Nissan Silvia. Manual - part 316

Available Side Bearing Adjusting Washers

NMPD0042S08

Thickness

mm (in)

Part number

2.00 (0.0787)
2.05 (0.0807)
2.10 (0.0827)
2.15 (0.0846)
2.20 (0.0866)
2.25 (0.0886)
2.30 (0.0906)
2.35 (0.0925)
2.40 (0.0945)
2.45 (0.0965)
2.50 (0.0984)
2.55 (0.1004)
2.60 (0.1024)
2.65 (0.1043)

38453-N3100
38453-N3101
38453-N3102
38453-N3103
38453-N3104
38453-N3105
38453-N3106
38453-N3107
38453-N3108
38453-N3109

38453-N3110

38453-N3111

38453-N3112
38453-N3113

Drive Pinion Height Adjustment

NMPD0042S06

Available pin-
ion height
adjust washers

Thickness mm (in)

Part number*

3.09 (0.1217)
3.12 (0.1228)
3.15 (0.1240)
3.18 (0.1252)
3.21 (0.1264)
3.24 (0.1276)
3.27 (0.1287)
3.30 (0.1299)

3.33 (0.1311)

3.36 (0.1323)
3.39 (0.1335)
3.42 (0.1346)
3.45 (0.1358)
3.48 (0.1370)
3.51 (0.1382)
3.54 (0.1394)
3.57 (0.1406)
3.60 (0.1417)
3.63 (0.1429)
3.66 (0.1441)

38154-P6017
38154-P6018
38154-P6019
38154-P6020
38154-P6021
38154-P6022
38154-P6023
38154-P6024
38154-P6025
38154-P6026
38154-P6027
38154-P6028
38154-P6029
38154-P6030
38154-P6031
38154-P6032
38154-P6033
38154-P6034
38154-P6035
38154-P6036

*: Always check with the Parts Department for the latest parts information.

IDX

REAR FINAL DRIVE

R200

Service Data and Specifications (SDS) (Cont’d)

PD-33

Drive Pinion Preload Adjustment

NMPD0042S07

Drive pinion bearing preload adjusting method

Adjusting washer and spacer

Drive pinion preload without front oil seal

N·m (kg-cm, in-lb)

1.1 - 1.4 (11 - 14, 9.5 - 12.2)

Available front
drive pinion
bearing adjust-
ing washer

Thickness mm (in)

Part number*

3.80 - 3.82 (0.1496 - 0.1504)
3.82 - 3.84 (0.1504 - 0.1512)
3.84 - 3.86 (0.1512 - 0.1520)
3.86 - 3.88 (0.1520 - 0.1528)
3.88 - 3.90 (0.1528 - 0.1535)
3.90 - 3.92 (0.1535 - 0.1543)
3.92 - 3.94 (0.1543 - 0.1551)
3.94 - 3.96 (0.1551 - 0.1559)
3.96 - 3.98 (0.1559 - 0.1567)
3.98 - 4.00 (0.1567 - 0.1575)
4.00 - 4.02 (0.1575 - 0.1583)
4.02 - 4.04 (0.1583 - 0.1591)
4.04 - 4.06 (0.1591 - 0.1598)
4.06 - 4.08 (0.1598 - 0.1606)
4.08 - 4.10 (0.1606 - 0.1614)

38125-61001
38126-61001
38127-61001
38128-61001
38129-61001
38130-61001
38131-61001
38132-61001
38133-61001
38134-61001
38135-61001
38136-61001
38137-61001
38138-61001
38139-61001

Available drive
pinion bearing
adjusting spac-
ers

Length

mm (in)

Part number*

46.5 (1.831)
46.8 (1.843)
45.6 (1.795)
46.2 (1.819)

38165-10V00
38165-10V01
38165-10V05
38165-10V06
38165-10V07

*: Always check with the Parts Department for the latest parts information.

REAR FINAL DRIVE

R200

Service Data and Specifications (SDS) (Cont’d)

PD-34

RESTRAINT SYSTEM

SECTION

CONTENTS

SEAT BELTS ...................................................................2

Precautions ..................................................................2

SUPPLEMENTAL RESTRAINT SYSTEM (SRS)

″

AIR BAG

″

.................................................................2

PRECAUTION FOR SEAT BELT SERVICE

..................2

Maintenance ................................................................3
Front Seat Belt.............................................................4

REMOVAL AND INSTALLATION

.................................4

Rear Seat Belt .............................................................5

REMOVAL AND INSTALLATION

.................................5

Tether Anchor Plate .....................................................6

REMOVAL AND INSTALLATION

.................................6

SUPPLEMENTAL RESTRAINT SYSTEM (SRS) ...........7

Precautions ..................................................................7

SUPPLEMENTAL RESTRAINT SYSTEM (SRS)

″

AIR BAG

″

.................................................................7

.........................7

WIRING DIAGRAMS AND TROUBLE DIAGNOSIS

.......7

Preparation ..................................................................8

SPECIAL SERVICE TOOLS

........................................8

COMMERCIAL SERVICE TOOL

..................................8

SRS Configuration .......................................................9
SRS Component Parts Location .................................9
Maintenance Items ....................................................10
Diagnosis Sensor Unit ...............................................10

