Honda Odyssey (2023 year). Manual in english - page 7

110

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

•

Appears when there is a problem with the battery 
charging system.

•

Have your vehicle checked by a dealer.

•

Appears when the scheduled maintenance is due 
soon.

•

Consequently, 

Maintenance Due Now

 and 

Maintenance Past Due

 follow.

2

Maintenance Minder Messages on the Driver 
Information Interface

 P. 593

•

Appears if there is a problem with the power sliding 
door system.

•

Turn off the main switch and manually operate the 
power sliding doors.

•

Have your vehicle checked by a dealer.

2

Opening/Closing the Power Sliding Doors 

 P. 174

U.S.

Canada

111

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

•

Appears when the engine coolant temperature gets 
abnormally high.

2

Overheating

 P. 661

•

Appears when there is a problem with the power 
tailgate system.

•

Manually open or close the power tailgate.

•

Have your vehicle checked by a dealer.

•

Appears when the starter system has a problem.

•

As a temporary measure, press and hold the 

ENGINE 

START/STOP

 button for up to 15 seconds while 

pressing the brake pedal and manually start the engine.

•

Have your vehicle checked by a dealer.

U.S.

Canada

Models with power tailgate

U.S.

Canada

112

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

•

Appears when you set the power mode to 
ACCESSORY or ON.

2

Starting the Engine

 P. 476

•

Appears when the engine does not restart 
automatically due to the following reason:

•

The hood is open.

•

There is a problem in the system that disables Auto 
Idle Stop.

•

Follow the normal procedure to start the engine.

2

Starting the Engine

 P. 476

•

Close the hood.

•

Appears when the steering wheel is locked.

•

Move the steering wheel left and right while pressing 
the 

ENGINE START/STOP

 button.

•

Appears when the power mode is in ACCESSORY.

—

•

Appears after the driver’s door is opened when the 
power mode is in ACCESSORY.

•

Change the power mode to VEHICLE OFF.

2

ENGINE START/STOP Button

 P. 188

Canadian models

113

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

•

Appears when you close the door with the power 
mode in ON without the remote inside the vehicle.

•

Disappears when you bring the remote back inside the 
vehicle and close the door.

2

Keyless Remote Reminder

 P. 190

•

Appears when the remote battery becomes weak.

•

Replace the battery as soon as possible.

2

Replacing the Remote Battery

 P. 632

•

Appears if the remote battery is too weak to start the 
engine or the key is not within operating range to 
start the engine.
A beeper sounds six times.

•

Bring the remote in front of the 

ENGINE START/STOP

 

button to be touched with.

2

If the Remote Battery is Weak

 P. 657

•

Appears if you press the 

ENGINE START/STOP

 

button while the vehicle is moving.

2

Emergency Engine Stop

 P. 658

•

Appears after the driver’s door is opened when the 
power mode is in ACCESSORY.

•

Press and hold the 

ENGINE START/STOP

 button with 

your foot off the brake pedal to change the power 
mode to VEHICLE OFF.

•

Appears when you attempt to change to another 
gear position with the transmission in 

(

P

 and the 

engine OFF.

•

To select another gear position while in 

(

P

, the engine 

must be ON.

•

Appears when you set the power mode to OFF while 
driving.

•

Immediately stop in a safe place, set the parking brake, 
then restart the engine. If the message disappears, 
continue driving.

114

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

•

Appears when the vehicle is stopped with the 
driver’s seat belt unfastened and there is a chance 
that the vehicle may roll unintentionally.

•

Press the 

(

P

 button before release the brake pedal 

when idling, parking or exiting the vehicle.

2

Shift Operation

 P. 486

•

Appears when the engine stops without the 
transmission in 

(

P

, and does not restart 

automatically.

•

Appears if you open the hood while Auto Idle Stop 
activates.

•

If you want to set the power mode to ON, change the 
gear position to 

(

P

.

•

If you want to start the engine, follow the normal 
procedure.

2

Starting the Engine

 P. 476

•

Appears when you change to 

(

N

, then release the 

(

N

 button.

2

If you want to keep the transmission in 

(

N

 

position [car wash mode]

 P. 488

•

Appears when car wash mode is not available due to 
hot transmission.

•

When transmission is too hot, car wash mode may not 
be available. Let the engine idle and cool down 
transmission.

2

If you want to keep the transmission in 

(

N

 

position [car wash mode]

 P. 488

•

Appears when you try to change the gear position 
without depressing the brake pedal.

•

Depress the brake pedal, then select a shift button.

115

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

•

Appears when you try to change the gear position 
without releasing your foot off the accelerator pedal.

•

Release your foot off the accelerator pedal, then select 
a shift button.

•

Appears when the 

(

P

 button is pressed while the 

vehicle is moving.

•

Appears if you change the gear position to 

(

R

 while 

the vehicle is moving forward, or to 

(

D

 while the 

vehicle is reversing.

•

Make sure that the vehicle comes to a stop before 
operating the select button.

