|
|
PCS SYSTEM PCS-35 < SYSTEM DESCRIPTION > [POWER DISTRIBUTION SYSTEM] C D E F G H I J K L B A O P N TION The power supply position changing operation can be performed with the following operations. NOTE: • When an Intelligent Key is within the detection area of inside key antenna and when Intelligent Key backside is contacted to push-button ignition switch, it is equivalent to the operations below. • When starting the engine, the BCM monitors under the engine start conditions: - Brake pedal operating condition - Selector lever position - Vehicle speed Vehicle speed: less than 4 km/h (2.5 MPH) Vehicle speed: 4 km/h (2.5 MPH) or more Emergency stop operation Power supply position Engine start/stop condition Push-button ignition switch operation frequency Selector lever position Brake pedal operation condition OFF → ACC — Not depressed 1 OFF → ACC → ON — Not depressed 2 OFF → ACC → ON → OFF — Not depressed 3 OFF → START ACC → START ON → START P or N position Depressed 1 Engine is running → OFF — — 1 Power supply position Engine start/stop condition Push-button ignition switch operation frequency Selector lever position Brake pedal operation condition Engine is running → ACC — — Emergency stop operation Engine stall return operation N position Not depressed 1 |