Mazda Mazdaspeed 3 (2013 year). Instruction

qOperating the Satellite Radio

Channel preset buttons

Seek tuning
buttons

Manual tuning dial

Category
button

Band selector buttons

Scan button

Channel preset buttons

Text/Electronic Serial number button

Satellite button

Instant replay button

Display button

Information display

All operations of the satellite radio are displayed on the Information display.

Channel number, Channel name, Category name, Artist name, Song title,
ID code, Preset channel number, Bank number, Error signs

6-40

Interior Comfort

Some models.

Audio System

NOTE

This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
- Increase the separation between the
equipment and tuner.
- Connect the equipment into an outlet on a
circuit different from that to which the tuner is
connected.
- Consult the dealer or an experienced radio/
TV technician for help.

What is satellite radio?

With over 130 channels, SIRIUS Satellite
Radio brings you more of what you love.
Get 69 channels of 100 % commercial-
free music, plus all your favorite sports,
news, talk and entertainment. Everything
worth listening to is now on SIRIUS.
100 % Commercial-free Music

―With

music from every genre, artist-dedicated
channels, live performances and more,
SIRIUS is the home of 100 %
commercial-free music.
Live Sports Play-by-Play & Expert
Talk

―Hear every NFL game, every

NASCAR

race and college sports

coverage from over 150 schools. Plus
24/7 sports talk with channels like
SIRIUS NFL Radio, SIRIUS NASCAR
Radio and more.
Exclusive Entertainment and
Talk

―The biggest names, compelling

talk, hilarious comedy. Hear Howard
Stern, Martha Stewart, Jamie Foxx, Blue
Collar Comedy, Playboy Radio, political
talk and more.
World-class News

―Stay informed with

FOX, CNN, CNBC, NPR

, BBC and

more.
Plus local traffic and weather.
Family & Kids

―Entertain the entire

family with Radio Disney, Kids Place
Live, Laugh USA and more.

Sign up for SIRIUS Radio today! For
more information, visit
www.siriusxm.com.
Satellite radio is only available in regions
providing satellite radio service (some
areas of the United States and Canada).

How to Activate Satellite Radio

You must call SIRIUS to activate your
service. Activation is free and takes only a
few minutes.

Interior Comfort

Audio System

6-41

SIRIUS service uses an ID code to
identify your radio. This code is needed to
activate SIRIUS service, and report any
problems.

To activate you SIRIUS radio tuner, call a
SIRIUS customer service specialist at 1-
888-539-7474 or you can visit SIRIUS
online at www.siriusxm.com.

Please have the following information
ready:

SIRIUS ID (12-digit electronic serial
no., or ESN

)

Valid credit card information (may not
be required at initial sign-up)

*ESN: Electronic Serial Number

Displaying the SIRIUS ID (ESN)

When the ESN button (

) is pressed

for 1.5 seconds or longer, or the manual
tuning dial is turned to channel 0, a 12-
digit Electronic Serial Number (ESN) for
the SIRIUS tuner is displayed.

(If the SIRIUS ID (ESN) for the tuner
does not display)
If

“ESN

FAIL

” is displayed after

pressing the ESN button (

) for 1.5

seconds or longer, contact an Authorized
Mazda Dealer.

Be sure you are parked outside with a
clear view of open sky, you will be
instructed to turn on your radio (in SAT
mode and tuned to channel 184).
Activation typically takes only 2

―5

minutes.

SIRIUS operation

All operations of the satellite radio are
conducted by means of the audio unit.

SIRIUS radio mode selection

When the satellite button (

) is

pressed during ACC ON, it will play the
last SIRIUS channel in use before the
mode was switched over to another mode
or the power was turned off.
When the satellite button (

) is

pressed in a mode other than the SIRIUS
mode, the last channel in use will be
received.
Every time the satellite button (

) is

pressed, the bank changes in the order
shown below.

SR2

SR1

SR3

NOTE

SR1, SR2 and SR3: six stations can be stored
in each bank for convenient access to your
favorite stations.

Operation in the initial state

It may take some time to start up the
equipment when it is in the initial state,
when there is a change in the user's
subscription condition, or when the
SIRIUS channel map is changed.

