|
|
Content .. 1054 1055 1056 1057 ..
CAB AND CHASSIS ELECTRICAL 8-329 Installation 1. Bleed the air from brake and clutch fluid pipe line. in specified level. 3. Check to see if brake warning light comes on when starter switch is turned on and then warning light Parking Brake Indicator Light The parking brake indicator light is connected in series Notice: 1. Disconnect the parking brake switch connector. ground. 3. Check to see if the indicator light comes on with the starter switch “ON”. Parking Brake Switch Inspection 1. Disconnect the parking brake switch connector. switch terminal and the body ground with the circuit Repair the parking brake switch or replace it when the Removal 1. Parking Brake Switch 1) Disconnect the connector. N8A0361E When parking brake applied Continuity When parking brake released No continuity N8A0362E N8A0363E |