Nissan Juke F15. Manual - part 56

AV-210

< SYSTEM DESCRIPTION >

[INTEGRATED CONTROL SYSTEM]

DIAGNOSIS SYSTEM (MULTI DISPLAY UNIT)

DIAGNOSIS SYSTEM (MULTI DISPLAY UNIT)

CONSULT Function

INFOID:0000000012202617

APPLICATION ITEM

CONSULT performs the following functions via CAN communication with multi display unit.

SELF DIAGNOSTIC RESULT

Refer to 

AV-215, "DTC Index"

.

DATA MONITOR

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable

to this vehicle, refer to CONSULT display items.

Diagnosis mode

Description

Self Diagnostic Results

Displays malfunctioning systems stored in the multi display unit.

Data Monitor

Displays the multi display unit input/output data in real time.

Active Test

The multi display unit sends a drive signal to electronic components to check their operation.

CAN Diag Support Monitor

Displays CAN communication status.

Monitor item

Unit

Description

ECO SW

On / Off

Displays the ECO switch signal status sent via CAN communication.

NORMAL SW

On / Off

Displays the NORMAL switch signal status sent via CAN communication.

SPORTS SW

On / Off

Displays the SPORTS switch signal status sent via CAN communication.

BOOST PRESSURE

kPa

Displays the boost pressure signal value received from ECM via CAN com-
munication.

ENGINE SPEED

Tr/min

Displays the engine speed signal value received from ECM via CAN com-
munication.

ENGINE TORQUE

Nm

Displays the engine torque signal value received from ECM via CAN com-
munication.

BATTERY VOLTAGE

V

Displays the input voltage value.

FUEL CONSUMPTION

mm

3

Displays the fuel consumption signal value received from ECM via CAN 
communication.

VEHICLE SPEED

km/h

Displays the vehicle speed signal value received from the combination 
meter via CAN communication.

LONG ACC

G

Displays the decel G signal received from ABS actuator and electric unit 
(control unit) via CAN communication.

TRANCE ACC

G

Displays the side G signal received from ABS actuator and electric unit 
(control unit) via CAN communication.

DIST TOTAL

km

Displays the mileage signal value received from the combination meter via 
CAN communication.

POSI LIGHT REQ

On / Off

Displays the parking lamp signal value received from BCM via CAN com-
munication.

CLUSTER ILL REQ

On / Off

Displays the dimming signal value received from BCM via CAN communi-
cation.

ENGINE STATUS

STOP / STALL / 

RUN / CRA

Displays the engine status signal value received from ECM via CAN com-
munication.

A/C SW

*

On / Off

Displays the A/C switch signal status sent via CAN communication.

AUTO SW

*

On / Off

Displays the AUTO switch signal status sent via CAN communication.

RR DEF SW

*

On / Off

Displays the RR DEF switch signal status sent via CAN communication.

FR DEF SW

*

On / Off

Displays the FR DEF switch signal status sent via CAN communication.

AV

DIAGNOSIS SYSTEM (MULTI DISPLAY UNIT)

AV-211

< SYSTEM DESCRIPTION >

[INTEGRATED CONTROL SYSTEM]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

*: This is not used to determine ON/OFF of the indicator lamp.

ACTIVE TEST

Indicator

VENT SW1

*

On / Off

Displays the air outlet switch signal status sent via CAN communication.

VENT SW2

*

VENT / B/L / FOOT 

/ D/F

Displays the air outlet switch signal status sent via CAN communication.

INTAKE SW

*

On / Off

Displays the air intake switch signal status sent via CAN communication.

INTAKE SW LONG PUSH

*

On / Off

Displays the air intake switch hold signal status sent via CAN communica-
tion.

OFF SW

*

On / Off

Displays the OFF switch signal status sent via CAN communication.

TEMP SW1

*

On / Off

Displays the temperature control dial signal status sent via CAN communi-
cation.

FAN SW1

*

On / Off

Displays the fan control dial signal status sent via CAN communication.

A/C SW IND

On / Off

Displays the A/C switch indicator signal value received from the A/C auto 
amp. via CAN communication.

A/C INDICATOR

On / Off

Displays the A/C display signal value received from the A/C auto amp. via 
CAN communication.

OFF INDICATOR

On / Off

Displays the OFF display signal value received from the A/C auto amp. via 
CAN communication.

AIR VENT IND

Non-display / VENT 

/

 B/L / FOOT /

 D/F / DEF

Displays the air outlet indicator signal value received from the A/C auto 
amp. via CAN communication.

FR DEF SW IND

On / Off

Displays the RF DEF indicator signal value received from the A/C auto 
amp. via CAN communication.

FRE SW IND

On / Off

Displays the FRE indicator signal value received from the A/C auto amp. 
via CAN communication.

REC SW IND

On / Off

Displays the REC indicator signal value received from the A/C auto amp. 
via CAN communication.

RR DEF SW IND

On / Off

Displays the RR DEF indicator signal value received from the IPDM E/R 
via CAN communication.

AUTO IND

Off / Auto

Displays the AUTO indicator signal value received from the A/C auto amp. 
via CAN communication.

TEMP IND

°C

Displays the temperature setting unit signal value received from the A/C 
auto amp. via CAN communication.

FAN IND

Off / speed

Displays the fan setting signal value received from the A/C auto amp. via 
CAN communication.

Monitor item

Unit

Description

Test Item

Description

INDICATOR

The test activates the switch illuminations, display illuminations, and switch LEDs in the AIR CON 
mode and D-MODES to see if they are functioning normally.