6-42

Interior Comfort

Audio System

“UPDATING xx%” is displayed when the
SIRIUS channel map is changed. If the
unit is initialized or the user contract
content is changed,

“UPDATING” is

displayed. Updating could take as long as
three minutes depending on the
geographical area. When the unit is in an
initialized state, channel 184 is displayed
after the display indicates

“UPDATING 100%”. If the SIRIUS
channel map or the user contract content
is changed, the channel prior to the
change is displayed after

“UPDATING” is

displayed. After the initialization display,
it may take as long as 12 seconds to
receive channel 184.

NOTE

Do not perform the following operation while
“UPDATING” is displayed. Otherwise, the
updating procedure will be cancelled.

Turning off the audio power

Switching to other modes

Switching the ignition off

When the SIRIUS mode is switched to
another mode, or when the power is
turned off, the present channel which is
being received is stored as the last
channel.

Channel selection

Turning the manual tuning dial allows you
to select the desired receiving channel.

Turn the knob clockwise: Channel Up

Turn the knob counterclockwise:
Channel Down

Unsubscribed channel

When a selected station has not been
subscribed to, the display indicates the
following:
After the channel number is displayed,
[CALL

888] and [539

SIRI]

(Flashes alternately) is displayed.

NOTE

When the subscription contract is canceled, all
of the channels including channel 184 appear
as unsubscribed.

Invalid channel

The display switches between [SR
(bank number)

INVALID] and [SR

(bank number)

CHANNEL] only when

a selected channel is not broadcasting.

NOTE

If the last channel selected has become
unavailable because of a channel update the
above indication is displayed until any button
is pressed.

Preset channel programming

(Programming with

“channel number”

display)

1. Select the desired channel to be

programmed. At this point, the
following is displayed:
[SR

(bank number)

(channel

number)]

2. Keep pressing the channel preset

button for 1.5 seconds or more.
The programming process is complete
after the channel number flashes. Then,
[SR

(bank number)] is displayed

and a beep sound is heard at the same
time.

3. [SR

(bank number)

(preset number)

(channel number)]

are displayed.

Interior Comfort

Audio System

6-43

(Programming with

“text” display (e.g.

channel name))

1. Select the desired channel to be

programmed. At this point, the
following is displayed:
[SR

(bank number)

(selected text

(e.g. channel name))]

2. Keep pressing the channel preset

button for 1.5 seconds or more.
The programming process is complete
after the text (e.g. channel name)
flashes. Then, [SR

(bank number)]

is displayed and you will hear beep
sound at the same time.

3. [SR

(bank number)

(preset number)

(channel number)]

are displayed.

4. Three seconds later, it returns to normal

display. [SR

(bank number)

(text

(e.g. channel name))]

NOTE

Six stations can be stored in each bank, SR1,
SR2, and SR3 for convenient access to your
favorite stations.

Preset channel call-up

Press and release the channel preset
button,
[SR

(bank number)

(preset

number)

(channel number)] appears.

When the preset button is pressed during
text mode, its channel number is
displayed first for three second and then
its text is displayed.

NOTE

In the initial setting, all channels are preset to
184.

Category change

Press the category button (

) and

select the desired category.

Press the category button ( ):
Category up

Press the category button ( ):
Category down

Every time the category button ( ) is
pressed, the category is changed over in
the order shown below.
At this time, the lowest (smallest-number)
channel within the category indicated is
received.
When the highest (or lowest) category is
reached, the category is changed over in
the order shown below.
Highest category

→ All categories →

Lowest category

NOTE

While all categories are selected, all channels
covering a category can be accessed
(Category off condition).

Channel selection within a category

If you are in a selected category and the
channel number is displayed, turning the
manual tuning dial moves the channel
number up/down in that category.

Turn the manual tuning dial clockwise:
Channel Up

Turn the manual tuning dial
counterclockwise: Channel Down

NOTE

The channel number needs to be indicated in
the display to use manual tuning dial for this
function.

6-44

Interior Comfort

Audio System

Scan tuning

Press the scan button (

) to

automatically sample stations. Scanning
stops at each station for about five
seconds. To hold a station, press the scan
button (

) again during this interval.

NOTE

Unsubscribed channels, invalid channels,
parental lock channels and channel 0 are
not subject to the scan, therefore these
channels will be skipped automatically.

You can scan all channels while all
categories are selected. If you are in a
selected category, you can only scan the
channels in that category.

