|
|
PCS B26F6 BCM PCS-67 < DTC/CIRCUIT DIAGNOSIS > [POWER DISTRIBUTION SYSTEM] C D E F G H I J K L B A O P N B26F6 BCM DTC Logic INFOID:0000000009567616 DTC DETECTION LOGIC NOTE: • If DTC B26F6 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to • If DTC B26F6 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC CONFIRMATION PROCEDURE 1. PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON, and wait for 0.5 second or more. 2. Perform Self Diagnostic Result of BCM with CONSULT. YES >> Go to NO >> Inspection End. Diagnosis Procedure INFOID:0000000009567617 Regarding Wiring Diagram information, refer to . 1. CHECK SELF DIAGNOSTIC RESULT FOR IPDM E/R Perform Self Diagnostic Result of IPDM E/R with CONSULT. YES >> Refer to NO >> GO TO 2 2. CHECK IGNITION RELAY-1 POWER SUPPLY (IPDM E/R) Check voltage between IPDM E/R connector E47 and ground. Is the inspection result normal? YES >> Replace IPDM E/R. Refer to PCS-30, "Removal and Installation" . NO >> GO TO 3. 3. CHECK IGNITION RELAY-1 POWER SUPPLY (BCM) Check voltage between BCM connector M98 and ground. Is the inspection result normal? YES >> Refer to GI-41, "Intermittent Incident" . CONSULT Display DTC Detection Condition Possible Cause BCM Ignition relay-1 ON signal is not transmitted from BCM IPDM E/R Ground Voltage (Approx.) Connector Terminal E47 90 — Battery voltage BCM Ground Voltage (Approx.) Connector Terminal M98 98 — Battery voltage |