Peugeot 1007 Dag (2005.5). Instruction

50 - Audio equipment and telematics

01-10-2005

Audio equipment and telematics

01-10-2005

RADIO

Notes on radio reception

Car radio/telephone receivers are

subject to phenomena which do not

affect domestic radio sets. Both MW/

LW and FM are subject to various

forms of interference. This is not a

relection on the quality of the equip-

ment, but is due to the nature of the

signals and the way in which they are

transmitted.

On MW/LW interference may be

noticed when passing under high

voltage power lines or bridges, or in

tunnels.

On FM, interference may be the result

of the increasing distance from the

transmitter, delection of the signals

by obstacles (mountains, hills, build-

ings, etc.) or of being in an area which

is not covered by a transmitter.

Selecting the radio

Press

"SOURCE" several times.

Automatic station search

Briely press button

M or N to search

for the station immediately above or

below.

The search stops at the irst station

found.

If the

TA trafic programme is select-

ed, only the most powerful stations

broadcasting this type of programme

are selected.

Selecting a waveband

Briely press button

''BAND/AST'' to

select the FM1, FM2 , FMast and AM

wavebands.

Search sensitivity

It is possible to carry out automatic

searches at two levels of sensitivity:

- To tune in to the most powerful

transmitters, select the local search

mode

"LO" (default option).

- To tune in to the weakest or most

distant transmitters, select the sen-

sitive search mode

"DX".

The station search is carried out irst

"LO" (local) sensitivity, then in

"DX" (distant) sensitivity.

To make a direct search in

"DX" (dis-

tant) sensitivity, press button

M or N

twice in succession.

52 - Audio equipment and telematics

01-10-2005

Audio equipment and telematics

01-10-2005

Automatic storing of FM stations

in the memory (autostore)

Recalling stations stored in the

memory

For each waveband, briely press the

buttons

"1" to "6" to recall the cor-

responding stored station.

In the case of an RDS station, the

frequency appears for a few seconds

before its name.

Recalling an RDS station may result

in a search for the frequency which

corresponds to the region through

which you are travelling.

Press the

''BAND/AST'' button for

more than two seconds.

Your audio/telephone automatically

stores the 6 stations with the strong-

est signal in FM. These stations are

stored in the FMast waveband.

If it is not possible to ind 6 stations,

the remaining memories are empty.

Manual station search

Briely press button

H or I

to increase or decrease the

frequency displayed.

By continuing to press

the button in the direction

selected, you will obtain

continuous scrolling of the

frequency.

Scrolling stops when you re-

lease the button.

Manual station storing

Select the station required.

Press one of the buttons

"1" to "6"

for more than two seconds.

A window appears on the screen, the

station is stored when it is displayed

on the memory number that you

have allocated to it.

52 - Audio equipment and telematics

01-10-2005

Audio equipment and telematics

01-10-2005

RDS SYSTEM

Using the RDS (Radio Data

System) function on FM

Most FM radio stations use the RDS

system.

This system allows you to continue

listening to the same station, whatever

frequency it is using for the region you

are going through.

This screen indicates

the name of the sta-

tion selected. The

audio/telephone con-

tinuously searches for the transmitter

which transmits the same programme

with the best reception. This search

may cause slight interference with the

transmission.

The function can be switched on or

off via the "RDS" button or the

"AU-

DIO FUNCTIONS" main menu.

The screen will show:

"RDS" if the function is active and

available for the station selected.

"RDS" crossed out or "RDS"

greyed out on the screen* if the

function is active but is not avail-

able on the station.

If the station to which you are listen-

ing does not have several frequen-

cies in the region through which you

are travelling, you can switch off the

automatic frequency following.

Trafic information programme

Press the

''TA/PTY''

button to switch the

function on or off.

The

multi-function

screen will show:

TA if the function is selected,

TA crossed out or greyed out*

if the function is selected but not

available.

Any trafic information lash will be

given priority, whatever source you

are listening to (radio, CD or CD

changer).