•

Appears when you set the power mode to ON 
without fastening the driver’s seat belt.

•

Appears when you change the gear position after 

(

P

 has been automatically selected with the driver’s 

door open, the driver’s seat belt unfastened, then 
the brake pedal is released.

•

Fasten the seat belt properly before you start to drive.

2

Shift Operation

 P. 486

•

Appears when you set the power mode to VEHICLE 
OFF, if the rear doors were opened shortly before or 
after the vehicle was powered on.

•

Check the rear seat for passengers or items before 
exiting the vehicle.

2

Rear Seat Reminder

 P. 223

•

Appears when depressing the accelerator pedal 
while the gear position is in 

(

N

.

•

Remove your foot from the accelerator pedal. When 
driving, depress the brake pedal and change the gear 
position.

(White)

116

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

•

Appears when you press and hold 

(

N

 button for 

more than two seconds.

•

Disappears when you set the gear position to other 
than 

(

N

.

2

If you want to keep the transmission in 

(

N

 

position [car wash mode]

 P. 488

•

Appears if there is a problem with the cooling 
system.

•

Drive slowly to prevent overheating and have your 
vehicle checked by a dealer as soon as possible.

•

Appears if there is a problem with the headlights.

•

Appears while driving 

- The headlights may not be 

on. When conditions allow you to drive safety, have 
your vehicle checked by a dealer as soon as possible.

•

Appears if there is a problem with the parking sensor 
system.

•

Check if the area around the sensor(s) is covered with 
mud, ice, snow, etc. If the indicator(s) stays on or the 
beeper does not stop even after you clean the area, 
have the system checked by a dealer.

Models with parking sensor system

117

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

•

Appears if the automatic brake hold is automatically 
canceled while it is in operation.

•

Immediately depress the brake pedal.

•

Appears when the automatic brake hold system is 
turned off.

2

Automatic Brake Hold

 P. 565

•

Appears when the automatic brake hold button is 
pressed without wearing the driver’s seat belt.

•

Fasten the driver’s seat belt.

2

Automatic Brake Hold

 P. 565

•

Appears when the automatic brake hold button is 
pressed without depressing the brake pedal while 
the automatic brake hold is in operation.

•

Press the automatic brake hold button with the brake 
pedal depressed.

2

Automatic Brake Hold

 P. 565

•

Appears when the parking brake is applied 
automatically while it is in operation.

2

Automatic Brake Hold

 P. 565

2

Parking Brake

 P. 561

118

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

•

Appears when you pull the electric parking brake 
switch without depressing the brake pedal.

•

Depress the brake pedal to release the parking brake.

2

Parking Brake

 P. 561

•

Appears as soon as a problem is detected in the 
keyless access system.

•

Appears constantly 

- Have your vehicle checked by a 

dealer.

•

Appears as soon as a problem is detected in the push 
button starting system.

•

Appears constantly 

- Have your vehicle checked by a 

dealer.

•

Appears if there is a problem with the Auto high-
beam.

•

Manually operate the headlight switch.

•

If you are driving with the high-beam headlights when 
this happens, the headlights are changed to low beams.

119

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

•

Appears if there is a problem with the fuel pump 
system.

•

Set the power mode to OFF for a while, then set the 
power mode to ON. The message disappears if there is 
no problem. If the message appears again, take your 
vehicle to a dealer.

•

Appears if there is a problem with the engine 
management system.

•

Set the power mode to OFF for a while, then set the 
power mode to ON. The message disappears if there is 
no problem. If the message appears again, take your 
vehicle to a dealer.

•

Appears if there is a problem with the ignition 
system.

•

Set the power mode to OFF for a while, then set the 
power mode to ON. The message disappears if there is 
no problem. If the message appears again, take your 
vehicle to a dealer.

•

Appears if there is a problem with the seat heaters.

•

Turn off the seat heaters until the message disappears. 
If the message appears again, take your vehicle to a 
dealer.

•

Appears if there is a problem with the climate 
control system.

•

Turn off the climate control system until the message 
disappears. If the message appears again, take your 
vehicle to a dealer.

120

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

•

Appears when you unlock and open the driver’s 
door while the engine is running by remote engine 
start.

2

Remote Engine Start with Vehicle Feedback

 P. 478

•

Flashes when the system senses a likely collision with 
a vehicle in front of you.

•

Take appropriate action to prevent a collision (apply the 
brakes, change lanes, etc.)

2

Collision Mitigation Braking System

TM

 (CMBS

TM

)

 

P. 512

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

•

Appears when ACC with Low Speed Follow has 
been automatically canceled.

•

You can resume the set speed after the condition that 
caused ACC with Low Speed Follow to cancel improves. 
Press the 

RES/+

 button.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

•

Appears when pressing the 

–/SET

 button while the 

vehicle is moving and the brake pedal is depressed.

•

ACC with Low Speed Follow cannot be set.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

•

Appears if the VSA

®

 or traction control function 

operates while ACC with Low Speed Follow is in 
operation.

