|
|
COMBINATION METERS DI-7 C D E F G H I J L M A B DI Setting Procedure of Shift-up Engine Speed (rpm) Setting of shift-up engine speed with odo/trip meter. 1. Push odo/trip switch (for less than 1 sec.) to change trip meter display to “trip A” → “trip B” → shift-up indi- cator mode. 2. Keep pressing odo/trip switch (for more than 1 sec.), then release odo/trip switch (display flashes and 3. Set according to the following. a. Keep pressing odo/trip switch (for more than 1 sec.): Increase setting engine speed by 500 rpm. b. Push odo/trip switch (for less than 1 sec.): Increase setting engine speed by 100 rpm. 4. Stop the flash when not pushing odo/trip switch for more than 5 sec. (Shift-up engine speed is set.) NOTE: SKIB3748E |