Nissan Qashqai J11. Manual - part 2154

DAS-30

< SYSTEM DESCRIPTION >

[DRIVER ASSISTANCE SYSTEM]

OPERATION

• Time shown in the figure is approximate.

• Whenever BSW system is turned off, the BSW ON indicator remains OFF.

MOD

MOD : System Display and Warning

INFOID:0000000010416796

INDICATOR AND WARNING LAMP

The MOD system can be turned ON or OFF for the current ignition cycle using the warning system switch.
When toggled between ON and OFF, the indicator will appear on the right side of the rear view camera screen.

DISPLAY AND WARNING OPERATION

No.

Name

Description

1.

MOD indicator (blue)

• Turns ON while MOD system is ON.
• Under the following conditions, the MOD indicator (blue) will blink. 
- When the VDC system (except TCS function) or ABS operates.
- When the VDC system is turned off.

MOD warning lamp (orange)

• Turns ON when MOD system is malfunctioning.
• Blinks under the following conditions:
- When the component temperature reaches high level.
- When rear view camera blockage is detected.

Vehicle condition/Driver's operation

Moving Ob-

ject Detec-

tion ON 

indicator

Vehicle speed

(Approx.) 

[km/h (MPH)]

Status of vehi-

cle detection 
within detec-

tion area

Indication on the 

Moving Object Detection indicator

Buzzer

OFF

—

—

OFF

OFF

Blue

 Less than ap-

prox. 

8 km/h (5 

MPH)

Vehicle is 

detected

ON

ON

Approx.

8 km/h (5 

MPH) or more

Vehicle is ab-

sent

ON

OFF

Vehicle is 

detected

ON

OFF

Vehicle is not 

detected

ON

OFF

DAS

HANDLING PRECAUTION

DAS-31

< SYSTEM DESCRIPTION >

[DRIVER ASSISTANCE SYSTEM]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

HANDLING PRECAUTION

Precautions for Lane Departure Warning

INFOID:0000000010416800

LANE DEPARTURE WARNING (LDW)

• If the LDW system malfunctions, it will cancel automatically, and the LDW malfunction message will appear

in the vehicle information display.

• LDW system is only a warning device to inform the driver of a potential unintended lane departure. It will not

steer the vehicle or prevent loss of control. It is the driver’s responsibility to stay alert, drive safely, keep the
vehicle in the traveling lane, and be in control of the vehicle at all times.

• LDW system will not operate at speeds below approximately 60 km/h (37 MPH) or if it cannot detect lane

markers.

• Excessive noise will interfere with the warning chime sound, and the chime may not be heard.
• LDW system may not function properly under the following conditions:
- On roads where there are multiple parallel lane markers; lane markers that are faded or not painted clearly;

yellow painted lane markers; non-standard lane markers; or lane markers covered with water, dirt or snow,
etc.

- On roads where the discontinued lane markers are still detectable.
- On roads where there are sharp curves.
- On roads where there are sharply contrasting objects, such as shadows, snow, water, wheel ruts, seams or

lines remaining after road repairs. (The LDW system could detect these items as lane markers.)

- On roads where the traveling lane merges or separates.
- When the vehicle's traveling direction does not align with the lane marker.
- When a sudden change in brightness occurs. (For example, when the vehicle enters or exits a tunnel or

under a bridge.) 

Precautions for Blind Spot Warning

INFOID:0000000010416801

BLIND SPOT WARNING

• The Blind Spot Warning system is not a replacement for proper driving procedure and are not designed to

prevent contact with vehicles or objects. When changing lanes, always use the side and rear mirrors and
turn and look in the direction driver will move to ensure it is safe to change lanes. Never rely solely on the
Blind Spot Warning system.

• The Blind Spot Warning system may not provide the warning or the control for vehicles that pass through the

detection zone quickly.

• Excessive noise (for example, audio system volume, open vehicle window) will interfere with the chime

sound, and it may not be heard.

Precautions for Traffic Sign Recognition

INFOID:0000000010508335

HANDLING OF FRONT CAMERA UNIT

Refer to 

DAS-31, "Precautions for Lane Departure Warning"

.

TRAFFIC SIGN RECOGNITION

CAUTION:

• There are limitations to the Traffic Sign Recognition. Be careful to observe traffic signs, etc. and

drive safely.

