Nissan Pathfinder (2018 year). Instruction

— go back to the previous menu

The ENTER and

buttons also control

audio and control panel functions. For ad-
ditional information, refer to the separate
NissanConnect

Owner’s Manual.

STARTUP DISPLAY

When the vehicle in placed in the ON or ACC
position the screens that display in the ve-
hicle information include:

∙ Active system status (if so equipped)

∙ Trip computer

∙ Tire pressure information

∙ 4WD (if so equipped)

∙ Fuel economy

∙ Distance to empty

∙ Warnings

Warnings will only display if there are any
present. For additional information on
warnings and indicators refer to “Vehicle
information display warnings and indica-
tors” in this section.

To control what items display in the vehicle
information display, refer to “Main menu se-
lection” in this section.

RESETTING THE TRIP COMPUTER

1. Press the

button until you reach

the trip computer mode.

2. Press the

button again for more

than 1.5 seconds to reset average fuel
consumption, average speed, distance
to empty, and journey time.

SETTINGS

The setting mode allows you to change the
information displayed in the vehicle infor-
mation display:

∙ Driver Assistance (if so equipped)

∙ Vehicle Settings

∙ Main Menu Selection

∙ Body Color

∙ Maintenance

∙ Alarms

∙ Language

∙ Units

∙ Welcome Effect

∙ Factory Reset

Instruments and controls

2-21

Driver Assistance (if so equipped)

The driver assistance menu allows the user
to change the various driving aids, parking
aids and braking features.

Menu item

Result

Driving Aids (if so equipped)

Displays available driving aids.

Blind Spot

Allows user to turn Blind Spot Warning (BSW) and Rear Cross Traffic Alert (RCTA) systems on or off. For additional
information, refer to “Blind Spot Warning (BSW)” and “Rear Cross Traffic Alert (RCTA)” in the “Starting and driving”
section of this manual.

Parking Aids (if so equipped)

Displays available parking aids.

Sensor

Allows user to turn the parking sensor on or off.

Display

Allows user to turn the parking sensor display on or off.

Volume

Allows user to change the volume of the parking aid chimes.

Range

Allows user to select the range in which the parking sensors will activate.

Emergency Braking (if so equipped)

Displays the available emergency braking options.

System

Allows user to turn the emergency braking system on or off.

Vehicle Settings

The vehicle settings menu allows the user
to change the settings for lights, wipers,
locking, keys, and other vehicle settings.

Menu item

Result

Rear Door Alert

Displays the available rear door alert options.

Off

When selected, no alert or horn will be active.

Alert & Horn

When selected, the alert is displayed; and the horn sounds.

Alert Only

When selected, only the alert is displayed.

Welcome Light

Allows user to turn the welcome light on or off.

Auto Room Lamp

Allows user to turn the auto room lamp on or off.

2-22

Instruments and controls

Menu item

Result

Light Sensitivity

Allows user to change when the lights illuminate based on the brightness outside the vehicle.

Light Off Delay

Allows user to change the duration of time that the automatic headlights stay on after the vehicle is shut off.

Wiper with Speed (if so equipped)

Allows user to turn the wiper with speed feature on or off.

I-Key Door Lock

Allows user to turn I-key door lock on or off. When turned on, the request switch on the door is activated.

Selective Unlock

Allows user to turn selective unlock feature on or off. When this item is turned on, only the driver’s door is
unlocked first after the door unlock operation. When the door handle request switch on the driver’s or front
passenger’s side door is pushed to be unlocked, only the corresponding door is unlocked first. All the doors can
be unlocked if the door unlock operation is performed again within 1 minute. When this item is turned off, all the
doors will be unlocked after the door unlock operation is performed once.

Auto Door Unlock

Displays the available auto door unlock options.

OFF

Doors will have to be manually unlocked.

IGN Off

Doors will unlock when the ignition is turned off.

Shift into P

Doors will unlock when the vehicle is shifted into P (Park).

Answer Back Horn

Allows user to turn the answer back horn feature on or off.

Remote Start (if so equipped)

Allows user to turn the remote engine start feature on or off. When turned off, the vehicle cannot be started
remotely.

Battery Saver

Allows user to turn the battery saver feature on or off.