Test Item

Function

INDICATOR

The sequence below is repeated.
• All indicators remain ON for 5 seconds in AIR CON mode

⇔All indicators remain ON for 5 seconds 

in D-MODE.

AV-212

< ECU DIAGNOSIS INFORMATION >

[INTEGRATED CONTROL SYSTEM]

MULTI DISPLAY UNIT

ECU DIAGNOSIS INFORMATION

MULTI DISPLAY UNIT

Reference Value

INFOID:0000000012202618

VALUES ON THE DIAGNOSIS TOOL

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable

to this vehicle, refer to CONSULT display items.

Monitor item

Test condition

Reference value/Status

ECO SW

Ignition switch ON

ECO mode

On

Other than the above

Off

NORMAL SW

Ignition switch ON

NORMAL mode

On

Other than the above

Off

SPORTS SW

Ignition switch ON

SPORT mode

On

Other than the above

Off

BOOST PRESSURE

Ignition switch ON Engine running

Values according to boost 
pressure

ENGINE SPEED
 [Tr/min] 

Ignition switch ON Engine running

Values according to en-
gine speed

ENGINE TORQUE
 [Nm] 

Ignition switch ON Engine running

Values according to en-
gine torque

BATTERY VOLTAGE
[V]

Ignition switch ON

—

Values according to input 
voltage

FUEL CONSUMPTION
 [mm

3

] 

Ignition switch ON Engine running

Values according to in-
stantaneous fuel con-
sumption

VEHICLE SPEED
[km/h]

Ignition switch ON Driving

Values according to vehi-
cle speed

LONG ACC
 [G] 

Ignition switch ON Driving

Values according to decel. 
G

TRANCE ACC
 [G] 

Ignition switch ON Driving

Values according to side G

DIST TOTAL
[km/h]

Ignition switch ON

—

Values according to mile-
age

POSI LIGHT REQ

Ignition switch ON

Light SW at 1st or 2nd position

On

Light switch OFF

Off

CLUSTER ILL REQ

Ignition switch ON

Block the light beam from the auto light sensor 
when the light switch is in the 1st position, 2nd 
position or AUTO position.

On

Expose the auto light sensor to light when the 
light switch is OFF or in the 1st position, 2nd 
position or AUTO position.

Off

ENGINE STATUS

Ignition switch ON

Engine stop

STOP

Engine stall

STALL

Engine running

RUN

Engine cranking

CRA

A/C SW

*

Ignition switch ON

Cycles On/Off whenever the A/C switch is 
pressed.

On

→Off→On

AUTO SW

*

Ignition switch ON

Cycles On/Off whenever the AUTO switch is 
pressed.

On

→Off→On

AV

MULTI DISPLAY UNIT

AV-213

< ECU DIAGNOSIS INFORMATION >

[INTEGRATED CONTROL SYSTEM]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

RR DEF SW

*

Ignition switch ON While the rear DEF switch is held down

On

Ignition switch ON Other than the above

Off

FR DEF SW

*

Ignition switch ON

Cycles On/Off whenever the front DEF switch is 
pressed.

On

→Off→On

VENT SW1

*

Ignition switch ON

Cycles On/Off whenever the VENT, B/L, FOOT, 
or D/F switch is pressed.

On

→Off→On

VENT SW2

*

Ignition switch ON

Press the VENT switch.

VENT

Press the B/L switch.

B/L

Press the FOOT switch.

FOOT

Press the D/F switch.

D/F

INTAKE SW

*

Ignition switch ON

Cycles On/Off whenever the intake switch is 
pressed.

On

→Off→On

INT SW LONG PUSH

*

Ignition switch ON

Cycles On/Off whenever the intake switch is 
held down.

On

→Off→On

Off SW

*

Ignition switch ON

Cycles On/Off whenever the OFF switch is held 
down.

On

→Off→On

TEMP SW1

*

Ignition switch ON

Cycles On/Off whenever the temperature con-
trol dial is turned clockwise or counterclock-
wise.

On

→Off→On

FAN SW1

*

Ignition switch ON

Cycles On/Off whenever the fan control dial is 
turned clockwise or counterclockwise.

On

→Off→On

A/C SW IND

Ignition switch ON

A/C switch indicator ON

On

A/C switch indicator OFF

Off

A/C INDICATOR

Ignition switch ON

A/C indicator ON

On

A/C indicator OFF

Off

Off INDICATOR

Ignition switch ON

Air conditioner OFF

On

Other than the above

Off

AIR VENT IND

Ignition switch ON

Air conditioner OFF

Nothing displayed.

VENT mode

VENT

B/L mode

B/L

FOOT mode

FOOT

D/F mode

D/F

DEF mode

DEF

FR DEF SW IND

Ignition switch ON

Front DEF switch indicator ON

On

Other than the above

Off

FRE SW IND

Ignition switch ON

FRE switch indicator ON

On

Other than the above

Off

REC SW IND

Ignition switch ON

REC switch indicator ON

On

Other than the above

Off

RR DEF SW IND

Ignition switch ON

Rear DEF switch indicator ON

On

Other than the above

Off

AUTO IND

Ignition switch ON

MANUAL mode

Off

AUTO mode

Auto

TEMP IND
 [

°C] 

Ignition switch ON

—

Displays the temperature 
set by the user.

FAN IND

Ignition switch ON

Air conditioner OFF

Off

Displays a value according to the fan speed.

1 to 7 speed

Monitor item

Test condition

Reference value/Status