|
|
Content .. 1322 1323 1324 1325 ..
-> No GO to Pinpoint Test G240121t174.
G240121t174 : CHECK THE TV RGB SIGNAL GROUND HARNESS FOR SHORT 1. Measure the voltage between TL20, pin 11 (W) and GROUND. •
Is the voltage greater than 3 volts? -> Yes GO to Pinpoint Test G240121t177.
-> No GO to Pinpoint Test G240121t178.
G240121t175 : CHECK THE CIRCUIT BETWEEN CC11 AND INTERMEDIATE 1. Disconnect intermediate connector, CC02. 2. Measure the resistance between CC11, pin 01 (W) and CC02, pin 16 (W). •
Is the resistance greater than 5 ohms? -> Yes INSTALL a new harness between CC02 and CC11. TEST the system for normal operation.
-> No INSTALL a new harness between CC02 and TL20. TEST the system for normal operation. G240121t176 : CHECK THE CIRCUIT BETWEEN CC11 AND INTERMEDIATE 1. Disconnect intermediate connector, CC02. 2. Measure the resistance between CC11, pin 01 (W) and GROUND. •
Is the resistance less than 10,000 ohms? -> Yes INSTALL a new harness between CC02 and CC11. TEST the system for normal operation.
-> No INSTALL a new harness between CC02 and TL20. TEST the system for normal operation. |