|
|
WT-48 < REMOVAL AND INSTALLATION > TIRE PRESSURE SENSOR TIRE PRESSURE SENSOR Exploded View INFOID:0000000006941850 Removal and Installation INFOID:0000000006941851 REMOVAL 1. Remove tire assembly. Refer to WT-46, "Removal and Installation" 2. Remove valve cap, valve core and then deflate tire. 3. Remove valve nut retaining tire pressure sensor and allow tire pressure sensor to fall into tire. 4. Use the tire changer and disengage the tire beads. CAUTION: • Verify that the tire pressure sensor (1) is at the bottom of the tire while performing the above. • Be sure not to damage the road wheel or tire pressure sensor. 5. Apply bead cream or an equivalent to the tire beads. 6. Set tire onto the tire changer turntable so that the tire pressure JSEIA0384GB 1. Tire pressure sensor 2. Grommet seal 3. Valve nut 4. Valve core 5. Valve cap : N·m (kg-m, in-lb) : Always replace after every disassembly. : Parts that are replaced as a set when the tire is replaced. JPEIC0104ZZ Revision: 2012 March 2011 Murano CrossCabriolet |