|
|
51410 51412 51411 51413 51414 51415 Figure 46 Figure 47 Figure 48 Figure 49 Figure 50 Figure 51 Remove the screws (1) securing the plates (2). Take out the plates (2). Turn over the transmission. Using a suitable punch, remove the ball bearing (1). Using the percussion extractor 99340205 (1) and part Clamp the main shaft (1) in a vice. Remove the roller bearing rd -4 th gear from the hub (5) and, taking care as the plugs (8) come out with their relative balls (9) and Remove the retaining ring (4, Figure 44). Extract the hub (2) Remove the synchronizer ring (1), 3 rd gear (2) and roller bearing (3). Disassembling the main shaft Mark the assembly position of each synchronizing NOTE 34 5 S 300 TRANSMISSIONS D AILY E URO 4 |