Exit Seat Slide (if so equipped)

When the exit seat slide is on the driver’s seat will move backward for easy exit when the ignition switch is placed
in the OFF position and the driver’s door is opened. After getting into the vehicle and placing the ignition switch in
the ACC position, the driver’s seat will move to the previous set position.
For additional information, refer to “Automatic drive positioner” in the “Pre-driving checks and adjustments”
section of this manual.

Exit Steering Up (if so equipped)

When the exit steering up feature is turned on, the steering wheel moves upward for easy exit when the ignition
switch is in the OFF position and the driver’s door is opened. After getting into the vehicle and placing the ignition
switch in the ACC position, the steering wheel moves to the previous position.
For additional information, refer to “Automatic drive positioner” in the “Pre-driving checks and adjustments”
section of this manual.

Instruments and controls

2-23

Main Menu Selection

The main menu selection menu allows the
user to customize the information that ap-
pears in the vehicle information display when
the ignition is placed in the ON position.

Menu item

Result

Driver Assistance (if so equipped)

Allows user to turn the driver assistance display on or off.

Trip Computer

Allows user to turn the trip computer display on or off.

Tire Pressures

Allows user to turn the tire pressures display on or off.

4WD (if so equipped)

Allows user to turn the 4WD display on or off.

Audio

Allows user to turn the audio display on or off.

Navigation (if so equipped)

Allows user to turn the navigation display on or off.

Fuel Economy

Allows user to turn the fuel economy display on or off.

Body Color

The body color menu allows the user to
select the color of vehicle that appears in
the vehicle information display.

Menu item

Result

Body Color

Displays the available colors for the vehicle in the vehicle information display.

2-24

Instruments and controls

Maintenance

The maintenance menu allows the user to
set reminders for various vehicle mainte-
nance items.

WARNING

The tire replacement indicator is not a
substitute for regular tire checks, in-
cluding tire pressure checks. For addi-
tional information, refer to “Changing
wheels and tires” in the “Do-it-yourself ”
section of this manual. Many factors in-
cluding tire inflation, alignment, driving
habits and road conditions affect tire
wear and when tires should be re-
placed. Setting the tire replacement in-
dicator for a certain driving distance

does not mean your tires will last that
long. Use the tire replacement indicator
as a guide only and always perform
regular tire checks. Failure to perform
regular tire checks, including tire pres-
sure checks could result in tire failure.
Serious vehicle damage could occur
and may lead to a collision, which could
result in serious personal injury or
death.

Menu item

Result

Service

This indicator appears when the customer set distance is reached for checking or replacing maintenance items other
than the engine oil, oil filter and tires. Other maintenance items can include such things as air filter or tire rotation. You
can set or reset the distance for checking or replacing the items. You can set or reset the distance for service type items.
For scheduled maintenance items and intervals, refer to the “Maintenance and schedules” section of this manual.

Tire

This indicator appears when the customer set distance is reached for replacing tires. You can set or reset the distance for
replacing tires.

Other

Instruments and controls

2-25

Alarms

The alarms menu allows the user to set
various alerts.

Menu item

Result

Outside Temp.

Allows user to turn the outside temp. alarm on or off.

Timer Alert

Allows user to set the timer alert for a specific interval.

Language

The language menu allows the user to
change the languages displayed in the ve-
hicle information display.

Menu item

Result

Language

Displays available language options for the vehicle information display.

Unit

The unit menu allows the user to custom-
ize the information that appears in the ve-
hicle information display.

Menu item

Result

Mileage

Displays available mileage options shown in the vehicle information display.

Tire Pressures

Displays available tire pressures options shown in the vehicle information display.

Temperature

Displays available temperature options shown in the vehicle information display.

2-26

Instruments and controls

Welcome Effect

The welcome effect menu allows the user
to control the welcome effect feature.

Menu item

Result

Welcome Effect

Allows user to turn the welcome effect feature on or off.

Factory Reset

The factory reset menu allows the user to
restore the vehicle information display set-
tings to factory status.

Menu item

Result

Factory Reset

Allows user to reset the vehicle information display settings to the original factory settings. Once selected,
the user can confirm or deny the reset.