• Detection may not be possible depending on the vehicle status, driving conditions, traffic environ-

ment, weather conditions, and the condition of the sign.

• Under conditions such as the following, detection of Traffic Sign Recognition is delayed and detec-

tion may not be possible.

- A portion of the sign is hidden and obscured by a tree, dirt, etc.
- The shape of the sign is changed due to the sign being bent, etc.
- The vehicle is traveling at a fast speed.
• Depending on certain conditions, it may not be possible to hear the warning sound due to outside

noises.

Precautions for Drive Attention Alert

INFOID:0000000010508336

DRIVE ATTENTION ALERT

CAUTION:

DAS-32

< SYSTEM DESCRIPTION >

[DRIVER ASSISTANCE SYSTEM]

HANDLING PRECAUTION

This is not a system to assist driving while tired. Driving while tired may lead to a serious accident. Be
sure to have sufficient rest before driving, and drive safely.

DAS

DIAGNOSIS SYSTEM (AROUND VIEW MONITOR CONTROL UNIT)

DAS-33

< SYSTEM DESCRIPTION >

[DRIVER ASSISTANCE SYSTEM]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

DIAGNOSIS SYSTEM (AROUND VIEW MONITOR CONTROL UNIT)

CONSULT Function

INFOID:0000000010416802

CONSULT FUNCTIONS

CONSULT performs the following functions via communication with the around view monitor control unit.

ECU IDENTIFICATION

The part number of around view monitor control unit is displayed.

SELF DIAGNOSTIC RESULT

Refer to 

DAS-49, "DTC Index"

.

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

Direct Diagnostic Mode

Description

ECU Identification

The around view monitor control unit part number is displayed.

Self Diagnostic Result

The around view monitor control unit self diagnostic results are displayed.

Data Monitor

The around view monitor control unit input/output data is displayed in real time.

Work support

The settings for around view monitor control unit functions can be changed.

Configuration

• The vehicle specification can be read and saved.
• The vehicle specification can be written when replacing around view monitor control unit.

CAN Diag Support Mntr

The result of transmit/receive diagnosis of CAN communication is displayed.

Monitor Item

Description

ST ANGLE SENSOR SIGNAL [On/Off]

Indicates condition of steering angle sensor signal.

REVERSE SIGNAL [On/Off]

Indicates selector lever position.

VEHICLE SPEED SIGNAL [mph/km/h]

Indicates condition of vehicle speed signal.

ILL [On/Off]

Indicates status of dimmer signal.

CAMERA SWITCH SIGNAL [On/Off]

Indicates condition of camera switch signal.

CAMERA OFF SIGNAL [On/Off]

Indicates condition of camera OFF signal.

ST ANGLE SENSOR TYPE [Absolute]

Indicates steering angle sensor type.

STEERING GEAR RATIO TYPE [Type O]

Indicates steering gear ratio type.

STEERING POSITION [LHD/RHD]

Indicates LH or RH drive type.

REAR CAMERA IMAGE SIGNAL [OK/
NG]

Indicates condition of camera image signal. 

WASH SW [On/Off]

Indicates state of wash switch indicator output.

R-CAMERA COMM STATUS [OK/NG]

Indicates status of rear camera communication.

R-CAMERA COMM LINE [OK/NG]

Indicates condition of rear camera communication line.

F-CAMERA IMAGE SIGNAL [OK/NG]

Indicates condition of camera image signal. 

F-CAMERA COMM STATUS [OK/NG]

Indicates status of front camera communication.

F-CAMERA COMM LINE [OK/NG]

Indicates condition of front camera communication line.

DR-SIDE CAMERA IMAGE SIG [OK/NG]

Indicates condition of driver side camera image signal. 

DR CAMERA COMM STATUS [OK/NG]

Indicates status of driver side camera communication.

DR-SIDE CAMERA COMM LINE [OK/
NG]

Indicates condition of driver side camera communication line.

PA-SIDE CAMERA IMAGE SIG [OK/NG]

Indicates condition of passenger side camera image signal. 

PA CAMERA COMM STATUS [OK/NG]

Indicates status of passenger side camera communication.

PA-SIDE CAMERA COMM LINE [OK/NG]

Indicates condition of passenger side camera communication line.