Honda Odyssey (2023 year). Manual in english - page 13

206

uu

Operating the Switches Around the Steering Wheel

u

Driving Position Memory System

*

Co
ntrols

Driving Position Memory System

*

You can store two driver’s seat positions (except for power lumbar) and outside 
mirror positions with the driving position memory system.
When you unlock and open the driver’s door with a remote, the seat and outside 
mirrors adjust automatically to one of the two preset positions.

When you enter the vehicle, the driver information interface briefly shows you which 
remote transmitter you used to unlock the vehicle.

•

DRIVER 1

 transmitter is linked to memory button 1.

•

DRIVER 2

 transmitter is linked to memory button 2.

The driver’s seat moves rearward depending 
on the set seating position once you

•

Stop the vehicle.

•

Put the transmission in 

(

P

.

•

Set the power mode to VEHICLE OFF.

•

Open the driver’s door.

Once the power mode is in the ACCESSORY 
position, the driver’s seat moves to the 

DRIVER 1

 or 

2

 preset position.

1

Driving Position Memory System

*

Using the audio/information screen, you can disable 
the automatic seat and door mirrors adjustment 
function.

2

Customized Features

 P. 413

The driver’s seat easy exit feature:

•

Will move rearward to allow you to more easily exit 
the vehicle.

•

Can be turned on or off.

2

Customized Features

 P. 413

System Operation

The system will not operate if:

•

Either memory button is pressed while the seat is in 
motion.

•

The seat position is adjusted while in operation.

•

Either of the memorized positions is set fully to the 
rear.

The system may not recognize a key if:

•

The key is in close proximity to a cell phone or other 
wireless device.

•

Both keys are in the vehicle at the same time.

•

The Driving Position Memory System is disabled in 
customized features.

•

Opening driver’s door without fully grabbing door 
handle.

DRIVER 1

DRIVER 2

* Not available on all models

207

uu

Operating the Switches Around the Steering Wheel

u

Driving Position Memory System

*

Co
ntrols

1.

Set the power mode to ON. Adjust the 
driver’s seat and the door mirrors to the 
desired position.

2.

Press the 

SET

 button.

u

You will hear the beep, and the memory 
button indicator light will blink.

3.

Press and hold memory button 

(

1

 or 

(

2

 

within five seconds of pressing the 

SET

 

button.

u

Once the seat and the outside mirrors 
position has been memorized, the 
indicator light on the button you pressed 
stays on.

1.

Put the transmission into 

(

P

.

2.

Apply the parking brake.

3.

Press a memory button (

(

1

 or 

(

2

).

u

You will hear the beeper, and the 
indicator light will blink.

The seat and the door mirrors will 
automatically move to the memorized 
position. When it has finished moving, you 
will hear the beep, and the indicator light 
stays on.

■

Storing a Position in Memory

1

Storing a Position in Memory

After you press the 

SET

 button, the storing operation 

will be canceled when:

•

You do not press the memory button within five 
seconds.

•

You readjust the seat and door mirrors position 
before the double-beep.

•

You set the power mode to any position except 
ON.

Memory 
Button 1

Memory 
Button 2

SET

 Button

■

Recalling the Stored Position

1

Recalling the Stored Position

The seat and the door mirrors will stop moving if you:

•

Press the 

SET

 button or memory button 

(

1

 or 

(

2

.

•

Adjust the seat position or door mirrors.

•

Put the transmission into a position other than 

(

P

.

Memory 
Button 1

Memory 
Button 2

SET

 Button

208

uu

Operating the Switches Around the Steering Wheel

u

Adjusting the Steering Wheel

Co
ntrols

Adjusting the Steering Wheel

The steering wheel height and distance from your body can be adjusted so that you 
can comfortably grip the steering wheel in an appropriate driving posture.

1.

While the vehicle is stopped, push the 
steering wheel adjustment lever down.

u

The steering wheel adjustment lever is 
under the steering column.

2.