Instruments and controls

2-27

VEHICLE INFORMATION DISPLAY
WARNINGS AND INDICATORS

1. No Key Detected

2. Key ID Incorrect

3. Key low battery

4. I-Key System Error: See Owner’s

Manual

5. Key Registration Complete

6. Shift to Park

7. Push Ignition to OFF

8. Push brake and start switch to drive

9. Engine start operation for Intelligent

Key system (if I-Key battery is low)

10. Release Parking Brake

11. Low Fuel

12. Loose Fuel Cap

13. Low Oil Pressure: See Owner’s Manual

14. Low Washer Fluid

15. Tire Pressure Low - Add Air

16. TPMS Error: See Owner’s Manual

17. Intelligent 4x4 indicators (if so equipped)

18. 4WD Error: See Owner’s Manual

(if so equipped)

19. Door Open

20. Liftgate Open

21. Timer Alert – Have a break?

22. Low Outside Temperature

23. Power will turn off to save the battery

24. Power turned off to save the battery

25. Turn off the lights

26. Headlight System Error: See Owner’s

Manual (if so equipped)

27. Parking Sensor Error: See Owner’s

Manual (if so equipped)

28. Blind Spot Warning (BSW) and Rear

Cross Traffic Alert (RCTA) indicator
(if so equipped)

29. Malfunction: See Owner’s Manual

(if so equipped)

30. Side Radar Obstruction (if so equipped)

31. Cruise control indicator (if so equipped)

32. Intelligent Cruise Control (ICC)

indicator (if so equipped)

33. Shipping Mode On Push Storage Fuse

34. Transmission Shift Position indicator

35. CVT Error: See Owner’s Manual

36. Unavailable: Front Radar Obstruction

(if so equipped)

37. Rear Door Alert is activated

38. Check Back Seat For All Articles

39. Automatic Emergency Braking (AEB)

indicator light

No Key Detected

This warning appears when the Intelligent
Key is left outside the vehicle with the igni-
tion switch in the ON position. Make sure
the Intelligent Key is inside the vehicle.

For additional information, refer to “NISSAN
Intelligent Key®” in the “Pre-driving checks
and adjustments” section of this manual.

Key ID Incorrect

This warning appears when the ignition
switch is placed from the OFF position and
the Intelligent Key is not recognized by the
system. You cannot start the engine with
an unregistered key.

For additional information, refer to “NISSAN
Intelligent Key®” in the “Pre-driving checks
and adjustments” section of this manual.

Instruments and controls

2-29

Key low battery

This indicator illuminates when the Intelli-
gent Key battery is running out of power.

If this indicator illuminates, replace the bat-
tery with a new one. For additional infor-
mation, refer to “Battery replacement” in
the “Do-it-yourself ” section of this manual.

I-Key System Error: See Owner’s Manual

After the ignition switch is pushed to the
ON position, this light comes on for a period
of time and then turns off.

The I-Key System Error message warns of
a malfunction with the Intelligent Key sys-
tem. If the light comes on while the engine
is stopped, it may be impossible to start
the engine.

If the light comes on while the engine is
running, you can drive the vehicle. However,
in these cases, have the system checked. It
is recommended that you visit a NISSAN
dealer for this service.

Key Registration Complete

This appears when a new Intelligent Key is
registered to the vehicle.

Shift to Park

This warning illuminates when the ignition
switch is in the ACC or OFF position and the
shift lever is not in the P (Park) position. Also,
a chime sounds when the ignition switch is
in the ACC or OFF position.

If this warning illuminates, move the shift
lever to the P (Park) position and start the
engine.

Push Ignition to OFF

After the Push Ignition to OFF warning illu-
minates, the warning will illuminate if the
ignition switch is placed in the ACC position
when the shift lever is moved to the P (Park)
position.

To turn off the Push warning, place the ig-
nition switch in the ON position and then in
the LOCK position.

Push brake and start switch to drive

This indicator appears when the shift lever
is in the P (Park) position.

This indicator also appears when the ve-
hicle has been started using the remote
engine start (if so equipped) function.

This indicator means that the engine will
start by pushing the ignition switch with
the brake pedal depressed. You can start
the engine from any position of the ignition
switch.

Engine start operation for Intelligent
Key system (if I-Key battery level is low)

This indicator appears when the battery of
the Intelligent Key is low and when the In-
telligent Key system and the vehicle are not
communicating normally.

If this appears, touch the ignition switch
with the Intelligent Key while depressing
the brake pedal. For additional information,
refer to “NISSAN Intelligent Key® battery dis-
charge” in the “Starting and driving” section
of this manual.

Release Parking Brake

This warning illuminates in the message
area of the vehicle information display
when the parking brake is set and the ve-
hicle is driven.

