|
|
Fig. 19: Passenger Door Lock & Side Window Switch 1. Connect the electrical connector to the door lock and side window switch. 2. Align the switch with the opening in the door panel. Press to seat the switch. 3. Program the keyless entry transmitters if the module has been replaced. Refer to Transmitter Programming in Keyless Entry. HANDLE BEZEL REPLACEMENT - INSIDE Removal Procedure 1. Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door or Trim Panel Replacement - Side Rear Door . 2. Place the door trim panel, back-side up, on a clean prepared non-abrasive surface.
2004 Hummer H2 2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
|