REMOVAL AND INSTALLATION

...............................10

Driver Air Bag Module and Spiral Cable ...................12

REMOVAL AND INSTALLATION

...............................12

REMOVAL

...............................................................12

INSTALLATION

........................................................13

Front Passenger Air Bag Module ..............................14

REMOVAL

...............................................................14

INSTALLATION

........................................................15

Disposal of Air Bag Module .......................................16

CHECKING DEPLOYMENT TOOL

.............................16

DEPLOYMENT PROCEDURES FOR AIR BAG
MODULE (OUTSIDE OF VEHICLE)

...........................17

DEPLOYMENT OF AIR BAG MODULE WHILE
MOUNTED IN VEHICLE

...........................................19

DISPOSING OF AIR BAG MODULE

..........................20

Trouble Diagnoses Introduction.................................21

DIAGNOSIS FUNCTION

...........................................21

DIAGNOSIS MODE FOR CONSULT-II

.......................21

HOW TO CHANGE SELF-DIAGNOSIS MODE

WITH CONSULT-II

...................................................22

HOW TO CHANGE SELF-DIAGNOSIS MODE

WITHOUT CONSULT-II

............................................22

HOW TO ERASE SELF-DIAGNOSIS RESULTS

.........22

How to Perform Trouble Diagnoses for Quick
and Accurate Repair ..................................................24

INFORMATION FROM CUSTOMER

..........................24

PRELIMINARY CHECK

............................................24

WORK FLOW

..........................................................25

Wiring Diagram - SRS -.............................................26
SRS Operation Check ...............................................28

DIAGNOSTIC PROCEDURE 1

..................................28

Trouble Diagnoses with CONSULT-II...................29

DIAGNOSTIC PROCEDURE 2

..................................29

DIAGNOSTIC PROCEDURE 3

..................................31

DIAGNOSTIC PROCEDURE 4 (CONTINUED
FROM DIAGNOSTIC PROCEDURE 2)

......................33

DIAGNOSTIC PROCEDURE 5

..................................33

Trouble Diagnoses without CONSULT-II..............36

DIAGNOSTIC PROCEDURE 6

..................................36

DIAGNOSTIC PROCEDURE 7

..................................38

DIAGNOSTIC PROCEDURE 8 (CONTINUED
FROM DIAGNOSTIC PROCEDURE 6)

......................40

Does Not Turn Off .....................................................41

DIAGNOSTIC PROCEDURE 9

..................................41

Does Not Turn On .....................................................43

DIAGNOSTIC PROCEDURE 10

................................43

Trouble Diagnoses: SRS Does Not Enter
Diagnosis Mode Using Door Switch..........................44

DIAGNOSTIC PROCEDURE 11

................................44

Collision Diagnosis ....................................................46

SRS INSPECTION

...................................................46

IDX

Precautions

SUPPLEMENTAL RESTRAINT SYSTEM (SRS) “AIR BAG”

NMRS0001

The Supplemental Restraint System such as “AIR BAG” used along with a seat belt, helps to reduce the risk
or severity of injury to the driver and front passenger for certain types of collision. The SRS composition which
is available to NISSAN MODEL S15 is as follows:
The Supplemental Restraint System consists of driver air bag module (located in the center of the steering
wheel), front passenger air bag module (located on the instrument panel on passenger side), a diagnosis
sensor unit, warning lamp, wiring harness and spiral cable.

WARNING:

To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance should be per-
formed by an authorized NISSAN dealer.

Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system.

Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified with yellow harness connector.

PRECAUTION FOR SEAT BELT SERVICE

NMRS0002

CAUTION:

Do not use disassemble buckle or seat belt assembly.

Replace anchor bolts if they are deformed or worn out.

Never oil tongue and buckle.

If any component of seat belt assembly is questionable, do not repair. Replace the whole seat belt
assembly.

If webbing is cut, frayed, or damaged, replace seat belt assembly.

When replacing seat belt assembly, use a genuine seat belt assembly.

After A Collision

NMRS0002S01

WARNING:

Inspect all seat belt assemblies including retractors and attaching hardware after any collision.
NISSAN recommends that all seat belt assemblies in use during a collision be replaced unless the
collision was minor and the belts show no damage and continue to operate properly. Failure to do so
could result in serious personal injury in an accident. Seat belt assemblies not in use during a colli-
sion should also be replaced if either damage or improper operation is noted. Seat belt pre-tensioner
should be replaced even if the seat belts are not in use during a frontal collision in which the air bags
are deployed.
Replace any seat belt assembly (including anchor bolts) if:

The seat belt was in use at the time of a collision (except for minor collisions and the belts, retractors and
buckles show no damage and continue to operate properly).

The seat belt was damaged in an accident. (i.e. torn webbing, bent retractor or guide, etc.)

The seat belt attaching point was damaged in an accident. Inspect the seat belt attaching area for dam-
age or distortion and repair as necessary before installing a new seat belt assembly.

Anchor bolts are deformed or worn out.

The seat belt pre-tensioner should be replaced even if the seat belts are not in use during the collision in
which the air bags are deployed.

SEAT BELTS

Precautions

RS-2

Content .. 314 315 316 317 ..