2-30

Instruments and controls

Low Fuel

This warning illuminates when the fuel level
in the fuel tank is getting low. Refuel as
soon as it is convenient, preferably before
the fuel gauge reaches 0 (Empty). There
will be a small reserve of fuel in the tank
when the fuel gauge needle reaches 0
(Empty).

Loose Fuel Cap

This warning appears when the fuel-filler
cap is not tightened correctly after the ve-
hicle has been refueled. For additional in-
formation, refer to “Fuel-filler cap” in the
“Pre-driving checks and adjustments” sec-
tion of this manual.

Low Oil Pressure: See Owner’s Manual

This warning appears in the message area
of the vehicle information display if low oil
pressure is detected. This gauge is not de-
signed to indicate low oil level. The low oil
pressure warning is not designed to indi-
cate a low oil level. Use the dipstick to
check the oil level. For additional informa-
tion, refer to “Engine oil” in the “Do-it-
yourself ” section of this manual.

Low Washer Fluid

This

warning

illuminates

when

the

windshield-washer fluid is at a low level.
Add windshield-washer fluid as necessary.
For

additional

information,

refer

“Windshield-washer fluid” in the “Do-it-
yourself ” section of this manual.

Tire Pressure Low - Add Air

This warning appears when the low tire
pressure warning light in the meter illumi-
nates and low tire pressure is detected. The
warning appears each time the ignition
switch is placed in the ON position as long
as the low tire pressure warning light re-
mains illuminated. If this warning appears,
stop the vehicle and adjust the tire pres-
sures of all four tires to the recommended
COLD tire pressure shown on the Tire and
Loading Information label. For additional
information, refer to “Low tire pressure
warning light” in this section and “Tire Pres-
sure Monitoring System (TPMS)” in the
“Starting

and

driving”

section

this

manual.

TPMS Error: See Owner’s Manual

This warning appears when there is an er-
ror with your TPMS. If this warning comes
on, have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

Intelligent 4x4 indicators
(if so equipped)

These indicators show the Intelligent 4x4
system status while the engine is running.

For additional information, refer to “Intelli-
gent 4x4 (I-4x4)” in the “Starting and driving”
section of this manual.

4WD Error: See Owner’s Manual
(if so equipped)

This warning appears when the 4-wheel
drive system is not functioning properly.
For additional information, refer to “Intelli-
gent 4x4 (I-4x4)” in the “Starting and driving”
section of this manual.

Door Open

This warning illuminates when a door has
been opened.

Liftgate Open

This warning illuminates when the liftgate
has been opened.

Instruments and controls

2-31

Timer Alert — Have a break?

This indicator appears when the set time is
reached. The time can be set up to six
hours. For additional information, refer to
“Settings” in this section.

Low Outside Temperature

This warning appears if the outside tem-
perature is below 37°F (3°C). The tempera-
ture can be changed to display in Celsius or
Fahrenheit. For additional information, re-
fer to “Settings” in this section.

Power will turn off to save the battery

This message appears in the vehicle infor-
mation display after a period of time if the
ignition switch is in the ACC or the ON po-
sition and if the vehicle is in P (Park). For
additional information, refer to “Push-
button ignition switch positions” in the
“Starting

and

driving”

section

this

manual.

Power turned off to save the battery

This message appears after the ignition
switch is automatically turned off. For addi-
tional information, refer to “Push-button ig-
nition switch positions” in the “Starting and
driving” section of this manual.

Turn off the lights

This warning appears when the headlights
are left in the ON position when exiting the
vehicle. Place the headlight switch to OFF
or AUTO position. For additional informa-
tion, refer to “Headlight and turn signal
switch” in this section.

Headlight System Error: See Owner’s
Manual (if so equipped)

This warning illuminates when there is an
error with the system. For additional infor-
mation, refer to “Headlight and turn signal
switch” in this section.

Parking Sensor Error: See Owner’s
Manual (if so equipped)

This warning illuminates when there is an
error with the system. For additional infor-
mation, refer to “Rear Sonar System (RSS)”
in the “Starting and driving” section of this
manual.

Blind Spot Warning (BSW) and
Rear Cross Traffic Alert (RCTA) indicator
(if so equipped)

This indicator shows when the BSW and
RCTA systems are engaged.

For additional information, refer to “Blind
Spot Warning (BSW)” and “Rear Cross Traffic

Alert (RCTA)” in the “Starting and driving”
section of this manual.

