Nissan Titan (2019 year). Instruction

Never leave the keys in the vehicle.

As many as four Intelligent Keys can be
registered and used with one vehicle. The
new keys must be registered prior to the
use with the Intelligent Key system and
NISSAN Vehicle Immobilizer System of your
vehicle. It is recommended that you visit a
NISSAN dealer for this service. Since the
registration process requires erasing all
memory in the Intelligent Key components
when registering new keys, be sure to take
all Intelligent Keys that you have to the
NISSAN dealer.

A key number plate is supplied with your
keys. Record the key number and keep it in
a safe place (such as your wallet), not in the
vehicle. If you lose your keys, it is recom-
mended that you visit a NISSAN dealer for
duplicates by using the key number.
NISSAN does not record key numbers so it
is very important to keep track of your key
number plate.

A key number is only necessary when you
have lost all keys and do not have one to
duplicate from. If you still have a key, it can
be duplicated without knowing the key
number.

CAUTION

Listed below are conditions or occur-
rences which will damage the Intelli-
gent Key:

∙ Do not allow the Intelligent Key, which

contains electrical components, to
come into contact with water or salt
water. This could affect the system
function.

∙ Do not drop the Intelligent Key.

∙ Do not strike the Intelligent Key

sharply against another object.

∙ Do not change or modify the Intelli-

gent Key.

∙ Wetting may damage the Intelligent

Key. If the Intelligent Key gets wet, im-
mediately wipe until it is completely
dry.

∙ Do not place the Intelligent Key for an

extended period in an area where
temperatures exceed 60°C (140°F).

∙ Do not attach the Intelligent Key with

a key holder that contains a magnet.

∙ Do not place the Intelligent Key near

equipment that produces a magnetic
field, such as a TV, audio equipment
and personal computers.

If an Intelligent Key is lost or stolen, NISSAN
recommends erasing the ID code of that
Intelligent Key from the vehicle. This may
prevent the unauthorized use of the Intelli-
gent Key to operate the vehicle. For infor-
mation regarding the erasing procedure, it
is recommended that you visit a NISSAN
dealer.

Type B (if so equipped)

LPD2844

Pre-driving checks and adjustments

3-3

Mechanical key

The Intelligent Key contains the mechani-
cal key.

To remove the mechanical key, release the
lock knob on the back of the Intelligent Key.

To install the mechanical key, firmly insert it
into the Intelligent Key until the lock knob
returns to the lock position.

Use the mechanical key to lock or unlock
the driver’s door or tailgate.

CAUTION

Always carry the mechanical key in-
stalled in the Intelligent Key slot.

For additional information, refer to “Doors”
or “Tailgate” in this section.

Valet hand-off

When you have to leave a key with a valet,
give them the Intelligent Key itself, keep the
mechanical key and master key with you to
protect your belongings.

To prevent the glove box from being
opened during valet hand-off, follow the
procedures below:

1. Remove the mechanical key from the

Intelligent Key.

2. Lock the glove box with the mechani-

cal key or master key.

3. Hand the Intelligent Key without the

mechanical key to the valet, keep the
mechanical and master key with you.

For additional information, refer to “Stor-
age” in the “Instruments and controls” sec-
tion of this manual and “Tailgate” in this
section.

NISSAN VEHICLE IMMOBILIZER
SYSTEM KEYS

You can only drive your vehicle using the
Intelligent Keys which are registered to the
NISSAN Vehicle Immobilizer System com-
ponents in your vehicle.

The mechanical key can be used for all the
locks.

Never leave the keys in the vehicle.

Additional or replacement keys:

If you still have a key, the key number is not
necessary when you need extra NISSAN
Vehicle Immobilizer System keys. Your ex-
isting key can be duplicated without know-
ing the key number. As many as four
NISSAN Vehicle Immobilizer System keys
can be used with one vehicle. You should
bring all NISSAN Vehicle Immobilizer Sys-
tem keys that you have to the NISSAN
dealer for registration. This is because the
registration process will erase the memory
of all key codes previously registered into
the NISSAN Vehicle Immobilizer System. Af-
ter the registration process, these compo-
nents will only recognize keys coded into
the NISSAN Vehicle Immobilizer System
during registration. Any key that is not

SPA1951

3-4

Pre-driving checks and adjustments

given to the dealer at the time of registra-
tion will no longer be able to start your
vehicle.