•

ACC with Low Speed Follow has been automatically 
canceled.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

121

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when the distance between your vehicle 
and the vehicle ahead of you is too close while ACC 
with Low Speed Follow is in operation.

●

ACC with Low Speed Follow has been automatically 
canceled.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

●

Appears when pressing the 

–/SET

 button while the 

distance between your vehicle and the vehicle ahead 
of you is too close.

●

ACC with Low Speed Follow cannot be set.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

●

Appears when the driver’s seat belt is unfastened 
while your vehicle is automatically stopped by ACC 
with Low Speed Follow.

●

ACC with Low Speed Follow has been automatically 
canceled.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

●

Appears when pressing the 

–/SET

 button while the 

driver’s seat belt is unfastened.

●

ACC with Low Speed Follow cannot be set.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

●

Appears when the speed of the vehicle is too high for 
you to set ACC.

●

Reduce the speed, then set ACC.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

●

Appears when ACC is canceled due to excessive high 
vehicle speed.

●

Reduce the speed, then reset ACC.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

122

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when the vehicle ahead of you resumes 
driving, after your vehicle has been stopped 
automatically by ACC with Low Speed Follow.

●

Press the 

RES/+

 button or 

–/SET

 button or depress the 

accelerator pedal to resume.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

●

Appears when the shift position is changed to any 
position other than 

 while ACC with Low Speed 

Follow is in operation.

●

ACC with Low Speed Follow has been automatically 
canceled.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

●

Appears when pressing the 

–/SET

 button while the 

shift position is in any position other than 

.

●

ACC with Low Speed Follow cannot be set.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

●

Appears when the vehicle is stopped on a very steep 
slope while ACC with Low Speed Follow is in 
operation.

●

ACC with Low Speed Follow has been automatically 
canceled.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

D/S

D/S

123

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when pressing the 

–/SET

 button while the 

vehicle is stopped on a very steep slope.

●

ACC with Low Speed Follow cannot be set.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

●

Appears when the parking brake is applied 
automatically while ACC with Low Speed Follow is in 
operation.

●

ACC with Low Speed Follow has been automatically 
canceled.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

2

Parking Brake

 P. 561

●

Appears when pressing the 

–/SET

 button while the 

parking brake is applied.

●

ACC with Low Speed Follow cannot be set.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

2

Parking Brake

 P. 561

●

Appears if ACC with Low Speed Follow is canceled 
while your vehicle is automatically stopped by ACC 
with Low Speed Follow.

●

Immediately depress the brake pedal.

124

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

•

Appears if ACC with Low Speed Follow cannot be 
set due to repeated deceleration, driving on a long 
downward slope, or excess vehicle weight.

•

Wait awhile, then reset ACC with Low Speed Follow.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

•

Appears just before the ACC with Low Speed Follow 
is automatically canceled due to repeated 
deceleration, driving on a long downward slope, or 
excess vehicle weight. (Will automatically open until 
the distance between your vehicle and the vehicle 
ahead is the maximum set in distance settings.)

•

Appears when the ACC with Low Speed Follow has 
been automatically canceled.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

•

Appears when 

-/SET

, 

RES/+

, 

CANCEL

, or interval 

button is pressed while ACC with Low Speed Follow 
is off.

•

After pressing the 

 button, press the 

-/SET

, 

RES/+

, 

CANCEL

, or interval button.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

•

Appears when interval button is pressed while Cruise 
mode is selected.

•

After selecting ACC with Low Speed Follow, press the 
interval button.

2

Adaptive Cruise Control (ACC) with Low Speed 
Follow

 P. 523

125

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

•

Appears when the vehicle is driving out of a detected 
lane. The steering wheel vibrates rapidly.

•

Keep the vehicle within the lane you are driving.

2

Lane Keeping Assist System (LKAS)

 P. 539

•

Appears when the vehicle is driving out of a detected 
lane.

-

The steering wheel vibrates rapidly when the 
vehicle is drifting out of a detected lane.

-

The steering wheel vibrates rapidly when the 
vehicle is drifting out of a detected lane. The system 
also steers the vehicle to help you remain within 
your driving lane.

•

Keep the vehicle within the lane you are driving.

2

Road Departure Mitigation (RDM) System

 P. 548

•

You can change the setting for the road departure 
mitigation system. 

Normal

, 

Wide

, 

Warning Only

 and 

Narrow

 can be selected.

2

Customized Features

 P. 413

•

Appears when the vehicle is likely to drive out a 
detected lane.
The RDM system also steers the vehicle to help you 
remain within your driving lane.

—

•

Blinks when you fail to steer the vehicle. The beeper 
sounds simultaneously.

•

Operate the steering wheel to resume the LKAS.

Lane Keeping Assist System (LKAS)

Road Departure Mitigation (RDM) System

When you selected Warning Only

When you selected Normal, Wide or Narrow

Road Departure Mitigation (RDM) System
When you selected Narrow