Malfunction: See Owner’s Manual
(if so equipped)

This warning appears when one or more of
the following systems (if so equipped) is
not functioning properly:

∙ Blind Spot Warning (BSW)

∙ Rear Cross Traffic Alert (RCTA)

If one or more of these warning appears,
have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

Side Radar Obstruction (if so equipped)

This message appears when the Blind
Spot Warning (BSW) or Rear Cross Traffic
Alert (RCTA) systems become unavailable
because a radar blockage is detected. For
additional information, refer to “Blind Spot
Warning (BSW)” or “Rear Cross Traffic Alert
(RCTA)” in the “Starting and driving” section
of this manual.

Cruise control indicator (if so equipped)

This indicator shows the cruise control sys-
tem status.

2-32

Instruments and controls

When cruise control is activated, a green
circle will illuminate to indicate it is set. The
vehicle information display will also display
the speed the cruise control was set at. If
you accelerate past the set speed, the
speed will blink until you either cancel
cruise control or go back to the set speed. If
cruise control is on and canceled, the
speed will be displayed to show the speed
the vehicle will return to if the resume but-
ton is activated.

Intelligent Cruise Control (ICC) indicator
(if so equipped)

This indicator shows the Intelligent Cruise
Control (ICC) system status. The status is
shown by the color. For additional informa-
tion, refer to “Intelligent Cruise Control (ICC)”
in the “Starting and driving” section of this
manual.

Shipping Mode On Push Storage Fuse

This warning may appear if the extended
storage switch is not pushed in. When this
warning appears, push in the extended
storage switch to turn off the warning. For
additional information, refer to “Extended
storage switch” in this section.

Transmission Shift Position indicator

This indicator shows the transmission shift
position.

CVT Error: See Owner’s Manual

This warning illuminates when there is a
problem with the CVT system. If this warn-
ing comes on, have the system checked. It
is recommended that you visit a NISSAN
dealer for this service.

Unavailable: Front Radar Obstruction
(if so equipped)

This warning appears when the Intelligent
Cruise Control (ICC) system becomes un-
available because the front radar is ob-
structed. For additional information, refer
to “Intelligent Cruise Control (ICC)” or “Auto-
matic Emergency Braking ” in the “Starting
and driving” section of this manual.

Rear Door Alert is activated
(if so equipped)

When the system is enabled, this message
appears when the rear door alert system is
active and can remind the driver to check
the back seat.

∙ Using the steering wheel switch, a driver

can select “Dismiss Message” to clear
the display for a period of time. If no
selection is made, this message auto-
matically turns off after a period of time.

∙ Using the steering wheel switch, a driver

can select “Disable Alert” to disable the
horn alert for the remainder of the cur-
rent trip.

WARNING

Selecting “Dismiss Message” during a
stop within a trip temporarily dismisses
the message for that stop without turn-
ing the system off. Alerts* can be pro-
vided for other stops during the trip. Se-
lecting “Disable Alert” turns off the Rear
Door Alert system for the remainder of
a trip and no audible alert will be
provided.

NOTE:

This system is disabled until a driver en-
ables it using the vehicle information
display. For additional information, refer
to “How to use the vehicle information
display” in this section.

For additional information, refer to “Rear
Door Alert” in this section.

Instruments and controls

2-33

Check Back Seat For All Articles
(if so equipped)

When the system is enabled, this message
appears when the vehicle comes to a com-
plete stop, the vehicle is transitioned from
the D (Drive) position to P (Park) position,
and the driver exits the vehicle. This mes-
sage alerts the driver, after a period of time,
to check for items in the rear seat after the
audible alert has been provided.

NOTE:

This system is disabled until a driver en-
ables it using the vehicle information
display. For additional information, refer
to “How to use the vehicle information
display” in this section.

For additional information, refer to “Rear
Door Alert” in this section.

Automatic Emergency Braking (AEB)
indicator

This indicator shows when the AEB system
is engaged.

Your vehicle has two types of security sys-
tems:

∙ Vehicle security system

∙ NISSAN Vehicle Immobilizer System

VEHICLE SECURITY SYSTEM

The vehicle security system provides visual
and audible alarm signals if someone
opens the doors, liftgate, or hood when the
system is armed. It is not, however, a mo-
tion detection type system that activates
when a vehicle is moved or when a vibra-
tion occurs.

