Nissan Rogue Select (2015 year). Instruction

OFF position

When the switch is in the OFF position

, the

map lights will not illuminate, regardless of the
condition.

SIC3513

CEILING LIGHT

The ceiling light switch has three positions: ON,
DOOR and OFF.

ON position

When the switch is in the ON position

, the

ceiling light will illuminate.

DOOR position

When the switch is in the DOOR position

the ceiling light will illuminate under the following
conditions:
. ignition switch is turned to the LOCK

position

— remain on for about 15 seconds.

. doors are unlocked by pushing the unlock

button

(on the key fob), with the ignition

switch in the LOCK position
— remain on for about 15 seconds.

. any door is opened and then closed with the

ignition switch in the LOCK position
— remain on for about 15 seconds.

. any door is opened with the ignition switch

in the ACC or ON position
— remain on while the door is opened.

When the door is closed, the lights go
off.

The light will turn off after a period of time
when the lights remain illuminated to
prevent the battery from becoming dis-
charged.

OFF position

When the switch is in the OFF position

, the

ceiling light will not illuminate, regardless of the
condition.

Instruments and controls

2-43

2-44

Instruments and controls

SIC2064

The light on the vanity mirror will turn on when
the cover on the vanity mirror is opened.

When the cover is closed, the light will turn off.

The lights will turn off after a period of
time when the lights remain illuminated to
prevent the battery from becoming dis-
charged.

SIC2131A

When the switch is in the ON position

, the

light illuminates while the lift gate is opened.
When the lift gate is closed, the light will turn off.

When the switch is in the OFF position

, the

light will turn off.

The light will turn off after a period of time
when the lights remain illuminated to
prevent the battery from becoming dis-
charged.

VANITY MIRROR LIGHTS (if so
equipped)

CARGO LIGHT

3-2

Pre-driving checks and adjustments

A key number plate is supplied with your keys.
Record the key number and keep it in a safe
place (such as your wallet), not in the vehicle. If
you lose your keys, see a NISSAN dealer for
duplicates by using the key number. NISSAN
does not record any key numbers so it is very
important to keep track of your key number plate.

A key number is only necessary when you have
lost all keys and do not have one to duplicate
from. If you still have a key, this key can be
duplicated by a NISSAN dealer.

SPA2405

Master key (2)

Key number plate (1)

NISSAN VEHICLE IMMOBILIZER SYS-
TEM KEYS

Your vehicle can only be driven with the master
keys which are registered to the NISSAN
Vehicle Immobilizer System components in your
vehicle. These keys have a transponder chip in
the key head.

Never leave these keys in the vehicle.

Additional or replacement keys:

If you still have a key, the key number is not
necessary when you need extra NISSAN Vehicle
Immobilizer System keys. Your dealer can

duplicate your existing key. As many as 5 keys
can be used with one vehicle. You should bring
all the registered keys that you have to a
NISSAN dealer for registration. This is because
the registration process will erase the memory of
all key codes previously registered into the
NISSAN Vehicle Immobilizer System. After the
registration process, these components will only
recognize keys coded into the NISSAN Vehicle
Immobilizer System during registration. Any key
that is not given to your dealer at the time of
registration will no longer be able to start your
vehicle.

CAUTION

Do not allow the NISSAN Vehicle Im-
mobilizer System key, which contains
an electrical transponder, to come in
contact with salt water. This could
cause the system to malfunction.

KEYS

WARNING

. Always have the doors locked while

driving. Along with the use of seat
belts, this provides greater safety in
the event of an accident by helping
to prevent persons from being
thrown from the vehicle. This also
helps keep children and others from
unintentionally opening the doors,
and will help keep out intruders.

. Before opening any door, always

look for and avoid oncoming traffic.

. Do not leave children unattended

inside the vehicle. They could un-
knowingly activate switches or con-
trols. Unattended children could
become involved in serious acci-
dents.

JVP0366X

LOCKING WITH KEY

The power door lock system allows you to lock
or unlock all doors simultaneously.
. Turning the driver’s door key cylinder to the

front of the vehicle

will lock all doors and

the lift gate.

. Turning the driver’s door key cylinder once

to the rear of the vehicle

will unlock the

driver’s door. After returning the key to the
neutral position, turning it to the rear again
within 5 seconds will unlock all doors and
the lift gate.

SPA1814

LOCKING WITH INSIDE LOCK KNOB

To lock the door without the key, move the inside
lock knob to the lock position

then close the

door.

To unlock, move the inside lock knob to the
unlock position

When locking the door without a key, be
sure not to leave the key inside the vehicle.

