|
|
ENGINE 28 OVERHAUL 6. From all of the readings obtained, determine highest protrusion figure and select the NOTE: Identification holes are located on 7. Remove DTI. all pistons are half-way up cylinder bores. Cylinder head - refit 1. Ensure that mating faces of cylinder head and block are clean and dry and that 2 locating 2. Lubricate threads of new cylinder head bolts with engine oil. 3. Check that cylinder head bolt holes in cylinder block are clean and dry. 4. Rotate crankshaft in a clockwise direction until pistons are half-way up cylinder bores. 5. Position the selected cylinder head gasket on cylinder block ensuring that word "TOP" is 6. Using assistance, fit cylinder head ensuring that it is located on dowels. |