Channel number, channel name,
category, artist, song titles and info
display

Each time the display button (

) is

pressed during SIRIUS reception, the
display of the text data is changed over in
the order shown below.

Channel number

Channel name

Category
name

Artist name

Info

Song title

NOTE

Eight characters are displayed on one
screen.

To display the rest of the characters of a
long title, press the text button (

The display scrolls the next eight
characters. Press the text button (

)

again after the last eight characters have
been displayed to return to the beginning of
the title.

(Channel number display)

When the display button (

) is

pressed while in info display mode, the
mode changes to the channel number
display mode.

(Channel name display)

When the display button (

) is

pressed while in channel number
display mode, it changes to channel
name display mode.

There are short (eight fixed characters)
and long names for the channel name.

The long name is displayed first, and
three seconds later the short name is
displayed. If there is no short name, the
long name is displayed.

To display the rest of the characters of
the channel name, press the text button
(

). The display scrolls the next

eight characters. Press the text button
(

) again after the last eight

characters have been displayed to
return to the beginning of the title.

Press the text button (

) while the

short name is displayed to switch the
display to the long name.

Three seconds after scrolling the long
name, the display automatically returns
to the first part of the long name. Three
more seconds and the short name
appears.

Interior Comfort

Audio System

6-45

If there is no channel name,

“NO TITLE” is displayed.

(Category name display)

When the display button (

) is

pressed while in channel name display
mode, it changes to the category name
display mode.

There are short (eight fixed characters)
and long names for the category name.

The long name is displayed first, and
three seconds later the short name is
displayed. If there is no short name, the
long name is displayed.

To display the rest of the characters of
the category name, press the text
button (

). The display scrolls the

next eight characters. Press the text
button (

) again after the last

eight characters have been displayed to
return to the beginning of the title.

Press the text button (

) while the

short name is displayed to switch the
display to the long name.

Three seconds after scrolling the long
name, the display automatically returns
to display the first part of the long
name. Three more seconds and the
short name appears.

If there is no category name,

“NO CATEGORY” is displayed.

(Artist name display)

When the display button (

) is

pressed while in category name display
mode, it changes to the artist name
display mode.

To display the rest of the characters of
the artist's name, press the text button
(

). The display scrolls the next

eight characters. Press the text button
(

) again after the last eight

characters have been displayed to
return to the beginning of the title.

Three seconds after scrolling the artist
name, the display automatically return
to display the first part of the artist's
name.

If there is no artist's name,

“NO ARTIST” is displayed.

(Song title display)

When the display button (

) is

pressed while in artist name display
mode, it changes to the song title
display mode.

To display the rest of the characters of
the song title, press the text button
(

). The display scrolls the next

eight characters. Press the text button
(

) again after the last eight

characters have been displayed to
return to the beginning of the title.

Three more seconds after scrolling the
song title, the display automatically
returns to display the first part of the
song title.

If there is no song title,

“NO SONG” is

displayed.

(INFO (such as composer's name)
display)

When the display button (

) is

pressed while in song title display
mode, it changes to the INFO display
mode.

To display the rest of the characters of
the composer's name, press the text
button (

). The display scrolls the

next eight characters. Press the text
button (

) again after the last

eight characters have been displayed to
return to the beginning of the title.

Three seconds after scrolling the text,
the display automatically returns to
display the first part of the text.

If there is no composer name,

“NO INFO” is displayed.

6-46

Interior Comfort

Audio System

Instant replay

This function allows you to rewind and
replay the program that you were
previously or are currently listening to.
Press the instant replay button (

When the seek tuning button (

) is

pressed (about 1.5 seconds), playback
starts from the beginning of the current
program.
When the seek tuning button (

) is

pressed twice, playback starts from the
beginning of the previous program.
When the seek tuning button (

) is

pressed for about 1.5 seconds or longer,
the program is reversed while the button
is being pressed.
When the seek tuning button (

) is

pressed (about 1.5 seconds), playback
starts from the beginning of the next
program. When the seek tuning button
(

) is pressed (about 1.5 seconds) while

the last program is being played, the
instant replay mode is cancelled.
When the seek tuning button (

) is

pressed for 1.5 seconds or longer, the
program is fast-forwarded while the
button is being pressed. When pressing
and holding the button until the end of the
program, the instant replay mode is
cancelled.
When the instant replay button (

) is

pressed again, playback is paused, or
playback starts if it has been paused.
Instant replay (PAUSE)
If the instant replay button (

) is

pressed while the instant replay mode is
off, instant replay mode is turned on in a
paused condition (PAUSE). Press the
instant replay button (

) again to

resume playback from the point at which
it was paused.

