|
|
POWER WINDOW INOPERATIVE - DRIVER DOOR Power Window Inoperative - Driver Door Replace the body control module. Refer to Body Go to Step 16 - 13 Replace the passenger door module. Refer to IMPORTANT: Perform the set up procedure for the passenger Go to Step 16 - 14 Replace the driver door module. Refer to Switch IMPORTANT: Perform the set up procedure for the driver door Go to Step 16 - 15 Replace the rear power window switch. Refer to Go to Step 16 - 16 Operate the system in order to verify the repair. System OK Go to Step 2 Step Action Yes No Schematic Reference: Power Window Schematics 1 Did you perform the Door Systems Diagnostic Go to Step 2 Go to Diagnostic System Check - Door Systems 2 Operate the driver power window in the UP and Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems Go to Step 3 3 1. Install a scan tool. 2. Monitor the driver window status data parameter in the driver door inputs list. Does the driver window status data parameter
2004 Hummer H2 2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
|