If you wish to interrupt the broadcast-

ing of a message, press the

''TA/

PTY'' button.

Notes: the volume of the trafic

information is independent of the

volume of normal audio/telephone

listening.

You can adjust it by using the volume

button. The setting will be stored and

will be used when the next messages

are broadcast.

You must be on the FM waveband.

During station search or automatic

storing phases, if the

"TA" function

is selected, transmitters which are

compatible with the broadcasting of

these messages will be tuned to or

stored irst.

The station being listened to must

indicate via the RDS system that it

broadcasts trafic information.

Stations which are organised in a

network (EON) have regional trans-

mitters which broadcast their own

programmes: you can listen to one

of these stations and switch to the

network station which broadcasts the

trafic information messages.

RDS station following

Regional following mode (REG)

When they are part of a network,

certain stations broadcast regional

programmes in the various areas

they serve. With regional following

mode you can keep listening to the

same programme.

You can choose to follow:

• Either a regional station only.

• Or the entire network, with the pos-

sibility of listening to a different

programme.

The function can be switched on or

off via the

"AUDIO FUNCTIONS"

main menu or by pressing the

"RDS"

button for more than 2 seconds.

The multi-function screen will show:

REG if the function is active,

REG crossed out or greyed out*

if the function is active but not avail-

able.

* According to screen

54 - Audio equipment and telematics

01-10-2005

Audio equipment and telematics

01-10-2005

PTY function

This allows you to listen to stations

broadcasting a speciic type of pro-

gramme, selected from the list of

available types below:

NEWS

SCIENCE

AFFAIRS

VARIED

INFO

POP M

SPORT

ROCK M

EDUCATE

EASY M

FICTION

LIGHT M

CULTURE

OTHER M

WEATHER

LEISURE

FINANCE

JAZZ

CHILDREN

COUNTRY

SOCIAL

NATIONAL M

RELIGION

OLDIES

PHONE IN

FOLK M

TRAVEL

DOCUMENT

When FM is selected, press button

"TA/PTY" for more than two seconds

to switch the function on or off.

To ind a

PTY programme:

- select the

PTY button,

- turn button

G to scroll down the

different types of programmes of-

fered, then conirm your choice,

when the programme of your choice

is displayed press button

M or N to

carry out an automatic search (after

an automatic search the

PTY func-

tion is switched off if no station has

been found).

PTY mode the different types of

programmes can be stored in the

memory. To do this, press the prese-

lection buttons

"1" to "6'' for more

than two seconds. To recall the type

of programme stored in the memory,

briely press the corrresponding but-

ton.

EON system

This system connects stations which

are part of the same network. It

enables the broadcast of trafic in-

formation or a

PTY programme, by

a station that is part of the same

network as the station to which you

are listening.

The service is available when you

have selected the

TA trafic informa-

tion programme or the

PTY function.

Audio functions menu

Select the

"Audio functions" menu

from the

general menu to:

"Activate/Deactivate RDS fre-

quency following",

"Activate/Deactivate

regional

mode",

"Activate/deactivate Radio Text

display", broadcast by the radio

station if available ("RT" is displayed

at the bottom of the screen).

"Activate/deactivate CD details

display", also permits MP3 dis-

play.

54 - Audio equipment and telematics

01-10-2005

Audio equipment and telematics

01-10-2005

Contextual menu

By pressing knob

G, the contextual

menu allows you to access the fol-

lowing functions:

"Inputting a frequency",

"List of stations" to access the

30 stations picked up locally di-

rectly,

"Refresh list" to update this list,

"Display Radio Text" broadcast

by the radio station if it is available

("RT" is displayed at the bottom of

the screen).

When you are in radio mode, press-

ing knob

G enables you to call up

the Radio contextual menu to select

"Read Radio Text" (information

broadcast by the station concern-

ing the programme to which you are

listening) (example: name of singer,

title of the song...).

COMPACT DISC

Selecting CD mode

After inserting a disc, printed face

upwards, the CD drive starts auto-

matically.

