|
|
and the J 45754-2 with the inner pinion bearing cup is evenly seated over the inner pinion bearing cup 6. Turn the forcing screw clockwise slowly in order to draw the outer pinion bearing cup into the outer pinion bearing cup bore. Inspect the position of the outer pinion bearing cup as it is being drawn into the outer pinion bearing cup 7. Tighten the forcing screw until the outer pinion bearing cup is seated in the outer pinion bearing cup bore. 8. Remove the J 45754 . See Special Tools and Equipment .
2004 Hummer H2 2004 DRIVELINE/AXLE Front Drive Axle - Hummer H2
|