NOTE

If the channel is changed, the instant replay
buffer data is deleted.

After turning on the power and switching to
SIRIUS digital satellite radio mode, the
instant replay mode is not available for
several seconds after changing channels.

Initialization of ID code

If the registered ID code is forgotten,
return the ID code to the default [0000] by
performing the following steps:
Setting condition: SAT mode

NOTE

The scan button refers to the operation for an
In-dash CD changer-equipped vehicle, and the
auto memory button refers to the operation for
a CD player-equipped vehicle.

(Master code input preparation)

1. Press and hold the auto memory button

or scan button (

), then press

channel preset button 4. Hold both
buttons together for 1.5 seconds.

“ENTER PIN” appears for three
seconds which indicates that it is in
code input mode.

“SR1 - - - -” appears, which indicates
that it is ready for code input.

(Master code input)

4. Input the master code using the channel

preset buttons 1-4.
(The master code is already set at the
time of factory shipment.)

(Master code input determination)

5. Determine the master code which has

been input by pressing the auto
memory button or scan button (

Interior Comfort

Audio System

6-47

“PIN CLEARED” appears which
indicates that the master code input has
been completed.

7. The ID code is set to the default [0000]

and the initialization process is
completed.

NOTE

Master code:
The Master Code is used to initialize or re-
initialize the ID code in the event that the code
is not set to [0000] and/or the personalized ID
code is not known. The initialization process
resets the ID code to [0000]. The master code
can potentially defeat the intent of the security
of the parental lock if it is located by persons
not authorized by the owner to access certain
channels.

SIRIUS Satellite Radio Master Code: [0913]

NOTE

When a numeric value other than the
master code is input and the auto memory
button or scan button (

) is pressed,

“SR1 Err” is displayed and then it returns
to the

“SR1 - - - -” display again.

If an ID code is not input for ten seconds,
“Err” is displayed and it returns to the
former display.

Channel preset buttons 1, 2, 3, 4 and the
auto memory button or scan button (

)

are used for inputting the ID code. Buttons
5 and 6 cannot be used.

Change of ID code

Setting condition: SAT mode
When changing the ID code, the new ID
code is input after the previous one is
input first.

NOTE

The scan button refers to the operation for an
In-dash CD changer-equipped vehicle, and the
auto memory button refers to the operation for
a CD player-equipped vehicle.

(Registered ID code input)

1. Press and hold the auto memory button

or scan button (

), then press

channel preset button 5. Hold both
buttons together for 1.5 seconds.

“ENTER PIN” appears for three
seconds which indicates that it is in
code input mode.

“SR1 - - - -” appears, which indicates
that it is ready for code input.

4. Input the registered ID code using

channel preset buttons 1-4.
Example: When the registered ID code
is

“2323”, input “2323”. At this time

“SR1 2323” is displayed.
Press 1 for the first digit, 2 for the
second, 3 for the third, and 4 for the
last digit. For example, if your number
is 2323, press 1 three times (includes
0), 2 four times, 3 three times, and 4
four times. If the display goes off while
inputting, begin from Step 1.

NOTE

The registered ID code is the default [0000] at
the time of factory shipment. If [0000] results
in

“Err” on the display, go to the

“INITIALIZATION OF ID CODE” section to
reset to [0000].

(Verification with the registered ID
code)

5. Determine the input code by pressing

the auto memory button or scan button
(

6-48

Interior Comfort

Audio System

6. If it does not match with the previously

registered code,

“SR1 Err” is displayed

and then it returns to

“SR1 - - - -”.

7. If it matches with the previously

registered code,

“ENTER PIN” appears

again and it switches to code input
mode.

“SR1 - - - -” appears, and it is ready for
input of the new ID code.

(New ID code input)

9. Input the new ID code using channel

preset buttons 1-4.
Example: If

“1234” is input as the new

code,

“SR1 1234” is displayed.

(New ID code input determination)

10. Determine the new ID code which

has been input by pressing the auto
memory button or scan button
(

11.