If a disc has already been inserted,

press the

''SOURCE'' button to se-

lect CD mode.

Selecting a track

Press button

M to select the follow-

ing track.

Press button

N to return to the start

of the current track or to select the

previous track.

Press several times in succession to

skip several tracks.

Press button

B to

eject the disc from the

drive.

If the CD is not re-

moved within 10 to 15 seconds fol-

lowing ejection, it is re-inserted into

the drive automatically but is not

played.

Ejecting a disc

Accelerated play

Press and hold button

M or N for

forwards or backwards accelerated

play.

Accelerated play stops as soon as

the button is released.

Notes:

• Before inserting a CD, press button

B to check that the drive does not

already contain a CD.

• When the navigation CD is in the

drive, it is not possible to listen to a

in CD mode.

54 - Audio equipment and telematics

01-10-2005

Audio equipment and telematics

01-10-2005

Contextual menu

By pressing knob

G, the contextual

menu allows you to access the fol-

lowing functions:

"Inputting a frequency",

"List of stations" to access the

30 stations picked up locally di-

rectly,

"Refresh list" to update this list,

"Display Radio Text" broadcast

by the radio station if it is available

("RT" is displayed at the bottom of

the screen).

When you are in radio mode, press-

ing knob

G enables you to call up

the Radio contextual menu to select

"Read Radio Text" (information

broadcast by the station concern-

ing the programme to which you are

listening) (example: name of singer,

title of the song...).

COMPACT DISC

Selecting CD mode

After inserting a disc, printed face

upwards, the CD drive starts auto-

matically.

If a disc has already been inserted,

press the

''SOURCE'' button to se-

lect CD mode.

Selecting a track

Press button

M to select the follow-

ing track.

Press button

N to return to the start

of the current track or to select the

previous track.

Press several times in succession to

skip several tracks.

Press button

B to

eject the disc from the

drive.

If the CD is not re-

moved within 10 to 15 seconds fol-

lowing ejection, it is re-inserted into

the drive automatically but is not

played.

Ejecting a disc

Accelerated play

Press and hold button

M or N for

forwards or backwards accelerated

play.

Accelerated play stops as soon as

the button is released.

Notes:

• Before inserting a CD, press button

B to check that the drive does not

already contain a CD.

• When the navigation CD is in the

drive, it is not possible to listen to a

in CD mode.

56 - Audio equipment and telematics

01-10-2005

Audio equipment and telematics

01-10-2005

Contextual menu

By pressing knob

G, the contextual

menu permits you to switch the fol-

lowing functions on or off:

- playing of the start of a track ("Intro-

scan"),

- random play ("Random"),

- programming of the track playing

order,

- list of tracks.

Do not use copied CDs as

these could damage your

player.

Insert circular compact

discs only.

Playing MP3 CDs

Following the insertion of an MP3

CD, playing of the irst song of the

irst MP3 directory begins. You can

select the track to be played using

buttons

M or N or the MP3 directory

using buttons

H or I.

Note: when the navigation CD is in

the drive, it is not possible to listen to

an MP3 CD

in CD mode.

MP3 contextual menu

Selecting a track

To display the list of MP3 directories,

press the

MODE button to enter MP3

mode. When the knob

G is pressed,

the contextual menu permits display-

ing of the

"list of tracks".

In MP3 mode, pressing the knob

enables you to switch the following

functions on or off:

- Playing of the start of each track on

the CD ("Introscan").

- Random play ("Random").

- Repeating of the tracks in the cur-

rent MP3 directory.

- List of MP3 tracks.

This equipment enables you to listen

to music which is usually protected

by copyright in accordance with cur-

rent national and international regu-

lations.

Please refer to these regulations and

comply with them.

The playing and displaying of an

MP3 compilation may depend on the

recording programme and/or the pa-

rameters used.

We recommend use of the ISO 9660

recording standard.

Using buttons

H or I,

select the MP3 direc-

tory to be played.