CAUTION

Do not allow the immobilizer system
key, which contains an electrical tran-
sponder, to come into contact with wa-
ter or salt water. This could affect sys-
tem function.

When the doors are locked using one of the
following methods, the doors cannot be
opened using the inside or outside door
handles. The doors must be unlocked to
open the doors.

WARNING

∙ Always have the doors locked while

driving. Along with the use of seat
belts, this provides greater safety in
the event of an accident by helping to
prevent persons from being thrown
from the vehicle. This also helps keep
children and others from unintention-
ally opening the doors, and will help
keep out intruders.

∙ Before opening any door, always look

for and avoid oncoming traffic.

∙ To help avoid risk of injury or death

through unintended operation of the
vehicle and or its systems, including
entrapment in windows or inadver-
tent door lock activation, do not leave
children, people who require the as-
sistance of others or pets unattended
in your vehicle. Additionally, the tem-
perature inside a closed vehicle on a
warm day can quickly become high
enough to cause a significant risk of
injury or death to people and pets.

DOORS

Pre-driving checks and adjustments

3-5

LOCKING WITH KEY

To lock or unlock the vehicle, turn the key as
shown.

Manual

To lock a door, turn the key toward the front
of the vehicle

䊊

. To unlock, turn the key

toward the rear of the vehicle

䊊

Power (if so equipped)

The power door lock system allows you to
lock or unlock all doors at the same time.

Turning the key toward the front

䊊

of the

vehicle locks all doors.

Turning the key one time toward the rear

䊊

of the vehicle unlocks that door. From

that position, returning the key to neutral

䊊

(where the key can only be removed and

inserted) and turning it toward the rear
again within 5 seconds unlocks all doors

䊊

Opening and closing windows (if
so equipped)

The driver’s door key operation allows you
to open and close windows equipped with
automatic operation at the same time.

∙ To open the windows, turn the driver’s

door key toward the rear of the vehicle
for longer than 1 second.

∙ To close the windows, turn the driver’s

door key toward the front of the vehicle
for longer than 1 second.

Windows stop when the key cylinder is re-
leased.

Driver’s side

WPD0311

WPD0444

3-6

Pre-driving checks and adjustments

LOCKING WITH INSIDE LOCK KNOB

To lock the door without the key, move the
inside lock to the lock position

䊊

, then

close the door.

To unlock the door without the key, move
the inside lock knob to the unlock position

䊊

LOCKING WITH POWER DOOR
LOCK SWITCH

To lock all the doors and the tailgate lock (if
so equipped) without a key, push the door
lock switch (driver’s or front passenger’s
side) to the lock position

䊊

. When locking

the door this way, be certain not to leave
the key inside the vehicle.

To unlock all the doors and the tailgate lock
(if so equipped) without a key, push the
door lock switch (driver’s or front passen-
ger’s side) to the unlock position

䊊

Lockout protection

With the Intelligent Key left in the vehicle, if
all doors are locked, then closed, a chime
will sound after the last door is closed and
all doors will unlock automatically.

These functions help to prevent the Intelli-
gent Key from being accidentally locked
inside the vehicle.

Inside lock

LPD2092

WPD0381

Pre-driving checks and adjustments

3-7

REAR DOORS (King Cab® models)

1. Open the driver’s or passenger’s door.

2. From the outside, pull the door handle

䊊

toward you.

3. Open the door to the desired position.

LPD0278

LPD2591

LPD2592

3-8

Pre-driving checks and adjustments

CAUTION

Be careful when opening and exiting
the driver’s side rear door if the fuel-
filler door is open. This may cause dam-
age to the driver’s side rear door or fuel-
filler door if you open fully and they
make contact.

AUTOMATIC DOOR LOCKS (if so
equipped)

∙ All doors lock automatically when the

vehicle

speed

reaches

mph

(24 km/h).

NOTE:

The automatic door unlock function can
be changed (if so equipped) using the
“Vehicle Settings” of the vehicle informa-
tion display. For additional information
refer to “Vehicle information display” in
the “Instruments and Controls” section
of this manual.

LPD2593

LPD2594

Pre-driving checks and adjustments

3-9

CHILD SAFETY REAR DOOR LOCK
(if so equipped)

Child safety locks help prevent the rear
doors from being opened accidentally, es-
pecially when small children are in the ve-
hicle.

