|
|
SRS242 3. Connect red clip of deployment tool to battery positive termi- 4. The lamp on the right side of the tool, marked “deployment tool 5. Press the button on the deployment tool. The left side lamp on CAUTION: When deploying the seat belt pre-tensioner, stand at least 5 m DEPLOYMENT OF AIR BAG MODULE AND SEAT BELT NHRS0022S03 When disposing of a vehicle, deploy air bag module and seat belt CAUTION: When deploying air bag module or seat belt pre-tensioner, Disconnect both the vehicle battery cables and wait 3 minutes. 2. Disconnect air bag module and seat belt pre-tensioner connec- 3. Connect deployment tool [SST: KV99106400 (J38381)] to air SRS006-C 4. Connect red clip of deployment tool to battery positive termi- 5. The lamp on the right side of the tool, marked “deployment tool 6. Press the button on the deployment tool. The left side lamp on CAUTION: Activate only one air bag module or seat belt pre-tensioner at SBF276H DISPOSING OF AIR BAG MODULE AND SEAT BELT NHRS0022S04 Deployed air bag module and seat belt pre-tensioner are very hot. CAUTION: I Never apply water to a deployed air bag module and seat I Be sure to wear gloves when handling a deployed air bag GI MA EM LC EC FE AT AX SU BR ST BT HA SC EL IDX SUPPLEMENTAL RESTRAINT SYSTEM (SRS) Disposal of Air Bag Module and Seat Belt Pre-tensioner (Cont’d) RS-33 |