To open an MP3 di-

rectory, press knob

Using buttons

M or N, se-

lect the track to be played.

Conirm by pressing knob

56 - Audio equipment and telematics

01-10-2005

Audio equipment and telematics

01-10-2005

COMPACT DISC CHANGER

Selecting CD changer mode

Press the

''SOURCE'' button several

times.

Selecting a track

Press button

M to select the follow-

ing track.

Press button

N to return to the start

of the current track or to select the

previous track.

Press several times in succession to

skip several tracks.

Contextual menu

By pressing knob

G, the contextual

menu permits you to switch the fol-

lowing functions on or off:

- playing of the start of the track ("In-

troscan"),

- random play ("Random"),

- programming of the track playing

order,

- list of tracks.

Selecting a disc

Press one of the buttons

''1'' to ''5''

on the audio/telephone to select the

appropriate disc.

Accelerated play

Press and hold button

M or N for

forwards or backwards accelerated

play.

Accelerated play stops as soon as

the button is released.

Buttons

H and I allow

you to select respec-

tively the previous or

following disc in the

changer.

Playing of the irst

track on the disc be-

gins automatically.

Following each change

of source, on returning

to CD changer mode, play will resume

where it stopped.

58 - Audio equipment and telematics

01-10-2005

Audio equipment and telematics

01-10-2005

TELEPHONE

This function is a GSM dual-band tele-

phone (900 and 1 800 MHz) incorpo-

rated in the RT3 GPS audio/telephone

system.

It is a

''hands free'' telephone. This

function is provided by a microphone

located next to the front courtesy

light, the speakers, a steering col-

umn control and voice commands

which allow access to most of the

functions (the audio/telephone con-

trol panel buttons allow access to all

the functions).

Display of the principal

''mobile''

type functions, as well as consulta-

tion of the indexes, is provided by the

multi-function display.

This function is active, whatever

position the ignition key is in even af-

ter thirty minutes, when the message

''Economy mode active'' appears

on the multi-function display.

"Telephone and telematic

services" menu

Press the

MENU button then, using

the knob

G, select the "Telephone

and telematic services" application

and conirm to gain access to the fol-

lowing options:

"Call".

"Service", permits access to the

PEUGEOT services.

"Telephone functions", permits

setting of all of the telephone func-

tions.

"Text messages (SMS)", permits

management of all of the functions

for the text messages (SMS).

Contextual menu

Press button

D to display the tele-

phone contextual menu.

This menu enables you to gain ac-

cess to the following functions:

"List of calls".

"Enter number".

"Access to directory".

"Access to your voice mail" (mes-

sage service of your GSM operator).

Note:

Do not allow yourself to become

distracted when you are behind

the wheel and comply with current

national legislation. The driver is

advised to stop in order to hold a

telephone conversation or carry out

certain actions (manual dialling of a

number, for example).

58 - Audio equipment and telematics

01-10-2005

Audio equipment and telematics

01-10-2005

Within each menu:

Move around and se-

lect a function by turn-

ing the

G button then

validate by pressing

the button.

Using the alphanumeric keypad

For a given button, to input a charac-

ter in the second or subsequent rows

press until you obtain the character

required.

Buttons Associated characters

[1]

1 or

space

[2]

2 or A B C 2 or a b c 2

[3]

3 or D E F 3 or d e f 3

[4]

4 or G H I 4 or g h i 4

[5]

5 or J K L 5 or j k l 5

[6]

6 or M N O 6 or m n o 6

[7]

7 or P Q R S 7 or p q r s 7

[8]

8 or T U V 8 or t u v 8

[9]

9 or W X Y Z 9 or w x y z 9

[0]

0 or + (long

press)

[#]

# or validation

[*]

* or erasing of last character

input (long press)

Cancel an operation using the

''ESC''

button.

Using the menus, example

"Telephone functions"

Press the

''MENU'' button to display

the

general menu. Select the "Tele-

phone and telematic services"

application, validate

"Telephone

functions" to access the principal

telephone functions, then the vari-

ous menus, in order to reach the one

required.

