|
|
|
335 4008_en_Chap10d_Mitsu4_ed01-2016 ERROR MESSAGES If an error message appears on the screen, refer to the table below to find out what it means and the solution to be applied in order to rectify it. MESSAGE DESCRIPTION SOLUTION CD CHeCK DISC Disc not inserted correctly. Insert the disc with the printed face upwards. DISC eRROR Disc dirty, scratched or distorted. Clean or replace the disc. INteRNAL the player has malfunctioned for some reason. Check that there is no problem with the disc and insert another HeAt eRROR the temperature inside the unit is too high. Remove the disc and wait until the temperature of the unit returns USB FILe eRROR The files selected cannot be read. Select files that can be read: MP3/WMA/AAC. uSB BuS PWR external power supply fault. Switch the system off and on again. If the problem persists, LSI eRROR Communication error between the audio system and the external uNSuPPORteD The files selected cannot be read. Select files that can be read: MP3/WMA/AAC. uNSuPPORteD An unsupported uSB device has been connected. use a suitable uSB cable. |