|
|
Electronic Engine Controls - I6 3.2L Petrol - Heated Oxygen Sensor (HO2S) Removal and Installation Special Tool(s) 310-121 Removal Remove the engine cover. Refer to: Engine Cover - I6 3.2L Petrol (501-05 Interior Trim and Ornamentation, Removal and Installation). 1. 2. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle. 2. Disconnect the heated oxygen sensors (HO2S) electrical connectors. 3. Using the special tool, remove the heated oxygen Special Tool(s): 310-121 4. Installation For H02S anti-seize compound information, refer to the specification 1. 2. CAUTION: Make sure the anti-seize compound does not contact the HO2S tip. Apply anti-seize compound to the sensor threads. 2. Install the HO2S. Special Tool(s): 310-121 Torque: 45 Nm 3. Connect the HO2S electrical connector. 4. Install the engine cover. 5. |