Move the steering wheel up or down, and 
in or out.

u

Make sure you can see the instrument 
panel gauges and indicators.

3.

Pull the steering wheel adjustment lever up 
to lock the steering wheel in position.

u

After adjusting the position, make sure 
you have securely locked the steering 
wheel in place by trying to move it up, 
down, in, and out.

1

Adjusting the Steering Wheel

3

WARNING

Adjusting the steering wheel position while 
driving may cause you to lose control of the 
vehicle and be seriously injured in a crash.

Adjust the steering wheel only when the 
vehicle is stopped.

To adjust

To lock

Lever

209

Co
ntrols

Mirrors

Interior Rearview Mirror

Adjust the angle of the rearview mirror when you are sitting in the correct driving 
position.

Flip the tab to switch the position.
The night position will help reduce the glare 
from headlights behind you when driving 
after dark.

When you are driving after dark, the 
automatic dimming rearview mirror and 
power door mirrors

*

 reduces the glare from 

headlights behind you. Press the auto button 
to turn this function on and off. When 
activated, the auto indicator comes on.

■

Rearview Mirror with Day and Night Positions

*

1

Mirrors

Keep the inside and outside mirrors clean and 
adjusted for best visibility.

Adjust the mirrors before you start driving.

2

Front Seats

 P. 212

Tab

Daytime 
Position

Night Position

■

Automatic Dimming Rearview Mirror

*

 and Power Door 

Mirrors

*

1

Automatic Dimming Rearview Mirror

*

 and Power Door Mirrors

*

The auto dimming function cancels when the 
transmission is in 

(

R

.

Sensor

Auto Button

* Not available on all models

210

uu

Mirrors

u

Power Door Mirrors

Co
ntrols

Power Door Mirrors

You can adjust the door mirrors when the 
power mode is in ON.

■

Mirror position adjustment

L/R selector switch: 

Select the left or right 

mirror. After adjusting the mirror, return the 
switch to the center position.

Mirror position adjustment switch: 

Press 

the switch left, right, up, or down to move the 
mirror.

■

Folding door mirrors

*

Press the folding button to fold in and out the 
door mirrors.

Selector 
Switch

Adjustment 
Switch

Folding 
Button

*

* Not available on all models

211

uu

Mirrors

u

Power Door Mirrors

Co
ntrols

If activated, either side door mirror 
automatically tilts downward when you put 
the transmission into 

(

R

; this improves close-

in visibility on the selected side of the vehicle 
when backing up. The mirror automatically 
returns to its original position when you take 
the transmission out of 

(

R

.

To activate this feature, set the power mode 
to ON and slide the selector switch to the left 
or right side.

■

Reverse Tilt Door Mirror

*

Selector Switch

* Not available on all models

212

Co
ntrols

Seats

Front Seats

Adjust the driver’s seat as far back as possible 
while allowing you to maintain full control of 
the vehicle. You should be able to sit upright, 
well back in the seat and be able to 
adequately press the pedals without leaning 
forward, and grip the steering wheel 
comfortably. The passenger’s seat should be 
adjusted in a similar manner, so that it is as far 
back from the front airbag in the dashboard 
as possible.

1

Seats

Always make seat adjustments before driving.

1

Front Seats

The National Highway Traffic Safety Administration 
and Transport Canada recommend that drivers allow 
at least 10 inches (25 cm) between the center of the 
steering wheel and the chest.

3

WARNING

Sitting too close to a front airbag can result 
in serious injury or death if the front 
airbags inflate.

Always sit as far back from the front 
airbags as possible while maintaining 
control of the vehicle.

Move back.

Allow sufficient 
space.

■

Adjusting the Seat Positions

Horizontal 
Position 
Adjustment

Height 
Adjustment 
(Driver’s seat 
only)

Seat-back 
Angle 
Adjustment

213

uu

Seats

u

Front Seats

Continued

Co
ntrols

■

Lumbar Support Adjustment Switch

*

Press the top: 

To move the lumbar support 

up.