This menu allows you to access the

following functions:

- "Network": allows you to select

the network search mode and to

see the networks available.

- "Duration of calls": allows you

to consult the duration recorder of

calls made and zero re-set.

- "Process the PIN code": allows

you to use or modify the PIN code.

- "Call options": allows you to con-

igure the calls with entering of my

number, automatic answering after

X rings, speciication of ring options

and allows you to conigure the

diversion number for the text mes-

sages and clear the list of calls and

the text messages.

60 - Audio equipment and telematics

01-10-2005

Audio equipment and telematics

01-10-2005

Installing the SIM card

Open lap

L by pressing the point of a

pencil on the circular opening above

the lap.

Insert your SIM card, available from

a mobile telephone operator, as in-

dicated in the graphics, then close

the lap.

Note: removal or insertion of the SIM

card must only be carried out after

the RT3 audio/telephone has been

switched off (key in position S (igni-

tion switch) and screen off).

If you have a duplicate card, when

carrying out the irst installation or to

update your directory you must insert

your mobile telephone's SIM card

then transfer its information to the

RT3 audio/telephone directory - refer

to the Directory main menu.

Input your PIN code using the al-

phanumeric keypad and validate by

pressing button

G or button # to ac-

cess the network. Connection to the

network is validated by the appear-

ance of a symbol on the screen.

Warning: if you make three errors in

succession when inputting your PIN

code, your SIM card will be blocked.

To unblock it, you will need to input

the PUK code. The PUK code will be

supplied to you by the person sell-

ing your SIM card (input of the PUK

code allows for 10 errors in succes-

sion; after this the SIM card becomes

permanently unusable).

Note: the PIN code is required each

time the ignition is switched on, un-

less the PIN code has been stored

in the memory or protection by PIN

code is not activated on the SIM

card.

Inputting the PIN code

Cancelling of PIN code request

In the menu

''Telephone functions''

select

''Process the PIN code'', then

validate the

''Cancel'' function.

Warning: in this case, do not lose

your SIM card. Losing it would mean

anyone who inds it would be able to

make unlimited calls.

60 - Audio equipment and telematics

01-10-2005

Audio equipment and telematics

01-10-2005

Telephone function screens

Not in use

This screen indicates the presence

of voice messages or text mes-

sages (SMS) not listened to/read,

the cumulative time in use since the

last zero reset and the status of your

telephone.

In use

This screen indicates the time

elapsed since the start of the con-

versation, as well as the number* or

name of the person to whom you are

speaking (if recorded in the index)

and the status of your telephone.

* If this option and service are avail-

able.

Making a call

Press button

D to display the contex-

tual menu of the telephone.

Entering a number

Select the function

"Call"

then

''Enter number''

then enter the number

of the person you wish to

speak to using the alpha-

numeric keypad.

Press button

D to make the call.

Making a call from a directory

Select the

"Call" function then "Di-

rectory" to access all the iles con-

taining a telephone number or the

"List of calls" function to access the

list of the last twenty incoming (if the

number display option is active) or

outgoing calls.

Note: there are two directories, the

RT3 audio/telephone directory and

the SIM card directory.

Receiving a call

When a ringing sounds to

let you know that a call is

waiting, you can choose

either to accept it by

pressing button

D or the

end of the steering wheel

remote control or not to accept it by

pressing the button

Q or by selecting

and validating the

"NO" button on

the

"Answer?" screen.

If you accept the call, to end your

communication, press button

If you do not accept the call, it is

transferred to your voice mail or to a

call diversion number.

62 - Audio equipment and telematics

01-10-2005

Audio equipment and telematics

01-10-2005

Text messages (SMS)

Receiving text messages

When the buzzer sounds (if the SMS

text messages buzzer option is ac-

tive) and a superimposed screen

announces

"Do you wish to read

the new text message (SMS)?",

you can choose to read the text mes-

sage received by selecting and vali-

dating

"YES" or postpone reading

it by selecting and validating

"NO",

by pressing the

"ESC" button or by

waiting until the announcement dis-

appears. The message is read by the

voice synthesiser, if it is active.