Pre-driving checks and adjustments

3-3

DOORS

3-4

Pre-driving checks and adjustments

SPA2300

LOCKING WITH POWER DOOR LOCK
SWITCH

Operating the power door lock switch will lock
or unlock all the doors. The switches are located
on the driver’s and front passenger’s door
armrests.

To lock the doors, push the power door lock
switch to the lock position

with the driver’s

or front passenger’s door open, then close the
door.

When locking the door this way, be sure
not to leave the key inside the vehicle.

To unlock the doors, push the power door lock
switch to the unlock position

Lockout protection

When the power door lock switch (driver or front
passenger) is moved to the lock position with
the key in the ignition switch and any door open,
all doors will lock and unlock automatically.

This function helps to prevent the keys from
being accidentally locked inside the vehicle.

AUTOMATIC DOOR LOCKS

. All doors lock automatically when the vehicle

speed reaches 15 MPH (24 km/h).

. All doors unlock automatically when the

ignition switch is placed in the OFF position
or when the key is removed from the ignition
switch.

The automatic unlock function can be
deactivated or activated. To deactivate or
activate the automatic door unlock system,
perform the following procedure:

1. Close all doors.

2. Place the ignition switch in the ON position.

3. Within 20 seconds of performing Step 2,

push and hold the power door lock switch to
the

position (UNLOCK) for more than 5

seconds.

4. When activated, the hazard indicator will

flash twice. When deactivated, the hazard
indicator will flash once.

5. The ignition switch must be placed in the

OFF and ON position again between each
setting change.

When the automatic door unlock system is
deactivated, the doors do not unlock when the
ignition switch is placed in the OFF position. To
unlock the door manually, use the inside lock
knob or the power door lock switch (driver’s or
front passenger’s side).

SPA2037

CHILD SAFETY REAR DOOR LOCK

Child safety rear door locks help prevent the rear
doors from being opened accidentally, espe-
cially when small children are in the vehicle.

When the levers are in the lock position

, the rear doors can be opened only

from the outside.

To disengage, move the levers to the unlock
position

It is possible to lock/unlock all doors (including
the lift gate), and activate the panic alarm by
using the key fob from outside the vehicle.

Before locking the doors, make sure the
key is not left in the vehicle.

The key fob can operate at a distance of
approximately 33 ft (10 m) from the vehicle.
(The effective distance depends upon the
conditions around the vehicle.)

As many as 5 key fobs can be used with one
vehicle. For information concerning the pur-
chase and use of additional key fobs, contact a
NISSAN dealer.

The key fob will not function:
. When the key fob is not within the opera-

tional range.

. When the doors are open or not closed

securely.

. When the key is in the ignition switch.
. When the battery is discharged.

WARNING

The remote keyless entry key fob trans-
mits radio waves when the buttons are
pushed. The FAA advises that the radio
waves may affect aircraft navigation
and communication systems. Do not

operate the key fob while on an air-
plane. Make sure the buttons are not
operated unintentionally when the unit
is stored during a flight.

CAUTION

The following conditions or occur-
rences will damage the key fob.

. Do not allow the key fob to become

wet.

. Do not drop the key fob.
. Do not strike the key fob sharply

against another object.

. If the outside temperature is below

8F (-108C) degrees, the battery of

key fob may not function properly.

. Do not place the key fob for an

extended period in an area where
temperatures exceed 140

8F (608C).

If a key fob is lost or stolen, NISSAN
recommends erasing the ID code of that
key fob. This will prevent the key fob
from unauthorized use to unlock the
vehicle. For information regarding the
erasing procedure, please contact a

Pre-driving checks and adjustments

3-5

REMOTE KEYLESS ENTRY SYSTEM

3-6

Pre-driving checks and adjustments

NISSAN dealer.

For information regarding the replacement of a
battery, see “Battery replacement” (P.8-22).

JVP0275X

LOCK button

UNLOCK button

PANIC button

Battery indicator light

HOW TO USE REMOTE KEYLESS
ENTRY SYSTEM

Locking doors

1. Remove the key from the ignition switch.

2. Close all the doors.

3. Push the LOCK

button

on the key

fob.

4. All the doors will lock.

All of the doors will lock when the LOCK

button is pushed even though a door

remains open.

5. The hazard indicator flashes twice and the

horn chirps once.

. When the LOCK

button is pushed with

all doors locked, the hazard indicator flashes
twice and the horn chirps once as a
reminder that the doors are already locked.

. Operate the door handles to confirm that the

doors have been securely locked.

Unlocking doors

1. Push the UNLOCK

button

on the

key fob.

The driver’s door unlocks.