The child safety lock levers are located on
the edge of the rear doors.

When the lever is in the unlock position

䊊

the door can be opened from the outside
or the inside.

When the lever is in the LOCK position

䊊

the door can be opened only from the
outside.

WARNING

∙ Radio waves could adversely affect

electric medical equipment. Those
who use a pacemaker should contact
the

electric

medical

equipment

manufacturer for the possible influ-
ences before use.

∙ The Intelligent Key transmits radio

waves when the buttons are pressed.
The FAA advises the radio waves may
affect aircraft navigation and com-
munication systems. Do not operate
the Intelligent Key while on an air-
plane. Make sure the buttons are not
operated unintentionally when the
unit is stored for a flight.

∙ Never leave the Intelligent Key in the

vehicle when you leave the vehicle.

The Intelligent Key system can operate all
the door locks using the remote control
function or pushing the request switch (if
so equipped) on the vehicle without taking
the key out from a pocket or purse. The
operating environment and/or conditions
may affect the Intelligent Key system op-
eration.

Be sure to read the following before using
the Intelligent Key system.

LPD2433

NISSAN INTELLIGENT KEY®

3-10

Pre-driving checks and adjustments

CAUTION

Be sure to carry the Intelligent Key with
you when operating the vehicle.

The Intelligent Key is capable of receiving
and transmitting radio waves. The Intelli-
gent Key system transmits weak radio
waves from various distances. Environ-
mental conditions may interfere with the
operation of the Intelligent Key system un-
der the following operating conditions:

∙ When operating near a location where

strong radio waves are transmitted,
such as a TV tower, power station and
broadcasting station.

∙ When in possession of wireless equip-

ment, such as a cellular telephone,
transceiver, or a CB radio.

∙ When the Intelligent Key is in contact

with or covered by metallic materials.

∙ When any type of radio wave remote

control is used nearby.

∙ When the Intelligent Key is placed near

an electric appliance such as a personal
computer.

∙ When the vehicle is parked near a park-

ing meter.

In such cases, correct the operating condi-
tions before using the Intelligent Key func-
tion or use the mechanical key.

Although the life of the battery varies de-
pending on the operating conditions, the
battery’s life is approximately two years. If
the battery is discharged, replace it with a
new one.

When the Intelligent Key battery is low, a
yellow indicator illuminates with the mes-
sage “Warning, Key ID Incorrect” in the ve-
hicle information display. When the Intelli-
gent Key battery is low, the NISSAN
Intelligent

Key®

warning

light

(if

equipped) will blink green. For additional
information, refer to “Vehicle information
display warnings and indicators” in the “In-
struments and controls” section of this
manual.

Since the Intelligent Key is capable of re-
ceiving radio waves, if the key is left near
equipment which transmits strong radio
waves, such as signals from a TV and per-
sonal computer, the battery life may be-
come shorter.

For additional information, refer to “Battery
replacement” in the “Do-it-yourself ” section
of this manual.

As many as four Intelligent Keys can be
registered and used with one vehicle. For
information about the purchase and use of
additional Intelligent Keys, it is recom-
mended that you visit a NISSAN dealer.

Pre-driving checks and adjustments

3-11

OPERATING RANGE

The Intelligent Key functions can only be
used when the Intelligent Key is within the
specified operating range from the request
switch

䊊

(if so equipped).

When the Intelligent Key battery is dis-
charged or strong radio waves are present
near the operating location, the Intelligent
Key operating range becomes narrower,
and the Intelligent Key may not function
properly.

The operating range is within 31.50 in
(80 cm) from each request switch

䊊

If the Intelligent Key is too close to the door
glass or handle, the request switches may
not function.

When the Intelligent Key is within the oper-
ating range, it is possible for anyone, even
someone who does not carry the Intelli-
gent Key, to push the request switch to
lock/unlock the doors.

DOOR LOCKS/UNLOCKS
PRECAUTION

∙ Do not push the door handle request

switch (if so equipped) with the Intelli-
gent Key held in your hand as illustrated.
The close distance to the door handle
will cause the Intelligent Key system to
have difficulty recognizing that the In-
telligent Key is outside the vehicle.

∙ After locking with the door handle re-

quest switch (if so equipped), verify the
doors are securely locked by testing
them.

