|
|
Content .. 1022 1023 1024 1025 ..
SE-94 < REMOVAL AND INSTALLATION > SECOND ROW SEATS Removal and Installation INFOID:0000000009727779 LH SEAT Removal CAUTION: • Before removal and installation, use shop cloths to protect parts from damage. • During removal and installation, an assistant is required to protect against injury or damage. INT-22, "KICKING PLATE : Removal and Installation - Rear . 2. Remove the headrests (LH/RH). 51030)] over the track alignment holes, then insert the two LH threaded bolts (A) through the brace into the track and tighten. : Front 6. Disconnect the harness connector (if equipped), then release from seat frame assembly. 51030)] over the track alignment holes, then insert the four LH threaded bolts (A) through the brace into the track and tighten. : Front 11. Remove the seat rear bolts. 19. EZ entry cable 20. Support strut 21. Inner finisher (LH) 22. Outer finisher (LH) 23. Seat harness 24. Seat cushion release cable 25. Seat slide release cable 26. Seat belt buckle 27. Rear finisher 28. Trim stiffener 29. Seatback board 30. Tether anchor finisher 31. EPP upper panel 32. Support finisher 33. Seatback pad 34. Seatback trim 35. Headrest holder (locked) 36. Headrest holder (free) 37. Headrest A. Seat cushion pivot bolt ALJIA1106ZZ AWJIA0954ZZ |