|
|
BCS-94 < SYSTEM DESCRIPTION > [WITHOUT INTELLIGENT KEY SYSTEM] DIAGNOSIS SYSTEM (BCM) ACTIVE TEST WORK SUPPORT RETAINED PWR INFOID:0000000011280255 DATA MONITOR AIR PRESSURE MONITOR INFOID:0000000011280256 NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. • Activate and display TPMS sensor IDs • Display tire pressure reported by the TPMS sensor • Read TPMS DTCs • Register TPMS sensor IDs SELF DIAGNOSTIC RESULT NOTE: Before performing Self Diagnostic Result, be sure to register the sensor ID or the actual malfunction may be different from that displayed on CONSULT. DATA MONITOR Test Item Description FLASHER This test is able to check turn signal lamp operation [LH/RH/Off]. THEFT IND This test is able to check security indicator lamp operation [On/Off]. VEHICLE SECURITY HORN This test is able to check vehicle security horn operation [On]. HEADLAMP(HI) This test is able to check vehicle security lamp operation [On]. Support Item Setting Description SECURITY ALARM SET On Security alarm ON. Off Security alarm OFF. Monitor Item [Unit] Description DOOR SW-DR [On/Off] Indicates condition of front door switch LH. DOOR SW-AS [On/Off] Indicates condition of front door switch RH. Monitor Item [Unit] Description AIR PRESS FL [kPa, kg/cm 2 or Psi] Indicates air pressure of front LH tire. AIR PRESS FR [kPa, kg/cm 2 or Psi] Indicates air pressure of front RH tire. AIR PRESS RR [kPa, kg/cm 2 or Psi] Indicates air pressure of rear RH tire. AIR PRESS RL [kPa, kg/cm 2 or Psi] Indicates air pressure of rear LH tire. ID REGST FL1 [Done/Yet] Indicates ID registration status of front LH sensor. ID REGST FR1 [Done/Yet] Indicates ID registration status of front RH sensor. ID REGST RR1 [Done/Yet] Indicates ID registration status of rear RH sensor. ID REGST RL1 [Done/Yet] Indicates ID registration status of rear LH sensor. |