Nissan Pathfinder. Manual - part 387

DLK-314

< REMOVAL AND INSTALLATION >

DOOR REQUEST SWITCH

DOOR REQUEST SWITCH

DRIVER SIDE
DRIVER SIDE : Removal and Installation

INFOID:0000000009175909

The driver side door request switch and driver side outside handle are serviced as an assembly. Refer to 

DLK-

302, "OUTSIDE HANDLE : Removal and Installation"

.

PASSENGER SIDE
PASSENGER SIDE : Removal and Installation

INFOID:0000000009175910

The passenger side door request switch and passenger side outside handle are serviced as an assembly.

Refer to 

DLK-302, "OUTSIDE HANDLE : Removal and Installation"

.

BACK DOOR
BACK DOOR : Removal and Installation

INFOID:0000000009175911

REMOVAL

1. Remove the back door outer finisher. Refer to 

EXT-43, "Removal and Installation"

.

2. Disconnect the harness connector from the back door request switch.
3. Remove the back door request switch.

INSTALLATION

Installation is in the reverse order of removal.

INSIDE KEY ANTENNA

DLK-315

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

INSIDE KEY ANTENNA

INSTRUMENT CENTER
INSTRUMENT CENTER : Removal and Installation

INFOID:0000000009175912

REMOVAL

1. Remove cluster lid C upper. Refer to 

IP-22, "CLUSTER LID C : Removal and Installation"

.

2. Remove the inside key antenna (instrument center) screw, and then remove inside key antenna (instru-

ment center).

INSTALLATION

Installation is in the reverse order of removal.

CONSOLE
CONSOLE : Removal and Installation

INFOID:0000000009175913

REMOVAL

1. Remove rear center ventilator duct. Refer to 

VTL-12, "REAR CENTER VENTILATOR DUCT : Removal

and Installation"

.

2. Remove the inside key antenna (console) screws and inside key antenna (console).

INSTALLATION

Installation is in the reverse order of removal.

LUGGAGE ROOM
LUGGAGE ROOM : Removal and Installation

INFOID:0000000009175914

REMOVAL

1. Remove the second row seatback. Refer to 

SE-94, "Removal and Installation"

.

2. Remove the inside key antenna (luggage room) clip, and then remove inside key antenna (luggage room).

INSTALLATION

Installation is in the reverse order of removal.

DLK-316

< REMOVAL AND INSTALLATION >

OUTSIDE KEY ANTENNA

OUTSIDE KEY ANTENNA

DRIVER SIDE
DRIVER SIDE : Removal and Installation

INFOID:0000000009175915

The driver side outside key antenna and driver side outside handle are serviced as an assembly. Refer to

DLK-302, "OUTSIDE HANDLE : Removal and Installation"

.

PASSENGER SIDE
PASSENGER SIDE : Removal and Installation

INFOID:0000000009175916

The passenger side outside key antenna and passenger side outside handle are serviced as an assembly.

Refer to 

DLK-302, "OUTSIDE HANDLE : Removal and Installation"

.

REAR BUMPER
REAR BUMPER : Removal and Installation

INFOID:0000000009175917

REMOVAL

1. Remove rear bumper fascia. Refer to 

EXT-20, "Removal and Installation"

.

2. Disconnect the harness connector from the rear bumper outside key antenna and remove.

INSTALLATION

Installation is in the reverse order of removal.

INTELLIGENT KEY WARNING BUZZER

DLK-317

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

INTELLIGENT KEY WARNING BUZZER

Removal and Installation

INFOID:0000000009175918

REMOVAL

NOTE:

The Intelligent Key warning buzzer is located in the left front area of the engine compartment.
1. Remove Intelligent Key warning buzzer clips.
2. Disconnect the harness connector from the Intelligent Key warning buzzer and remove.

INSTALLATION

Installation is in the reverse order of removal.