LPD2338

LPD2554

3-12

Pre-driving checks and adjustments

∙ To prevent the Intelligent Key from be-

ing left inside the vehicle, make sure you
carry the Intelligent Key with you and
then lock the doors.

∙ Do not pull the door handle before

pushing

the

door

handle

request

switch (if so equipped). The door will be
unlocked but will not open. Release the
door handle once and pull it again to
open the door.

NISSAN INTELLIGENT KEY®
OPERATION

You can lock or unlock the doors without
taking the Intelligent Key out of your pocket
or bag.

When you carry the Intelligent Key with you,
you can lock or unlock all doors by pushing
the door handle request switch (if so
equipped) within the range of operation.

Locking doors

1. Move the shift lever to the P (Park) posi-

tion, place the ignition switch in the
LOCK position and make sure you carry
the Intelligent Key with you.

2. Close the driver’s door and press the

driver’s door request switch OR close
all doors and press any door request
switch while carrying the Intelligent Key
with you.

3. Push the door handle request switch (if

so equipped) while carrying the Intelli-
gent Key with you.

LPD2382

LPD2918

Pre-driving checks and adjustments

3-13

4. All doors and the tailgate lock (if so

equipped) will lock.

5. The hazard indicator lights flash twice,

the outside chirp sounds twice, and the
front and tail lights may turn on for
10 seconds.

NOTE:

∙ Request switches (if so equipped) for

all doors can be deactivated when the
“I-Key Door Lock” setting is switched
to OFF in the Vehicle Settings of the
vehicle information display. For addi-
tional information, refer to “Vehicle
information display” in the “Instru-
ments and controls” section of this
manual.

∙ Doors and the tailgate lock (if so

equipped) will lock with the door
handle request switch

䊊

while the

ignition switch is not in the LOCK po-
sition.

∙ Doors do not lock by pushing the door

handle request switch while the driv-
er’s door is open. However, doors lock
with the mechanical key even if any
door is open.

∙ Doors and the tailgate lock (if so

equipped) do not lock with the door
handle request switch if the Intelli-
gent Key is inside the vehicle. A beep
will sound to warn you. However,
when an Intelligent Key is inside the
vehicle, doors can be locked with an-
other Intelligent Key.

CAUTION

∙ After locking the doors using the re-

quest switch (if so equipped), make
sure that the doors have been se-
curely locked by operating the door
handles.

∙ When locking the doors using the re-

quest switch (if so equipped), make
sure to have the Intelligent Key in your
possession before operating the re-
quest switch (if so equipped) to pre-
vent the Intelligent Key from being
left in the vehicle.

∙ The request switch is operational only

when the Intelligent Key has been de-
tected by the Intelligent Key system.

Lockout protection

To prevent the Intelligent Key from being
accidentally locked in the vehicle, lockout
protection is equipped with the Intelligent
Key system.

When any door is open, the doors are
locked, and then the Intelligent Key is put
inside the vehicle and all the doors are
closed; a chime will sound and the lock will
automatically unlock.

LPD2579

3-14

Pre-driving checks and adjustments

NOTE:

The doors may not lock when the Intelli-
gent Key is in the same hand that is op-
erating the request switch to lock the
door. Put the Intelligent Key in a purse,
pocket or your other hand.

CAUTION

The lockout protection may not func-
tion under the following conditions:

∙ When the Intelligent Key is placed on

top of the instrument panel.

∙ When the Intelligent Key is placed in-

side the glove box or a storage bin.

∙ When the Intelligent Key is placed in-

side the door pockets.

∙ When the Intelligent Key is placed in-

side or near metallic materials.

Unlocking doors

1. Carry the Intelligent Key.

2. Push the door handle request switch (if

so equipped).

3. The door will unlock and the hazard

indicator lights flash once, the outside
chirp sounds once, and the front and
tail lights may turn on for 30 seconds.

4. Push the door handle request switch

again within one minute.

5. The outside chirp will sound once and

the remaining doors and tailgate lock
(if so equipped) will unlock.

NOTE:

∙ If “Selective Unlock” is turned OFF in

the Vehicle Settings, all doors and
tailgate lock (if so equipped) will un-
lock upon the first request switch

䊊

press.

∙ The request switch can be deacti-

vated when the “I-Key Door Lock” is
switched to OFF in the Vehicle Set-
tings of the vehicle information dis-
play. For additional information, refer
to “Vehicle information display” in the
“Instruments and controls” section of
this manual.