The system helps deter vehicle theft but
cannot prevent it, nor can it prevent the
theft of interior or exterior vehicle compo-
nents in all situations. Always secure your
vehicle even if parking for a brief period.
Never leave your Intelligent Key in the ve-
hicle, and always lock the vehicle when un-
attended. Be aware of your surroundings,
and park in secure, well-lit areas whenever
possible.

Many devices offering additional protec-
tion, such as component locks, identifica-
tion markers, and tracking systems, are
available at auto supply stores and spe-
cialty shops. A NISSAN dealer may also offer
such equipment. Check with your insur-
ance company to see if you may be eligible
for discounts for various theft protection
features.

How to arm the vehicle security
system

1. Close all windows. (The system can be

armed even if the windows are open.)

2. Remove the Intelligent Key from the ve-

hicle.

LIC2930

SECURITY SYSTEMS

2-34

Instruments and controls

3. Close all doors, hood and liftgate. Lock

all doors. The doors can be locked with
the Intelligent Key, door handle request
switch, or mechanical key.

4. Confirm that the

security indicator

light stays on for about 30 seconds. The
vehicle security system is now pre-
armed. The vehicle security system will
automatically

shift

into

the

armed

phase. The

security light begins to

flash once every three seconds. If during
the pre-armed phase one of the follow-
ing occurs, the system will not arm:

∙ Any door is unlocked with the mechani-

cal key, the Intelligent Key or door re-
quest switch.

∙ Ignition switch is placed in ACC or ON

position.

∙ Even when the driver and/or passen-

gers are in the vehicle, the system will
activate with all the doors, hood and
liftgate

locked

with

the

ignition

switch placed in the LOCK position.
When placing the ignition switch in
the ACC or ON position, the system
will be released.

Vehicle security system activation

The vehicle security system will give the
following alarm:

∙ The hazard lights blink (for non I-key

vehicle) or the headlights (for I-key ve-
hicle) blink and the horn sounds inter-
mittently.

∙ The alarm automatically turns off after

a period of time. However, the alarm
reactivates if the vehicle is tampered
with again. The alarm can be shut off by
unlocking the driver’s door by pressing
the

button on the key fob or plac-

ing the ignition switch in the ON or ACC
position.

The alarm is activated by:

∙ opening a door without using the key

fob (even if the door is unlocked by us-
ing the inside lock knob or the power
door lock switch).

How to stop an activated alarm

The alarm stops only by unlocking a door
or the liftgate with the mechanical key,
pressing the

button on the Intelligent

Key, or pushing the request switch on the
driver’s or passenger’s door with the Intel-
ligent Key in range of the door handle.

NISSAN VEHICLE IMMOBILIZER
SYSTEM

The NISSAN Vehicle Immobilizer System
will not allow the engine to start without
the use of a registered key.

If the engine fails to start using a registered
key (for example, when interference is
caused by another registered key, an auto-
mated toll road device or automatic pay-
ment device on the key ring), restart the
engine using the following procedures:

1. Leave the ignition switch in the ON po-

sition for approximately 5 seconds.

2. Place the ignition switch in the OFF or

LOCK position and wait approximately
10 seconds.

3. Repeat steps 1 and 2.

4. Restart the engine while holding the

device (which may have caused the in-
terference) separate from the regis-
tered key.

If the no start condition re-occurs, NISSAN
recommends placing the registered key on
a separate key ring to avoid interference
from other devices.

Never leave these keys in the vehicle.

Instruments and controls

2-35

FCC Notice:

For USA:

This device complies with Part 15 of the
FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence received, including interference
that may cause undesired operation.

NOTE:

Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s author-
ity to operate the equipment.

For Canada:

This

device

complies

with

Industry

Canada licence-exempt RSS standard(s).
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must ac-
cept any interference received, including
interference that may cause undesired
operation of the device.

Security indicator light

The security indicator light blinks whenever
the ignition switch is placed in the OFF,
LOCK or ACC position.

This function indicates the NISSAN Vehicle
Immobilizer System is operational.

If the NISSAN Vehicle Immobilizer System is
malfunctioning, the light will remain on
while the ignition switch is placed in the ON
position.

If the light still remains on and/or the
engine will not start, seek service for the
NISSAN Vehicle Immobilizer System ser-
vice as soon as possible. Please bring all
registered keys that you have. It is rec-
ommended that you visit a NISSAN
dealer for this service.

LIC0474

2-36

Instruments and controls

Nissan Pathfinder (2018 year). Instruction - part 8