The hazard indicator flashes once if all

doors are completely closed.

2. Push the UNLOCK

button again within

5 seconds.

All the doors and the lift gate unlock.

The hazard indicator flashes once if all

doors are completely closed.

All doors will be locked automatically unless one
of the following operations is performed within 1
minute of pushing the UNLOCK

button.

. Any door or lift gate is opened.
. The ignition switch is turned to the ON

position.

Using panic alarm

If you are near your vehicle and feel threatened,
you may activate the alarm to call attention as
follows:

1. Push the PANIC

button

on the key

fob for more than 1 second.

2. The theft warning alarm and headlights will

stay on for 25 seconds.

3. The panic alarm stops when:

It has run for 25 seconds, or

Any of the buttons on the key fob is

pushed. (Note: the PANIC button must
be pushed for more than 1 second.)

Battery indicator light

The battery indicator light

illuminates when

you push any button. If the light does not
illuminate, the battery is weak or needs replace-
ment. For information regarding replacement of
a battery, see “Battery replacement” (P.8-22).

Setting hazard indicator and horn mode

This vehicle is set in hazard indicator and horn
mode when you first receive the vehicle.

In hazard indicator and horn mode, when the
LOCK

button

is pushed, the hazard

indicator flashes twice and the horn chirps once.
When the UNLOCK

button

is pushed,

the hazard indicator flashes once.

If the horn chirp is not necessary, you can switch
to hazard indicator only mode by following the
switching procedure.

In hazard indicator only mode, when the LOCK

button is pushed, the hazard indicator

flashes twice. When the UNLOCK

button

is pushed, neither the hazard indicator nor the
horn operates.

Pre-driving checks and adjustments

3-7

3-8

Pre-driving checks and adjustments

Mode (Pushing the

button)

DOOR LOCK

DOOR UNLOCK

Hazard indicator and horn mode

HAZARD - twice
HORN - once

HAZARD - once
HORN - none

Hazard indicator mode

HAZARD - twice

HAZARD - none

Switching procedure:

To switch the hazard indicator and horn opera-
tion, push the LOCK

and UNLOCK

buttons on the key fob simultaneously

for more than 2 seconds.
. When the hazard indicator mode is set, the

hazard indicator flashes 3 times.

. When the hazard indicator and horn mode is

set, the hazard indicator flashes once and
the horn chirps once.

WARNING

. Make sure the hood is completely

closed and latched before driving.
Failure to do so could cause the
hood to fly open and result in an
accident.

. If you see steam or smoke coming

from the engine compartment, to
avoid injury do not open the hood.

SPA2412

When opening the hood:

1. Pull the hood release handle

located

below the instrument panel; the hood will
then spring up slightly.

2. Pull the lever

up at the front of the hood

with your fingertips.

3. Raise the hood.

4. Remove the support rod from the hood and

insert it into the slot

Hold the coated part

when removing or

resetting the support rod. Avoid direct
contact with the metal parts, as they may
be hot immediately after the engine has
been stopped.

When closing the hood:

1. While supporting the hood, retune the

support rod to its original position.

2. Slowly lower the hood to about 8 to 12 in

(20 to 30cm) above the hood lock, then let it
drop.

3. Make sure it is securely latched.

Pre-driving checks and adjustments

3-9

HOOD

3-10

Pre-driving checks and adjustments

WARNING

. Always be sure the lift gate has

been closed securely to prevent it
from opening while driving.

. Do not drive with the lift gate open.

This could allow dangerous exhaust
gases to be drawn into the vehicle.
See “Exhaust gas (carbon monox-
ide)” (P.5-2) of this manual.

. Make sure that all passengers have

their hands, etc. inside the vehicle
before closing the lift gate.

SPA2413

To open the lift gate, unlock it and push the
opener switch

. Pull up the lift gate to open.

The lift gate can be unlocked by:
. pushing the unlock button

on the key

fob twice.

. pushing the power door lock switch to the

unlock position.

. inserting the key into the driver’s door key

cylinder and turning it to the rear of the
vehicle twice.

To close the lift gate, pull down until it securely
locks.

SPA2414

LIFT GATE RELEASE

If the lift gate cannot be opened due to a
discharged battery, follow these steps.

1. Remove the cover inside of the lift gate with

a suitable tool.

2. Move the lever toward the direction

illustrated to open the lift gate.

Have the vehicle checked by a NISSAN dealer.

LIFT GATE

SPA2415

OPENING THE FUEL-FILLER DOOR

To open the fuel-filler door, pull the left side of
the door.

