Index Isuzu Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross - service repair manual 1999-2002 year
|
|
4C–20 DRIVE SHAFT SYSTEM Disassembly 1. Remove filler plug and gasket, drain oil. front axle drive shaft from front axle case. 3. Remove actuator assembly and draw out actuator ASM. 4. Remove housing. ring pliers. 412RW017 8. Take out inner shaft from front axle case. pliers. 412RW016 10. Remove inner shaft bearing. NOTE: Be careful not to damage the shaft. 412RW015 11. Remove needle bearing from inner shaft by using a remover J–26941 and sliding hammer J–2619–01. 412RS045 12. Remove oil seal from front axle case. NOTE: Be careful not to damage the front axle case. |