|
|
содержание .. 313 314 315 316 ..
DAS-150 < DTC/CIRCUIT DIAGNOSIS > [BSW] C1A04 ABS/TCS/VDC SYSTEM C1A04 ABS/TCS/VDC SYSTEM DTC Logic INFOID:0000000009723340 DTC DETECTION LOGIC NOTE: . DTC CONFIRMATION PROCEDURE 1. PERFORM DTC CONFIRMATION PROCEDURE 1. Start the engine. 2. Wait for approximately 10 minutes after turning the BSW system ON. 3. Perform “All DTC Reading” with CONSULT. 4. Check if the “C1A04” is detected as the current malfunction in “Self Diagnostic Result” of “AVM”. Is “C1A04” detected as the current malfunction? YES >> Refer to DAS-150, "Diagnosis Procedure" NO >> Refer to GI-44, "Intermittent Incident" . Diagnosis Procedure INFOID:0000000009723341 1. CHECK SELF-DIAGNOSIS RESULTS 1. Perform “All DTC Reading” with CONSULT. 2. Check if the “U1000” is detected other than “C1A04” in “Self Diagnostic Result” of “AVM”. Is “U1000” detected? YES >> Perform the CAN communication system inspection. Repair or replace the malfunctioning parts. . NO >> GO TO 2. 2. CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS RESULTS Check if any DTC is detected in “Self Diagnostic Result” of “ABS”. YES >> Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to . NO >> Replace the camera control unit. Refer to DAS-187, "Removal and Installation" . DTC Trouble diagnosis name DTC detecting condition Possible causes C1A04 ABS/TCS/VDC CIRC If a malfunction occurs in the VDC/TCS/ABS ABS actuator and electric unit (control |