Content .. 6 7 8

Peugeot 206 P Dag (2010.5). Instruction - part 8

107

Button

Function

Radio On/Off.

Decrease volume.

Increase volume.



CD eject.

RDS *

RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.

TA *

Trafﬁ c information priority on/off.
Press for more than 2 seconds: PTY function on/off.



Setting of the bass, treble, loudness, sound distribution and automatic volume correction.



Increase the setting of the functions associated with button G .



Decrease the setting of the functions associated with button G .



Manual and automatic search of higher frequencies.

Selection of the next track on the CD and of the PTY (radio).

MAN

Manual/automatic operation of buttons J and L .



Manual and automatic search of lower frequencies.

Selection of the previous track on the CD and of the PTY (radio).

CH. CD

Selection of the CD changer source.
Press for more than 2 seconds: random play.

Selection of the CD source.
Press for more than 2 seconds: random play.

Radio

Selection of the radio source. Selection of the FM1, FM2, FMAST, AM wavebands.
Press for more than 2 seconds: automatic storing of stations (autostore).

1 to 6

1 2 3 4 5 6

Selection of the stored station.
Press for more than 2 seconds: storing of a station.

* According to destination country.

108

GENERAL FUNCTIONS

On/off
With the ignition key in

the  accessories  position
or  with  the  ignition  on,
press button  A  to switch

the audio equipment on

or off.

Anti-theft system
The audio equipment is coded in such

a way that it can only operate in your

vehicle. It would not work if ﬁ tted in an-

other vehicle.
The anti-theft system is automatic
and requires no action on your part.

Press button C to increase the audio

equipment volume or button B to de-

crease it.
A continuous press of buttons B and C
adjusts the volume gradually.

AUDIO SETTINGS

Press  button   G   several
times  in  succession  to
access the bass  (BASS) ,
treble   (TREB) ,  loudness
(LOUD) ,  fader   (FAD) ,
balance  (BAL)  and auto-
matic  volume  correction
settings.
Exit  from  audio  mode

is automatic after a few

seconds without any action or by press-
ing button G

following conﬁ guration of

the automatic volume correction.

Adjusting the bass

When   "BASS"   is  dis-
played,  press  button   H
or  I  to change the setting.
   -

"BASS -9" for a mini-
mum bass setting,

"BASS 0" for a stan-
dard setting,

"BASS +9"

for a maximum bass

setting.

  Adjusting the treble
When  "TREB"  is displayed, press but-
ton  H  or  I  to change the setting.
   -

"TREB -9" for a minimum treble
setting,

"TREB 0" for a standard setting,

"TREB +9"

for a maximum treble

setting.

  Adjusting the loudness (LOUD)
This function automatically emphasises
bass and treble tones.
Press  button   H   or   I   to  switch  the  func-
tion on or off.

Note: bass, treble and loudness set-

tings are speciﬁ c to each source. They

can be set differently for the radio

or CD.

The audio equipment can operate for
30 minutes without the ignition being
switched on.

109

  Adjusting the front/rear sound
distribution (Fader)
When   "FAD"   is  displayed,  press
button  H  or  I .
Button   H   increases  the  volume  in  the
front.
Button   I   increases  the  volume  in  the
rear.

  Adjusting the right/left sound
distribution (Balance)
When   "BAL"   is  displayed,  press
button  H  or  I .
Button  H  increases the volume on the
right.
Button   I   increases  the  volume  on  the
left.

  Automatic volume correction
This  function  automatically  adjusts  the
volume  in  relation  to  the  speed  of  the
vehicle.
Press  button   H   or   I   to  switch  the  func-
tion on or off.

RADIO

  Notes on radio reception
Your  car  radio  will  be  subject  to  phe-
nomena  which  do  not  affect  domestic
radio sets. Both AM and FM reception is
subject to various forms of interference.

This is no reﬂ ection on the quality of the

audio equipment, but is due to the na-

ture of the signals and the way in which
they are transmitted.
On  AM,  interference  may  be  noticed
when passing under high voltage power
lines or bridges, or in tunnels.
On  FM,  interference  may  be  the  result
of  increasing  distance  from  the  trans-

mitter, deﬂ ection of the signals by ob-

stacles (mountains, hills, buildings,
etc.), or of being in an area which is not
covered by a transmitter.

Selecting radio mode

Press button O .

Selecting a waveband

Press button O

brieﬂ y

to  select  the  FM1,  FM2,
FMast  and  AM  wave-
bands.

109

  Automatic volume correction
This  function  automatically  adjusts  the
volume  in  relation  to  the  speed  of  the
vehicle.
Press  button   H   or   I   to  switch  the  func-
tion on or off.

RADIO

  Notes on radio reception
Your  car  radio  will  be  subject  to  phe-
nomena  which  do  not  affect  domestic
radio sets. Both AM and FM reception is
subject to various forms of interference.

This is no reﬂ ection on the quality of the

audio equipment, but is due to the na-

mitter, deﬂ ection of the signals by ob-

stacles (mountains, hills, buildings,
etc.), or of being in an area which is not
covered by a transmitter.

Selecting radio mode

Press button O .

Selecting a waveband

Press button O

brieﬂ y

to  select  the  FM1,  FM2,
FMast  and  AM  wave-
bands.

