|
|
SEC-104 < DTC/CIRCUIT DIAGNOSIS > B26F4 STARTER CONTROL RELAY B26F4 STARTER CONTROL RELAY DTC Logic INFOID:0000000009567456 DTC DETECTION LOGIC NOTE: • If DTC B26F4 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to . • If DTC B26F4 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to . DTC CONFIRMATION PROCEDURE 1. PERFORM DTC CONFIRMATION PROCEDURE 1. Press push-button ignition switch under the following conditions to start engine, and wait 1 second or more. - Selector lever: In the P position - Brake pedal: Not depressed 2. Check DTC in Self Diagnostic Result mode of BCM using CONSULT. YES >> Go to SEC-104, "Diagnosis Procedure" . NO >> Inspection End. Diagnosis Procedure INFOID:0000000009567457 1. CHECK DTC OF IPDM E/R Check DTC in Self Diagnostic Result mode of IPDM E/R using CONSULT. YES >> Perform the diagnosis procedure related to the detected DTC. Refer to NO >> GO TO 2. 2. CHECK INTERMITTENT INCIDENT GI-41, "Intermittent Incident" >> Inspection End. DTC No. Trouble diagnosis name DTC detecting condition Possible cause B26F4 START CONT RLY OFF BCM requests IPDM E/R to turn starter • Harness or connectors (The CAN communication line is open • IPDM E/R |