|
|
P0442 EVAP CONTROL SYSTEM EC-897 < DTC/CIRCUIT DIAGNOSIS > [VK50VE] C D E F G H I J K L M A EC N P O YES >> GO TO 13. NO >> Repair or reconnect the hose. 13. CHECK EVAP CANISTER PURGE VOLUME CONTROL SOLENOID VALVE EC-903, "Component Inspection" Is the inspection result normal? YES >> GO TO 14. NO >> Replace EVAP canister purge volume control solenoid valve. 14. CHECK FUEL TANK TEMPERATURE SENSOR EC-850, "Component Inspection" Is the inspection result normal? YES >> GO TO 15. NO >> Replace “fuel level sensor unit and fuel pump”. 15. CHECK EVAP CONTROL SYSTEM PRESSURE SENSOR EC-917, "Component Inspection" Is the inspection result normal? YES >> GO TO 16. NO >> Replace EVAP control system pressure sensor. 16. CHECK EVAP PURGE LINE Check EVAP purge line (pipe, rubber tube, fuel tank and EVAP canister) for cracks or improper connection. . Is the inspection result normal? YES >> GO TO 17. NO >> Repair or reconnect the hose. 17. CLEAN EVAP PURGE LINE Clean EVAP purge line (pipe and rubber tube) using air blower. >> GO TO 18. 18. CHECK EVAP/ORVR LINE Check EVAP/ORVR line between EVAP canister and fuel tank for clogging, kinks, looseness and improper Is the inspection result normal? YES >> GO TO 19. NO >> Repair or replace hoses and tubes. 19. CHECK RECIRCULATION LINE Check recirculation line between filler neck tube and fuel tank for clogging, kinks, cracks, looseness and Is the inspection result normal? YES >> GO TO 20. NO >> Repair or replace hose, tube or filler neck tube. 20. CHECK REFUELING EVAP VAPOR CUT VALVE EC-1124, "Component Inspection" . Is the inspection result normal? YES >> GO TO 21. NO >> Replace refueling EVAP vapor cut valve with fuel tank. 21. CHECK FUEL LEVEL SENSOR MWI-62, "Component Inspection" . Is the inspection result normal? YES >> GO TO 22. |