|
|
Engine Control System (4JH1) 6E-51 P0500 (B) 24 OFF Vehicle Speed • The ignition switch is ON. • The engine speed is higher than 3600 • The fuel injection quantity is more • The ECM detects that the vehicle • Meter (10A) fuse (F-16) open. • Sensor ignition voltage circuit is open circuit or • Sensor signal circuit is open circuit, high • Sensor low reference circuit is open circuit or • Poor harness connector connection. • Faulty instrument panel cluster (meter • Faulty VSS. P0560 (1) 35 OFF System Voltage — • The ECM detects that the battery • Incorrect “Jump Starting”. • Faulty charging system. P0560 (2) 35 OFF System Voltage — • The ECM detects that the battery • Faulty charging system. circuit is high resistance. • Faulty ECM. P0560 (A) 35 OFF System Voltage — • The PCU battery voltage feed circuit • Incorrect “Jump Starting”. • Faulty charging system. ground circuit is high • Faulty PCU. P0561 (A) 18 OFF Ignition Switch — • The ECM detects that the ignition • ECM main relay control circuit is short to ground. • Ignition voltage feed circuit is intermittently • Faulty ignition switch. P0561 (B) 18 OFF Ignition Switch — • The ECM detects internal ignition • Faulty ECM. P0602 (25) – ON Control Module — • VIN in the ECM is not programmed. • VIN is not programmed. DTC (Symptom Code) Flash MIL Status DTC Name on Tech 2 Condition for Running the DTC Condition for Setting the DTC Possible Cause |