Press the bottom: 

To move the lumbar 

support down.

Press the front: 

To increase the entire 

lumbar support.

Press the rear: 

To decrease the entire lumbar 

support.

Lumbar 
Support 
Adjustment 
Switch

* Not available on all models

uu

Seats

u

Front Seats

214

Co
ntrols

Adjust the driver’s seat-back to a comfortable, 
upright position, leaving ample space 
between your chest and the airbag cover in 
the center of the steering wheel.

The front seat passenger should also adjust 
their seat-back to a comfortable, upright 
position.

Reclining a seat-back so that the shoulder part of the belt no longer rests against the 
occupant’s chest reduces the protective capability of the belt. It also increases the 
chance of sliding under the belt in a crash and being seriously injured. The farther a 
seat-back is reclined, the greater the risk of injury.

■

Adjusting the Seat-Backs

1

Adjusting the Seat-Backs

Do not put a cushion, or other object, between the 
seat-back and your back.

Doing so may interfere with proper seat belt or airbag 
operation.

If you cannot get far enough away from the steering 
wheel and still reach the controls, we recommend 
that you investigate whether some type of adaptive 
equipment may help.

3

WARNING

Reclining the seat-back too far can result in 
serious injury or death in a crash.

Adjust the seat-back to an upright position, 
and sit well back in the seat.

215

uu

Seats

u

Second Row Seats

Continued

Co
ntrols

Second Row Seats

■

Adjusting the Seat Positions

1

Second Row Seats

3

WARNING

An unsecured seat or seat-back can move 
out of position or collapse without warning 
if there is sudden acceleration or stop or in 
a crash.

A seat or seat-back that suddenly moves or 
collapses can result in severe injury or 
death.

Always make sure all seats and seat-backs 
are securely locked into position before 
driving.

1

Adjusting the Seat Positions

Once the desired seat position and seat-back angles 
are made, rock the seat-back and forth to make sure 
they are locked into position.

Second row center 
seat

Second row outer 
seat

Seat-back Angle 
Adjustment

Pull up the strap to 
change the angle.

Seat-back 
Angle 
Adjustment

Pull up the 
lever to change 
the angle.

Second row 
outer seat

Horizontal Position 
Adjustment

Pull up the bar to 
move the seat, then 
release the bar.

uu

Seats

u

Second Row Seats

216

Co
ntrols

1.

Pull up the armrest(s).

2.

Lower the head restraint to its lowest 
position.

3.

Move the seat to its rearmost position.

4.

Pull the seat-back angle adjustment lever, 
then fold the seat-back down.

To return the seat to the original position, pull 
up the seat-back angle adjustment lever and 
fold the seat-back in the upright position.

1.

Pulling forward on the walk-in lever or 
pulling the release strap tilts the second row 
outer seat’s seat-back forward.

u

The whole seat slides forward.

2.

When re-positioning the seat, push it firmly 
to the rear to ensure the horizontal 
adjusters and the seat-back lock completely 
into place.

■

Folding Down the Second Row Outer Seat

1

Folding Down the Second Row Outer Seat

Make sure that the folded seat-back does not press 
against the front passenger’s seat, as this can cause 
the weight sensors in the front passenger’s seat to 
work improperly.

2

Passenger Airbag Off Indicator

 P. 64

The front seat(s) must be far enough forward so they 
do not interfere with the second row seats as they 
fold down.

Make sure the seat-back and seat cushion are 
securely latched back into place before driving.

Seat-back Angle 
Adjustment Lever

■

Third Row Seat Access

Lever

Strap

Continued

217

uu

Seats

u

Second Row Seats

Co
ntrols

Your vehicle’s multi-functional second row center seat is removable.

1.

Store the center seat belt first. Insert the 
latch plate into the slot on the side of the 
anchor buckle.

2.

Retract the seat belt into the holder on the 
ceiling.

2

Seat Belt with Detachable Anchor

 P. 45

3.

Pull up the strap and fold down the second 
row center seat-back.