SPA2338

FUEL-FILLER CAP

To remove the fuel-filler cap:

1. Turn the fuel-filler cap counterclockwise to

remove.

2. Put the fuel-filler cap on the cap holder

while refueling.

To install the fuel-filler cap:

1. Insert the fuel-filler cap straight into the fuel-

filler tube.

2. Turn the fuel-filler cap clockwise until a

single click is heard.

WARNING

. Gasoline is extremely flammable

and highly explosive under certain
conditions. You could be burned or
seriously injured if it is misused or
mishandled. Always stop engine
and do not smoke or allow open
flames or sparks near the vehicle
when refueling.

. Do not attempt to top off the fuel

tank after the fuel pump nozzle
shuts off automatically. Continued
refueling may cause fuel overflow,
resulting in fuel spray and possibly
a fire.

. Use only an original equipment type

fuel-filler cap as a replacement. It
has a built-in safety valve needed
for proper operation of the fuel
system and emission control sys-
tem. An incorrect cap can result in a
serious malfunction and possible
injury. It could also cause the mal-
function indicator light to come on.

. Never pour fuel into the throttle

body to attempt to start your vehi-
cle.

Pre-driving checks and adjustments

3-11

FUEL-FILLER DOOR

3-12

Pre-driving checks and adjustments

. Do not fill a portable fuel container

in the vehicle or trailer. Static elec-
tricity can cause an explosion of
flammable liquid, vapor or gas in
any vehicle or trailer. To reduce the
risk of serious injury or death when
filling portable fuel containers:

— Always place the container on

the ground when filling.

— Do not use electronic devices

when filling.

— Keep the pump nozzle in contact

with the container while you are
filling it.

— Use only approved portable fuel

containers for flammable liquid.

CAUTION

. If fuel is spilled on the vehicle body,

flush it away with water to avoid
paint damage.

. Insert the cap straight into the fuel-

filler tube, then tighten until the
fuel-filler cap clicks. Failure to tight-
en the fuel-filler cap properly may

cause the

malfunction indicator

light (MIL) to illuminate. If the
light illuminates because the fuel-
filler cap is loose or missing, tighten
or install the cap and continue to
drive the vehicle. The

light

should turn off after a few driving
trips. If the

light does not turn

off after a few driving trips, have the
vehicle inspected by a NISSAN deal-
er.

For additional information, see
“Malfunction Indicator Light (MIL)”
(P.2-15).

. The LOOSE FUEL CAP warning will

appear if the fuel-filler cap is not
properly tightened. It may take a few
driving trips for the message to be
displayed. Failure to tighten the
fuel-filler cap properly after the
LOOSE FUEL CAP warning appears
may cause the Malfunction Indicator
Light (MIL) to illuminate.

SPA2807

LOOSE FUEL CAP warning

The LOOSE FUEL CAP warning appears on the
vehicle information display when the fuel-filler
cap is not tightened correctly after the vehicle
has been refueled. It may take a few driving trips
for the message to be displayed. To turn off the
warning, perform the following steps:

1. Remove and install the fuel-filler cap as soon

as possible. (See “FUEL-FILLER CAP”.)

2. Tighten the fuel-filler cap until it clicks.

3. Push the

switch

for about 1

second to turn off the LOOSE FUEL CAP
warning after tightening the fuel cap.

WARNING

Do not adjust the steering wheel while
driving. You could lose control of your
vehicle and cause an accident.

SPA2383

TILT OPERATION

Pull the lock lever down

and adjust the

steering wheel up or down

to the desired

position.

Push the lock lever up

securely to lock the

steering wheel in place. A clicking noise may be
heard when the lever is moved to the lock
position.

SIC2872

1. To block out glare from the front, swing

down the sun visor

2. To block glare from the side, remove the sun

visor from the center mount and swing it to
the side

Pre-driving checks and adjustments

3-13

STEERING WHEEL

SUN VISORS

3-14

Pre-driving checks and adjustments

SPA2447

INSIDE MIRROR

Adjust the height and the angle of the inside
mirror to the desired position.

SPA2143

Manual anti-glare type

The night position

will reduce glare from the

headlights of vehicles behind you at night.

Use the day position

when driving in daylight

hours.

WARNING

Use the night position only when ne-
cessary, because it reduces rear view
clarity.

SPA1390

OUTSIDE MIRRORS

WARNING

Objects viewed in the outside mirror on
the passenger side are closer than they
appear. Be careful when moving to the
right. Using only this mirror could cause
an accident. Use the inside mirror or
glance over your shoulder to properly
judge distances to other objects.

MIRRORS

Nissan Rogue Select (2015 year). Instruction - part 8