|
|
Content .. 2389 2390 2391 2392 ..
A/C Clutch Displays On or Off. This parameter indicates the commanded state of the A/C control relay. The clutch Commanded Gear Displays 1, 2, 3 or 4. This parameter indicates the current commanded gear. Cruise Displays Enabled or Disabled. This parameter indicates whether the PCM is allowing cruise operation. Current TAP Cell The Current Transmission Adaptive Pressure Cell parameter indicates the current TAP cell in use for ECT The Engine Coolant Temperature parameter is the input signal of the engine coolant temperature sensor. Engine Run Time This parameter measures how long the engine has been operating. When the ignition switch is turned Engine Speed This parameter indicates the rotational speed of the engine expressed as revolutions per minute. Engine Torque This parameter indicates the amount of torque that is delivered from the engine. Estimated Gear Ratio This parameter indicates the estimated turbine speed divided by the transmission output speed. Estimated Ignition Voltage
2004 Hummer H2 2004 TRANSMISSION Automatic Transaxle, 4L60-E/4L65-E (Diagnostic Information & Procedures) - Hummer H2
|