|
|
FRONT SUSPENSION 1 REPAIR SELF LOCKING NUTS WARNING: Where self locking nuts are PANHARD ROD Service repair no - 60.10.07. Remove 1. Remove fixings at mounting arm. flexible bushes. Ensure tubing locates on outer Refit 5. Fit replacement bushes. CAUTION: Apply pressure to outer edge of 6. Fit panhard rod to axle bracket and mounting arm. Tighten fixings to 88 Nm (65 lbf/ft). RADIUS ARM Service repair no - 60.10.16. Remove 1. Loosen road wheel retaining nuts. and remove wheel. 3. Support front axle weight with jack. fixings. 5. Disconnect track rod at ball joint. |