“PIN CHANGED” appears for three
seconds which indicates that the new
ID code input has been completed.

12. It returns to the former display.

NOTE

If an ID code is not input for ten seconds,
“Err” is displayed and it returns to the
former display.

Channel preset buttons 1, 2, 3, 4 and the
auto memory button or scan button (

)

are used for input of the ID code. Buttons 5
and 6 cannot be used.

Individual channel locking

If a channel is locked, the channel is
muted.

NOTE

If the registered ID code is forgotten, return
the ID code to the default [0000]. (See
“INTIALIZATION OF ID CODE” section)

The scan button refers to the operation for
an In-dash CD changer-equipped vehicle,
and the auto memory button refers to the
operation for a CD player-equipped
vehicle.

(Locking a channel)

1. Select a channel to be locked by

turning the manual tuning dial.
Example: Select channel 100

(Registered ID code input preparation)

2. Press and hold the auto memory button

or scan button (

), then press

channel preset button 6. Hold both
buttons together for 1.5 seconds.

“ENTER PIN” appears for three
seconds which indicates that it is in
code input mode.

“SR1 - - - -” appears which indicates
that it is ready for code input.

(Registered ID code input)

5. Input the registered ID code using

channel preset buttons 1-4. Example: If
the registered ID code is

“2323”, input

“2323”. At this time “SR1 2323” is
displayed.

(Registered ID code input
determination)

6. Determine the code which has been

input by pressing the auto memory
button or scan button (

7. If it does not match the registered code,

“SR1 Err” is displayed and then it
returns to

“SR1 - - - -”.

Interior Comfort

Audio System

6-49

8. If it matches the registered code,

“SR1 LOCK” appears for three
seconds which indicates that the code
input has been completed.

“SR1 LOCK 100” appears which
indicates that the parental lock is
activated. At this time, mute is on and
no sound is heard.

NOTE

If an ID code is not input for ten seconds,
“Err” is displayed and it returns to the
former display.

Channel preset buttons 1, 2, 3, 4 and the
auto memory button or scan button (

)

are used for input of the ID code. Buttons 5
and 6 cannot be used.

Lock cancellation

Setting condition: SAT mode

NOTE

The scan button refers to the operation for an
In-dash CD changer-equipped vehicle, and the
auto memory button refers to the operation for
a CD player-equipped vehicle.

(Releasing a locked channel)

1. Select a channel to be released by

turning the manual tuning dial.
Example: Select the locked channel
(i.e. 100). At this time,

“SR1 LOCK 100” is displayed.

(Registered ID code input preparation)

2. Press and hold the auto memory button

or scan button (

), then press

channel preset button 6. Hold both
buttons together for 1.5 seconds.

“ENTER PIN” appears for three
seconds which indicates that it is in
code input mode.

“SR1 - - - -” appears, which indicates
that it is ready for code input.

(Registered ID code input)

5. Input the registered ID code using

channel preset buttons 1-4. Example:
When the registered ID code is

“2323”,

input

“2323”. At this time “SR1 2323”

is displayed.

NOTE

“Err” is displayed, go to the

“INITIALIZATION OF ID CODE” section to
reset the ID code to [0000].

(Registered ID code input
determination)

6. Determine the input code by pressing

the auto memory button or scan button
(

7. If it does not match the registered code,

“SR1 Err” is displayed and then it
returns to

“SR1 - - - -”.

8. If it matches the registered code,

“SR1 UNLOCK” appears for three
seconds which indicates that the code
input has been completed.

“SR1 100” appears which indicates that
the parental lock is off. At this time,
sound is heard.

NOTE

If an ID code is not input for ten seconds,
“Err” is displayed and it returns to the
former display.

Channel preset buttons 1, 2, 3, 4 and the
auto memory button or scan button (

)

are used for input of the ID code. Buttons 5
and 6 cannot be used.

6-50

Interior Comfort

Audio System

qOperating the Compact Disc (CD) Player

Track down/Reverse button

Track up/Fast-
forward button

CD eject button

CD slot

CD play button

Display button

Folder
down button

Folder up
button

Random button

Repeat button

Text button

Load button

Scan button

Play/Pause button

Type

Playable data

Music/MP3/WMA CD
player

Music data (CD-DA)

MP3/WMA file

NOTE

If a disc has both music data (CD-DA) and
MP3/WMA files, playback of the two or three
file types differs depending on how the disc
was recorded.

