|
|
Content .. 1154 1155 1156 1157 ..
ADDITIONAL SERVICE WHEN REPLACING TRANSAXLE ASSEMBLY TM-83 < BASIC INSPECTION > [CVT: RE0F10E] C E F G H I J K L M A B TM N O P YES >> GO TO 4. NO >> Turn ignition switch OFF and wait for a minimum of 10 seconds then perform the work again. 4. WRITE THE DATA NOTE: Write data of new solenoid in TCM according to the following instructions: With CONSULT 1. Shift the selector lever to the P position. 2. Turn ignition switch OFF and wait for 10 seconds. 3. Turn ignition switch ON. 4. Select “Work Support” in “TRANSMISSION”. 5. Select “WRITE IP CHARA - REPLACEMENT AT/CVT”. 6. Write data in TCM according to the instructions on the CONSULT screen. NOTE: When writing is complete, the shift position indicator of the combination meter displays P. >> GO TO 5. 5. ERASE CVT FLUID DEGRADATION LEVEL DATA 1. Select “WORK SUPPORT” in “TRANSMISSION”. 2. Select “CONFORM CVTF DETERIORTN”. 3. Touch “Clear”. >> WORK END |