|
|
TM-254 < SERVICE DATA AND SPECIFICATIONS (SDS) [CVT: RE0F11A] SERVICE DATA AND SPECIFICATIONS (SDS) SERVICE DATA AND SPECIFICATIONS (SDS) SERVICE DATA AND SPECIFICATIONS (SDS) General Specification INFOID:0000000009020058 *1: Refer to MA-12, "Fluids and Lubricants" . *2: The CVT fluid capacity is the reference value. Shift Characteristics INFOID:0000000009020059 Unit: rpm CAUTION: Lock-up is engaged at the vehicle speed of approximately 10 km/h (11 MPH) to 90 km/h (56 MPH). Stall Speed INFOID:0000000009020060 Unit: rpm Engine model HR16DE Drive type 2WD Transaxle Transaxle model RE0F11A Stall torque ratio 1.91 : 1 Pulley ratio Forward 2.200 – 0.550 Reverse 2.200 Auxiliary gearbox gear 1GR 1.821 2GR 1.000 Reverse 1.714 Counter gear 0.967 Final drive 3.882 Recommended fluid Genuine NISSAN CVT Fluid NS-3 *1 Fluid capacity (Approx.) 6.9 liter (6-1/8 Imp qt) *2 7.1 liter (6-1/4 Imp qt) *2 Remarks CVT fluid cooler (air-cooling) Not applicable Applicable CAUTION: • Use only Genuine NISSAN CVT Fluid NS-3. Do not mix with other fluid. the CVT, which is not covered by the (NISSAN new vehicle limited) warranty. Throttle position Shift pattern Engine speed At 40 km/h (25 MPH) At 60 km/h (37 MPH) 2/8 “D” position (Overdrive control OFF) 1,400 – 2,700 1,500 – 3,100 “D” position (Overdrive control ON) 1,500 – 2,700 2,400 – 3,200 “L” position 3,000 – 3,800 3,800 – 4,600 8/8 “D” position (Overdrive control OFF) 3,900 – 4,700 4,500 – 5,300 “D” position (Overdrive control ON) 3,600 – 4,400 4,300 – 5,100 “L” position 3,600 – 4,400 4,300 – 5,100 Stall speed 2,420 – 2,870 |