LPD2918

LPD2579

Pre-driving checks and adjustments

3-15

If a door handle is pulled while unlocking
the doors, that door may not be unlocked.
Returning the door handle to its original
position will unlock the door. If the door
does not unlock after returning the door
handle, push the door handle request
switch to unlock the door.

All doors will be locked automatically un-
less one of the following operations is per-
formed within one minute after pushing
the request switch.

∙ Opening any door.

∙ Pushing the ignition switch.

The interior light timer illuminates for a pe-
riod of time when a door is unlocked and
the room light switch is in the DOOR posi-
tion.

The interior light can be turned off without
waiting by performing one of the following
operations:

∙ Placing the ignition switch in the ON po-

sition.

∙ Locking the doors and tailgate lock (if so

equipped) with the remote control.

∙ Switching the room light switch to the

OFF position.

∙ Switching the “Auto Room Lamp” to the

OFF position in Vehicle Settings of the
vehicle information display. For addi-
tional information, refer to “Vehicle in-
formation display” in the “Instruments
and controls” section of this manual.

HOW TO USE THE REMOTE
KEYLESS ENTRY FUNCTION

The remote keyless entry function can op-
erate all door locks using the remote key-
less function of the Intelligent Key. The re-
mote keyless function can operate at a
distance of 33 ft (10 m) away from the ve-
hicle. The operating distance depends
upon the conditions around the vehicle.

The remote keyless entry function will not
function under the following conditions:

∙ When the Intelligent Key is not within the

operational range.

∙ When the Intelligent Key battery is dis-

charged.

∙ When the doors are open or not closed

securely.

CAUTION

When locking the doors using the Intel-
ligent Key, be sure not to leave the key in
the vehicle.

3-16

Pre-driving checks and adjustments

Locking doors

1. Place the ignition switch in the LOCK

position.

2. Close all doors and tailgate.

3. Press the

button on the Intelli-

gent Key.

4. The hazard indicator lights flash twice,

the horn beeps once, and the front and
tail lights may turn on for 10 seconds.

5. All doors and tailgate lock (if so

equipped) will be locked.

CAUTION

After locking the doors using the Intel-
ligent Key, be sure that the doors have
been securely locked by operating the
door handles.

Unlocking doors

1. Press the

button on the Intelligent

Key.

2. The driver’s door will unlock, the hazard

indicator light flash once, and the front
and tail lights may turn on for 30 sec-
onds.

3. Press the

button again within

one minute.

4. The remaining doors and tailgate lock

(if so equipped) will unlock.

LPD2906

LPD2833

Pre-driving checks and adjustments

3-17

NOTE:

If Selective Unlock is turned off in the
Vehicle Settings, all doors and tailgate
lock (if so equipped) will unlock upon the
first

press of the Intelligent Key re-

mote. For additional information, refer to
“Vehicle information display” in the “In-
struments and controls” section of this
manual.
All doors and tailgate lock (if so equipped)
will be locked automatically unless one of
the following operations is performed
within one minute after pressing the
button:

∙ Opening any doors.

∙ Pushing the ignition switch.

The interior light illuminates for a period of
time when a door is unlocked and the
room light switch is in the DOOR position.

The light can be turned off without waiting
by performing one of the following opera-
tions:

∙ Placing the ignition switch in the ON po-

sition.

∙ Locking the doors with the Intelligent

Key.

∙ Switching the room light switch to the

OFF position.

∙ Switching the Auto Room Lamp to the

Opening windows (if so equipped)

The Intelligent Key allows you to simultane-
ously open windows equipped with auto-
matic operation.

∙ To open the windows, press the

button on the Intelligent Key for longer
than 3 seconds after all doors are un-
locked.

The door windows will open while pressing
the

button on the Intelligent Key.

The door windows cannot be closed by
using the Intelligent Key.

Using the panic alarm

If you are near your vehicle and feel threat-
ened, you may activate the panic alarm to
call attention by pressing and holding
the

button on the Intelligent Key for

longer than 1 second.
The panic alarm and headlights will stay on
for a period of time.

The panic alarm stops when:

∙ It has run for a period of time, or

∙ Any button is pressed on the Intelligent

Key.

WPD0374

3-18

Pre-driving checks and adjustments

Nissan Titan (2019 year). Instruction - part 13