Inserting the CD

Insert the CD into the slot, label-side up.
The auto-loading mechanism will set the
CD and begin play.

NOTE

There will be a short lapse before play begins
while the player reads the digital signals on
the CD.

Ejecting the CD

Press the CD eject button (

) to eject the

CD.

Playback

Press the CD play button (

) to start

play when a CD is in the unit.
If a CD is not in the unit when the CD
play button (

) is pressed,

“NO DISC”

will flash on and off.

NOTE

When the load button (

) is pressed, the

CD will load and play even if the CD eject
button (

) had been previously pressed.

Pause

To stop playback, press the Play/Pause
button (

Press the button again to resume
playback.

6-52

Interior Comfort

Audio System

Fast-forward/Reverse

Press and hold the fast-forward button
(

) to advance through a track at high

speed.
Press and hold the reverse button (

) to

reverse through a track at high speed.

Track search

Press the track up button (

) or turn the

file dial clockwise once to skip forward to
the beginning of the next track.
Press the track down button (

) or turn

the file dial counterclockwise once to skip
back to the beginning of the current track.

Folder search (during MP3/WMA CD
playback)

To change to the previous folder, press the
folder down button (

), or press the

folder up button (

) to advance to the

next folder.

Music scan

During music CD playback

This function scans the titles on a CD and
plays 10 seconds of each song to aid you
in finding a song you want to listen to.

During MP3/WMA CD playback

This function scans the titles in a folder
currently being played and plays 10
seconds of each song to aid you in finding
a song you want to listen to.

Press the scan button (

) during

playback to start the scan play operation
(the track number will flash).
Press the scan button (

) again to

cancel scan playback.

NOTE

If the unit is left in scan, normal playback will
resume where scan was selected.

Repeat playback

During music CD playback

1. Press the repeat button (

) during

playback to play the current track
repeatedly.

“RPT” is displayed.

2. Press the button again to cancel the

repeat playback.

During MP3/WMA CD playback

(Track repeat)

1. Press the repeat button (

) during

playback to play the current track
repeatedly.

“TRACK RPT” is

displayed.

2. To cancel the repeat playback, press the

button again after 3 seconds.

(Folder repeat)

1. Press the repeat button (

) during

playback, and then press the button
again within 3 seconds to play the
tracks in the current folder repeatedly.

“FOLDER RPT” is displayed.

2. Press the button again to cancel the

repeat playback.

Random playback

Tracks are randomly selected and played.

During music CD playback

1. Press the random button (

) during

playback to play the tracks on the CD
randomly.

“RDM” is displayed.

2. Press the button again to cancel the

random playback.

Interior Comfort

Audio System

6-53

During MP3/WMA CD playback

(Folder random)

1. Press the random button (

) during

playback to play the tracks in the folder
randomly.

“FOLDER RDM” is

displayed.

2. To cancel the random playback, press

the button again after 3 seconds.

(CD random)

1. Press the random button (

) during

playback, and then press the button
again within 3 seconds to play the
tracks on the CD randomly.

“DISC RDM” is displayed.

2. Press the button again to cancel the

random playback.

Switching the display

For files with a file name and other
information that have been input, the
display switches between display of the
file name and other information each time
the display button (

) is pressed during

playback.
Music CD

Track number/Elapsed time

Track name

Track number

Album name

Artist name

MP3/WMA CD

File name

Folder name

Album name (ID3 Tag)

Song name (ID3 Tag)

Artist name (ID3 Tag)

Folder number/File number

File number/Elapsed time

NOTE

The information viewable in the display is
only CD information (such as artist name,
song title) which has been recorded to the
CD.

The system can only display one-byte
alphabetic characters. If two-byte or other
types of characters have been recorded to
the CD, they may not display correctly.

Display scroll

Only 8 characters (File name) or 12
characters (Except file name) can be
displayed at one time. To display the rest
of the characters of a long title, press the
text button (

). The display scrolls

the next 12 characters. Press the text
button (

) again after the last 12

characters have been displayed to return
to the beginning of the title.

6-54

Interior Comfort

Audio System

Mazda Mazdaspeed 3 (2013 year). Instruction - part 18