4.

Pull the lock release strap under the seat 
cushion, and lift the rear of the seat.

u

To lift the seat, grab the handle under 
the rear side of the seat cushion.

5.

Pull the seat-back slightly, then pivot it 
upward.

u

This unhooks the front of the seat from 
the floor.

■

Removing the Second Row Center Seat

1

Removing the Second Row Center Seat

Do not remove the seat while driving.

The multi-functional center seat can be used as the 
beverage holder when folded down.

2

Beverage Holders

 P. 234

To reinstall the seat, remove all objects and debris 
from the vehicle floor where the seat will be 
attached. Insert the front hooks into the front 
strikers, confirming that both are fully engaged. 
Begin to lower the rear of the seat; once the seat is 
within a foot of the floor, allow the seat to drop and 
lock to the rear floor strikers. Raise the seat-back to 
an upright position, grab the seat-back and rock it 
back and forth to confirm that all latches are secured.

Lock 
Release 
Strap

Handle

uu

Seats

u

Second Row Seats

218

Co
ntrols

Your vehicle’s second row outer seats are removable.

1.

Lower the head restraint to its lowest 
position.

2.

Move the seat to its rearmost position.

3.

Pull the seat-back angle adjustment lever, 
then fold the seat-back down.

4.

Pull the lock release lever, tilt the seat-back 
forward and lift the rear of the seat.

u

To lift the seat, grab the handle under 
the rear side of the seat.

5.

Pivot the rear of the seat upward to unhook 
the front of the seat from the floor.

■

Removing a Second Row Outer Seat

1

Removing a Second Row Outer Seat

Do not remove the seat while driving.

Reinstalling a Second Row Outer Seat

With the seat-back folded forward, insert the front 
seat hooks into the front floor strikers.

After confirming both front hooks are fully inserted 
into the front strikers, begin to lower the seat, then 
allow it to drop and lock to the rear floor strikers.

Raise the seat-back to an upright position, then rock 
the seat-back and forth to confirm both the inner and 
outer latches are securely locked into position.

Handle

Seat-back Angle 
Adjustment Lever

Lock Release Lever

219

uu

Seats

u

Second Row Seats

Co
ntrols

Your vehicle’s second row outer seats are slidable.

1.

Remove the second row center seat.

2

Removing the Second Row Center Seat

 

P. 217

2.

Pull up the handle at the side of the second 
row outer seat, then slide the seat.

■

Magic Slide

®

 2nd-Row Seats

1

Magic Slide

®

 2nd-Row Seats

When the second row outer seats are in slide (center) 
position, passengers have easier access to the third 
row seats.

220

uu

Seats

u

Third Row Seats

Co
ntrols

Third Row Seats

■

Adjusting the Seat Positions

1

Adjusting the Seat Positions

Once a seat is adjusted correctly, rock it back and 
forth to make sure it is locked in position.

Seat-back Angle 
Adjustment

Pull up the strap to 
change the angle.

Continued

221

uu

Seats

u

Third Row Seats

Co
ntrols

1.

Store the center seat belt first. Insert a key 
into the slot on the side of the anchor 
buckle.

2.

Retract the seat belt into the holder on the 
ceiling.

2

Seat Belt with Detachable Anchor

 P. 45

3.

Lower the head restraints to their lowest 
position.

4.

The right and left halves can be tucked 
away separately. Pull either strap to release 
the front leg lock of the third row seat.

5.

Continue pulling the strap to tuck the seat 
and strap away into the cargo area.

■

One-Motion 60/40 Split 3rd-Row Magic Seat

®

1

One-Motion 60/40 Split 3rd-Row Magic Seat

®

Remove any items from the cargo area before you 
tuck away the third row seat.

The instruction label is attached at the back of the 
third row seat-back.

When you tuck away one side of the third row seats 
and use the non-recessed part of the cargo area, 
make sure to secure the cargo. Loose items can fly 
forward and cause injury if you have to brake hard.

Straps