicle, the electronic parking brake will be ac- tivated automatically. To restart and reactivate the Stop and Start system, press the start button (please see “Starting, stopping the engine”). – In the event of the engine stalling, if the system is operational, press down the clutch pedal as far as it will go to restart. Deactivate the Stop and Start function for any opera- tion performed in the engine compartment. Conditions preventing the standby of the engine Certain conditions prevent the system from using the engine standby function, including when: too high (less than around 0 °C or higher than around 30 °C); – the battery is not sufficiently charged; interior temperature and the auto- matic climate control instruction is too high; – the “Clear View” function is activated (please see “Automatic Climate Control” in Section 3); – the engine coolant temperature is too low; – automatic particle filter cleaning is underway; or – ... To fill up with fuel, the engine must be stopped (and not on standby): always stop the engine by pressing the engine stop button (please see “Starting, stopping the engine)”. |