Note: the old text messages stored

and the new text messages, the

reading of which you wished to post-

pone, can be consulted. Press the

"MENU" button then validate the

"Telematic" icon, select

"Text mes-

sages (SMS)" and validate the func-

tion

"Reading of SMS received"

by pressing button

G. Then scroll

through the list by turning the button

and press the button to select the

text message to be read (if the voice

synthesiser is active).

Sending a text message

In the menu

"Text messages

(SMS)" validate the function "Typing

of an SMS". Type your text message

using the alphanumeric keypad and

validate it using the

"OK" button to

store it or validate the

"Send" button

to send it. Validation of the

"Send"

button enables you to enter the

number of your recipient or select it

from the directory or from the list of

calls and send the message.

"Duration of calls" menu

Select the

"Duration of calls"

function from the

"Telephone func-

tions" menu to consult the duration

counters for the calls made. The par-

tial counter totals the duration of the

calls since the last zero reset carried

out using the

"Zero reset" button.

"Telephone options" menu

Select the

"Call options" function

from the

"Telephone functions"

menu to access the functions:

"Conigure the calls" which per-

mits activation and deactivation of

the "show my number" and "auto-

matic answering after X rings" func-

tions

"Ringing options" which permits

adjustment of the ringing volume

for voice calls, activation of the text

messages (SMS) receipt buzzer

and selection of a ring tone from

the ive offered

"Voice call diversion number"

which permits recording of the call

diversion number chosen by the

customer, otherwise the call will be

transferred to the voice mail if the

call diversion box is ticked.

Replying to a text messages

After reading a text messages, you

can:

Reply directly to the sender by se-

lecting

"Reply". A screen appears

automatically to enable you to enter

your message.

Record the number of the sender of

the text message in your current di-

rectory by selecting

"Record".

62 - Audio equipment and telematics

01-10-2005

Audio equipment and telematics

01-10-2005

Services*

Press button

E to dis-

play the

"Services"

menu and select one of

the following services:

Emergency call*

In an emergency, press but-

ton

V until a signal is heard

and a call validation/deletion

screen is displayed (delay

of 6 seconds) or enter

112

directly.

Make an emergency call if

you are involved in a situa-

tion which leads you to fear serious

consequences (injuries, ...) for those

who are exposed to it (if you witness

or are involved in a accident resulting

in injuries, an attack, ...).

Before making a call of this kind, the

audio/telephone must detect a cel-

lular network.

If you have not signed the speciic

PEUGEOT contract, the parameters

of the

SOS button are set so that a

call is made to

112 - unique number

made available by the worldwide

GSM network, reserved for emer-

gency calls.

No security mode is required and,

depending on the network or country,

you do not need to insert your SIM

card or enter your PIN.

If you have signed the speciic

PEUGEOT contract, your call will

be located and you will be put in

contact with a PEUGEOT assist-

ance team.

For further details, refer to the gen-

eral conditions of your contract.

"PEUGEOT Assistance"/

Emergency call
During a connection to "PEUGOT

Assistance" or an emergency call,

it is not possible to send or receive

calls or SMS text messages; these

will be transferred to your voice

mail.

In this case, a green diode lashes

on the RT3 GPS audio/telephone

panel, when the emergency call or

"PEUGEOT Assistance" call pro-

cedure begins, then lights continu-

ously when the call is taken by the

services concerned.

* If option and service available.

"Customer Contact Centre" which

enables you to contact the

PEUGEOT

Customer Contact Centre directly

and access the services offered (this

type of call is suspended if an emer-

gency or breakown call is made).