110

Automatic station search

Press button J or L

brieﬂ y to listen to

the station immediately above or below.
By continuing to press the button in the
direction selected, you will obtain con-

tinuous scrolling of the frequencies.

The scrolling stops at the ﬁ rst station

found when the button is released.
If the TA

trafﬁ c information programme

is selected, only stations broadcasting
this type of programme are selected.
Searching for a station takes place ﬁ rst

in  "LO"  sensitivity (selection of the most
powerful  transmitters)  during  scanning
of the waveband, then in  "DX"  sensitiv-

ity (selection of the weakest and most

distant transmitters).
To carry out a "DX" sensitivity search
directly, press button J or L twice.

  Manual station search
Press the  "MAN"  button.
Press button  J  or  L

brieﬂ y to increase or

decrease the frequency displayed.
By continuing to press the button in the
direction selected, you will obtain con-

tinuous scrolling of the frequency.
The scrolling stops as soon as the but-
ton is released.
Pressing  the   "MAN"   button  again  re-
turns  you  to  the  automatic  station
search.

Manual storing of stations
Select the station required.
Press one of the buttons "1" to "6" for
more than two seconds.
The sound stops then becomes audible

again, conﬁ rming that the station has

been stored.

Automatic storing of FM stations
(autostore)

Press button O for more
than two seconds.

  Recalling stored stations
On  each  waveband,  press  one  of  the
buttons   "1"   to   "6"

brieﬂ y to recall the

corresponding stored station.

Your  radio  automatically  stores  the
6  stations  with  the  strongest  signal  on
FM .  These  stations  are  stored  on  the
FMast waveband.
If it is not possible to ﬁ nd six stations, the

unused memories remain unchanged.

111

RDS *

  Using the RDS on FM
The  RDS  (Radio  Data  System)  allows
you  to  continue  listening  to  the  same

station, whatever frequency it is using

in the region you are travelling through.

Press the "RDS" button

brieﬂ y to switch the func-

tion on or off.

The multifunction screen will indicate:
-

"RDS" if the function is selected,

"(RDS)" if the function is selected
but not available.

  RDS station following
The display indicates the name of the sta-
tion selected. When the RDS is selected,
the  radio  searches  continuously  for  the
transmitter which is broadcasting the se-
lected station with the best reception.

Trafﬁ c information programme (TA)

Regional following mode (REG)
When they are part of a network, cer-

tain  stations  broadcast  regional  pro-
grammes  in  the  various  areas  they
serve.  The  regional  following  mode
allows  you  to  continue  listening  to  the
same programme.
To  do  this,  press  the   "RDS"   button  for
more  than  two  seconds  to  switch  the
function on or off.

Any trafﬁ c information announcement

will be given priority, whatever source

you are listening to (radio, CD).
If  you  wish  to  interrupt  a  message,
press the  "TA"  button; this switches the
function off.

Note: the volume of the trafﬁ c infor-

mation is independent of the volume
of  normal  radio  listening.  You  can
adjust  it  using  the  volume  button.
The setting will be stored and will be
used for subsequent messages.

Search by type of programme (PTY)
This allows you to listen to stations broad-

casting a speciﬁ c type of programme

(News, Culture, Sport, Rock...).

When   FM   is  selected,
press the  "TA"  button for
more  than  two  seconds
to switch the function on
or off.

To search for a PTY programme:

select the PTY function,

press button J or L

brieﬂ y to scroll

down the list of the different types of
programme offered,

when the programme of your choice
is displayed, press button  J  or  L  for
more than two seconds to carry out
an  automatic  search  (following  an
automatic search, the  PTY  function
is switched off).

In  PTY  mode,  the  types  of programme
can be stored. To do this, press the pre-
selection  buttons   "1"   to   "6"  for  more
than  two  seconds.  Press  the  corre-

sponding button brieﬂ y to recall the type

of programme stored.

EON system
This system connects stations which are

part of the same network. It permits the

broadcasting of TA

trafﬁ c information or

of a PTY programme broadcast by a sta-

tion which is part of the same network as

the station to which you are listening.
This service is available when you have
selected the TA

trafﬁ c information pro-

gramme or the PTY search by type of
programme.

Press the "TA" button
to switch the function on
or off.

The multifunction screen will indicate:
-

"TA" if the function is selected,

"(TA)" if the function is selected but
not available.

* According to destination country.

112

COMPACT DISC MODE

Selecting CD mode

Ejecting a disc

Selecting a track

Press button J

to select the next track.

Press button L to return to the start of

the current track or to select the previ-

ous track.

Accelerated play
Press and hold button J or L for for-

wards or backwards accelerated play.
Accelerated play stops as soon as the
button is released.

Random play (RDM)
When the CD player is selected, press

button N

for two seconds. The tracks

will be played in random order. Pressing
button N again for two seconds returns
you to normal play.
The random play mode is switched

off each time the audio equipment is

switched off.

The use of copied compact discs
may cause malfunctions.
Insert circular compact discs only.

Press button D to eject
the disc from the player.

After  inserting  a  disc,
printed  face  uppermost,
the  player  starts  auto-
matically.

If the player already contains a disc,
press button N .

Content .. 6 7 8