"PEUGEOT Assistance" which

enables you to contact the call cen-

tre which controls the PEUGEOT

breakdown service directly and

receive rapid assistance (you have

6 seconds within which to cancel

the call when it is made). During the

breakdown call phase it is not pos-

sible to make any other calls with the

exception of emergency calls. If you

have signed the speciic PEUGEOT

contract, your call will be located.

"Operator services" which gives

access to the list of services spe-

ciic to your operator (e.g.: customer

service, consumption monitoring,

news, stock market, weather, travel,

games, etc) if they are available.

64 - Audio equipment and telematics

01-10-2005

Audio equipment and telematics

01-10-2005

The Directory

General

The directory can contain up to 396

iles divided into 4 independent sub-

directories (

"User 1", "User 2",

"User 3" and "User 4").

When the system is delivered, the

default current directory is

"User 4".

A ile can contain:

- an address,

- 5 telephone numbers,

- 5 e-mails,

- a note,

- a voice description which can be

used for a voice command.

The address is entered by indicating

the town and the street.

Note: if you enter the address in the

absence of the navigation CD ROM,

you will not be able to use this ad-

dress for navigation.

To modify an existing ile, select it us-

ing the

"Consult or modify a ile"

function of the

"Management of di-

rectory iles" menu then make the

modiications.

Note: when the address is entered,

the navigation CD-Rom must be

present in order to obtain guidance

to this destination.

"Directory" menu

Press the

MENU button then, using

the knob

G, select the "Directory"

application and conirm to gain ac-

cess to the following options:

"Management of directory iles"

with:

•

"Consult or modify a ile".

•

"Add a ile", enter the descrip-

tion of the new ile then select

on the ile the section to be

completed then conirm and

enter the information.

•

"Delete a ile".

•

"Delete all iles" in a directory.

"Directory coniguration" with:

•

"Select a directory".

•

"Name a directory".

•

"Select the starting directory"

(current directory).

"File transfer", with:

•

"Exchange by infra-red" of the

iles to portable equipment and

vice versa.

•

"Exchange with the SIM card"

of the information entered in the

RT3 GPS audio/telephone.

"Consult or modify a ile"

64 - Audio equipment and telematics

01-10-2005

Audio equipment and telematics

01-10-2005

Description of a directory ile

When a description is linked to a

directory ile, you can record the

description vocally so that it can be

used subsequently for direct access

by voice commands (e.g.:

"Call"

"[Name of the voice description]"

"Guide to" "[Name of the voice

description]").

Select "Consult or modify the ile"

from the "Management of direc-

tory iles" menu to access the screen

which permits entering and recording

of the description.

TMC (Trafic Message Channel)

RDS Trafic Information

You can access information regard-

ing the trafic conditions from the

"Navigation - Trafic Info" menu,

then from the

"TMC Trafic Informa-

tion" function (see section "Satellite

navigation system").

"File transfer"

Press the record button and follow

the instructions.

Send all of the iles to the SIM card

from the current directory of your

RT3 GPS audio/telephone.

Send one ile to the SIM card from

the current directory of your RT3

GPS audio/telephone.

Receive all of the iles from the SIM

card in the current directory of the

RT3 GPS audio/telephone.

Receive one ile from the SIM card in

the current directory of the RT3 GPS

audio/telephone.

Reminder: when transferring a ile

from the RT3 GPS audio/telephone

to the SIM card, only the irst number

entered in the ile is recorded.

Note: The SIM card represents an

independent collection of information

among which the telephone numbers

may be accessible by consulting the

current directory.

"Exchange by infra-red" be-

tween the RT3 GPS audio/telephone

and portable equipment (which has

an infra-red port) all or some of the

iles recorded in the current direc-

tory.

Following selection of the

"File

transfer" menu and of the direction

of this transfer, you must initiate the

exchange by presenting at the same

time opposite the infra-red port, the

portable equipment on which you

started the transfer (consult the in-

structions provided with this equip-

ment). A message conirms that the

exchange is progressing correctly.

"Exchange with the SIM card":

Peugeot 1007 Dag (2005.5). Instruction - part 4